Checking your session…

Admin Console

The application, in figures

Counts across every team, not one. Press a figure to open the section that governs it. A figure that has not arrived yet shows — rather than nought — a zero that means “not loaded” cannot be told from one that means “none”.

Configuration at a glance

The application-wide switches as they stand right now, read back from the database rather than from what this page last wrote. Off is not a warning: a deliberately quiet system is a correct one. A row is marked only where a setting’s own values contradict each other — switched on, and configured so that nothing can actually be checked.

Recent activity

Composed from what this database actually records: teams, boards and accounts as they are created, System Admin role changes, and retention runs. Several kinds of administrative change are recorded nowhere at all — the Audit section names them, so a quiet list is never mistaken for a quiet system.

Lifecycle safeguards

Inactivation and deletion are server-authorized operations with dependency checks, confirmation, audit, and deterministic recovery.

Never cascade-delete people, teams, boards, groups, tasks, OKRs, or history from a list action. Show dependencies and block unsafe mutations.

Canonical scope

All counts and relationships resolve from organization and team IDs, never display names.

Audited changes

Actor, old/new state, dependencies, reason, timestamp and source surface are recorded.

Every objective in the application is a cleanup candidate. Candidate status is not proof that deletion is safe — every dependency is re-checked inside the authorized server transaction immediately before anything is removed.

Cleanup safeguards

Candidate classification and destructive mutation are separate operations.

Never delete an objective because it appears in this list. Its record, permissions, key results, links, updates, comments and audit evidence are re-read inside the authorized server transaction, immediately before anything is removed.

Authorization

System admin, re-verified on the server for every delete — never a hidden button alone.

Concurrency

“Delete all” for a team is refused if that team’s objectives changed since this list was read.

Audit

Every delete is its own authorized server call — nothing here bypasses that record.

Partial failure

A multi-select delete reports success or failure per objective, never one outcome for the whole batch.

Account retention

Notifies, then permanently deletes, accounts that have gone dormant. Their shared tasks, notes, boards and objectives are handed to another owner first, and every deletion is kept in the audit view below.

Idleness here is measured from each account's last sign-in, which only means what it says because sessions themselves now expire after 48 hours. A first-notice threshold has to clear that margin, or it would be measuring a session that is merely still open rather than an account that has gone quiet — the database refuses a setting that does not.

First notice (days)
Final notice (days)
Deletion grace (days)
Keep deletion log (months)

All accounts

Every account in the application, with its team, its roles and when it was last seen. Filter by team, narrow to system administrators or dormant accounts, and select rows to activate, deactivate or delete them.

Deleted accounts

Every account this feature has permanently deleted, what was transferred and to whom, and whether the deletion completed cleanly. Metadata only — nothing that was deleted is kept here.

Password strength

Applies to new accounts and password changes made through the sign-in page. Each level includes everything the level below requires.

The checklist above is drawn in the browser; the floor underneath it is not. Anyone can call the sign-up API directly without ever loading this page, so the checklist is a stated, visible standard and the enforceable floor is Supabase → Authentication → Policies. As of 4 October 2026 that floor is set to match Medium — at least 10 characters, at least one letter and at least one number — with the leaked-password check on, and the API refuses anything weaker.

Changing the level here does NOT move that floor. It is a setting in Supabase's own dashboard, not in this application, so raising the level above leaves the API accepting passwords this page would refuse until somebody raises the floor too. password-floor-check.py fails the build when the two disagree.

Two of the stricter rules can never be enforced there, whatever is configured: Supabase can require character groups and nothing else, so “no character three times in a row” and “must not contain your email name” stay browser-only at High and Extra-High.

Storage (Cloudflare R2)

Where screenshots and attachments are stored. App admins only, and a confirmed MFA session is required. The secret is stored encrypted and is never shown again. Test connection checks the endpoint, the credentials, the bucket, a write and delete, and a browser read; Save runs the same test first and refuses values that fail it.

In use
—
—
—

Attachment size limit

The largest single file anybody may attach: 5 MB unless changed here, and never more than 25 MB. The storage signer refuses a bigger upload itself, so this is the rule and not a suggestion, and it takes effect the moment it is saved. Files already stored above a new, lower limit are unaffected and stay downloadable — the size is checked when something is added, never afterwards.

List paging

How many rows each request fetches from the database, and how many older completed tasks one press of Show older adds. It applies to every organization the moment it is saved. Every list still loads in full — this only changes how it is fetched.

System administrators

A System Admin can open this console, read and change every account, administer every team and board, and permanently purge team content and files. A Team Admin is a different and much narrower role — it grants authority inside one team only. Grant or revoke this from an account's Profile in the People tab.

Not loaded yet.

Recent role changes

Every grant and revoke, with who made it. Metadata only — nothing about credentials is recorded here.

Teams

Which teams may send, and which events they send. A team ships off and stays off until somebody turns it on here or in the team's own settings — the two write the same columns and always agree. The Application email switch still outranks every row here: while it is off, nothing here sends.

Not loaded yet.

Email health and delivery audit

Every delivery the application has attempted, and what became of it — the event, who it was for, the address it actually went to, and why it stopped if it did. Suppressed is not failed: a suppression is the system deciding not to send, and it is counted separately everywhere on this block. Only a genuine delivery failure can be selected and tried again. Retry puts messages on a queue and Send queued is what actually delivers them — two acts, two controls, and the second one reaches real inboxes. The sender re-runs every gate it ran the first time, so a message a switch now stops is suppressed rather than sent.

Health

Reading…

Deliveries

Application email

Whether the application may send notification email at all. Turning this off stops every mention, assignment, share and ownership email across every team — the Message Center carries on exactly as it is. Signing in, password resets and other account email are not affected by this switch and continue whatever it is set to.

Email bench

Try a notification before switching it on for anybody. Nothing here changes a setting, and it can only ever send to the addresses on your own account.

Which notification to try.

Shows how several updates about one subject arrive as one email. The sample is invented. Applies to Preview and Send to me.

What does it look like?

The real template, with sample content and a banner a real notification does not carry.

Which of your own addresses receives it — there is no recipient field, deliberately, and it cannot name a new one. Default follows this event’s own routing and names the address it lands on.

Send to me delivers what the preview shows, even while Application email is off.

Would it actually send?

Walks the same gates the sender walks and reports where it would stop.

Team narrows the switches checked; Recipient is the person the gates are read for.

Trace sends nothing, records nothing and reveals no addresses.

    Live editing

    Whether anyone in STRIDE may edit shared notes, task checklists and comments together as they type.

    More about this

    Turning this off stops live editing in every organization within about a minute. Each organization keeps its own setting, and that setting applies again when this switch is turned back on. With live editing off, everything saves the way it did before live editing existed: a colleague’s changes appear when the note or task is reopened or refreshed, and a save that would overwrite a newer change is refused instead of being lost.

    How often an open page checks whether someone else has the same note, task, board or OKRs open. It applies to everyone. A person working alone opens no live connection at all: their page only makes this check, one small database request each time. Live editing starts when someone else opens the same item. Lower goes live sooner. 3 to 60 seconds.

    seconds

    Organizations

    Not loaded yet.

    Turn live editing on for one organization or several at once.

    More about this

    An organization’s owner can also change their own setting in Team settings → Organization; both places change the same setting, so they always agree, and every change is recorded in Audit. The Live editing switch for the whole system outranks every row here: while it is off, no organization is live.

    What changes, and when

    Within about a minute

    Notes, checklists and comments already open follow the switch. Nobody is reloaded and nothing typed is lost.

    Off is the old behavior

    No live connection and no presence. Changes from others appear on reopen or refresh, and conflicting saves are refused rather than overwritten.

    Enforced by the database

    The live channel itself refuses an organization or a system that is off, not just this page.

    Recorded

    Every change records who made it, the old and new values, and when. Read it in Audit.

    Which flows require verification

    Each of these is a page somebody with no account can open, and each is independent of the others. While the switch below is off none of them is challenged, whatever these say.

    Turnstile

    Cloudflare Turnstile puts a challenge in front of the pages anybody can reach without signing in. It is off until it is switched on here, and while it is off the flows above behave exactly as they always have. Signing in with a correct password is never challenged — only the three flows named above.

    Site key

    The public half of the pair, from the Turnstile widget in your Cloudflare dashboard. Every visitor’s browser is served it by design, so it is not a secret and showing it here reveals nothing that is not already on the wire.

    More about this

    Nothing on this page can check that this is the right key, and no check below does either — Cloudflare offers no way to verify a site key from a server. A wrong one fails silently and distinctively: the challenge simply never appears, and everybody on a challenged flow is asked to complete a check that is not on screen. If verification is switched on and nothing seems to happen, compare this character for character with the Cloudflare dashboard before looking anywhere else.

    Secret key

    The private half. It is written and never read back — this field submits and clears, the database answers only whether a secret is present, and nothing on this page can display, echo or partially reveal it. If it has been lost, roll a new one in Cloudflare and save that; there is no way to recover this one from here, deliberately.

    Is the secret one Cloudflare accepts?

    Asks Cloudflare directly, with a token that is meant to be refused, and reports what came back. Stored is not the same as working — a secret that Cloudflare rejects leaves human verification switched on and verifying nothing. Nothing is sent, saved or changed by this check.

    More about this

    It answers about the secret and nothing else. The token it sends is meant to be refused, so the site key is exercised at no point — a green answer here is entirely compatible with a wrong site key and a feature that does not work. Whether the pair actually challenges anybody can only be established in a browser, on the sign-in page.

    Storage Explorer

    Visualize. Explore. Manage. Keep the footprint intentional.

    Storage by Team and Data Type

    Select a tile to filter. Area is total storage.

    Attachment bytes are exact. Everything else is an estimate of row content — deleting rows makes that space reusable inside Postgres, it does not shrink the database file.

    Age Distribution

    Select a bar to filter by age range.

    Data Type Breakdown

    Select a type to filter.

    Largest Attachments

    Storage by Team

    Every task is counted, not just the ones on a board. An individual task is reported under its owner’s default team, or their first team if they have set none. People who belong to no team appear under No Team / Personal. Where a task is reported never decides what a purge deletes: a team’s policy only ever removes content that reaches it through a board it is actually on.

    Quick Actions

    Application-wide totals, every figure labeled

    Supabase capacity here is deliberately small, so this page exists to keep the footprint intentional. Exact and estimated are marked on every figure. These totals are application-wide and do not change when a filter is applied.

    Where the space is

    Every consumer ranked, including personal footprints

    Teams and personal footprints in one ranked list, each with a next step that configures and previews rather than deleting. Personal rows are aggregated — a name, a count and a size, never the contents of somebody’s private tasks.

    User Traffic and Audit Trail

    See who is using the system, what they are doing, and how activity trends over time. For which features people use, see Feature usage.

    What has changed

    Every administrative change this application records, newest first. Metadata only — nothing that was deleted or changed is kept here, and a role record stays readable after the account it describes has gone.

    Role changes are retained indefinitely. Every System Admin and God Mode grant or revoke is exempt from automatic deletion — not subject to any retention period, configurable or otherwise — because it is the only record this application keeps that a privilege was ever granted. Retention run history is exempt for the same reason: it is the record of what an earlier purge did.

    What nothing records

    These changes leave no trace in the database, so their absence from the list above means nothing either way. Keeping this list honest matters more than making it short: an administrator reconciling an account of events needs to know which silences are real.

    Browser errors

    Failures readers' browsers reported on their own — an error nothing caught, a background request that failed with nobody waiting for it, a part of the app that did not load. One row per failure, with how often and for how many people. Messages are scrubbed before they leave the browser: email addresses, quoted text such as a task or note title, tokens and links' query strings are removed, and nothing records who it happened to. Kept 30 days, then deleted automatically.

    Feature usage

    Counts of use, never content. Kept 90 days per person, then as monthly totals for 25 months.

    More about this

    Nothing records what anyone wrote, any title, link or page address. Who pressed a control is used only to count distinct people and is never shown. A feature is called unused only after it has been listed for 30 days, over a window of 30 days or more, on a page at least 10 people used.