Your account
Your account
Who you are signed in as
Your initials are at the top right of every page — they are the link: hover them and they name you, press them for a menu, and choose Profile & account to open your first and last name, an optional alternate email, where your notification email goes, an optional mobile number, and Change password…. One Save covers the whole panel. The control is an icon rather than a word, so hovering it still names you, and a screen reader still reads your name, at every width.
The first row of the panel is your Username: the label sits beside your email, and that address is the one you sign in with. Next to it is the Terms and conditions button, which opens the terms; see Terms and conditions below.
Notification email
Security
Delete account
The whole Account panel, top to bottom. Your sign-in address is shown but cannot be edited here. The first and last name is what shared tasks are matched against; everything below it — the alternate address, where notifications go, the mobile number — is optional. Change password… opens a card of its own, and Delete my account… — in the Danger zone, under your email signature — its own confirmation. When the dialog is narrower than about 900px the Danger zone is the last section. One Save covers the whole panel.
Sign out other browsers
Under Security, Sign out other browsers… is for a phone or computer you signed in on that is lost, sold or shared. Press it and the card asks Sign out other browsers?; confirm and it says Signed out everywhere else, and whether any other browser had been confirmed with a code. Every browser except the one you are using is signed out, and each asks for an emailed code the next time it is used. This browser stays signed in. It is an action, not a setting, so nothing here needs Save. If the other browsers could not be signed out, the card says so and nothing was changed — press it again. The row only appears when your organization asks for an emailed code at sign-in. Changing your password does the same thing.
Your name decides which shared tasks you see
A task from a team board appears on your personal list when its owner or assignee matches your first and last name exactly — "Kate R" does not match "Kate Ross". If shared tasks are not appearing where you expect, check the spelling here first.
Just left of your initials sit the theme buttons — Dark, Light, and Custom, which appears whenever a custom color is set. The one that looks pressed is the theme you are in. Which of the three you last used is remembered per browser; the color itself is saved on your account and follows you to any machine. Set one in Settings → Workspace → Appearance.
Terms and conditions
Under Profile & account, beside your Username, the Terms and conditions button opens the terms of use for STRIDE to read. The text is shown with its version number and the date it took effect. Close it with Close, the ✕, Escape, or a click outside it. Reading changes nothing. The terms cover how STRIDE may be used, what happens to your information, when AI features send content and where it goes, and how you can remove your account. They give no contact address: for a suspected break-in, change your password; to leave, use the Danger zone; for a copy of your data, use Settings → Your data; for questions, use Help or Ask STRIDE.
A reader who has not yet accepted the current version sees them before anything else, in a dialog titled Terms and Conditions. The dialog cannot be dismissed: there is no ✕, and Escape and a click outside it do nothing. Accept stays unavailable until you have scrolled to the end of the text and ticked I have read and agree to the Terms and Conditions. The only other choice is Sign out. Until you accept, nothing else in STRIDE is open to you. If the terms change in a way that needs your acceptance again, the dialog says We've updated our Terms and Conditions and shows the new version, and you accept it the same way.
The line under the text tells you where you are. It reads Loading the terms… while they arrive, then Scroll to the end of the terms to continue., and You have reached the end. You can now accept. once you have. If they cannot be fetched it says The terms did not load, so you cannot accept yet. and offers to try again. If a newer version was published while the dialog was open, pressing Accept says The terms were just updated. Please read the new version. and loads the new text, which you read to the end and accept in the same way.
Accounts that already existed when the terms were introduced are accepted automatically. STRIDE records version 1 as accepted for them, so they are not shown the dialog. That record is an assumption, not a click: the read-only view says that version 1 applies to your account from the day STRIDE introduced its terms. The text is still there to read at any time.
The terms gate is on. The current terms are version 2, effective 12 November 2026. It changed how long backups are kept: the first backup of each month is now kept for 12 months, so deleted data can stay in one for up to 12 months, and backups are encrypted. Every account that already existed on 12 November 2026 was accepted automatically for version 2, so it is not shown the dialog. Its read-only view says Version 2 applies to your account from November 12, 2026, when STRIDE updated its terms. You did not need to accept it again., and What changed shows a short note of the change. On 20 November 2026 STRIDE published version 3, a clerical change: the web address in section 1 is now www.strideos.me, and nothing else changed. Nobody needs to accept version 3, so no dialog appears for it. The read-only view shows the version 3 text, adds Updated on November 20, 2026 — no action needed. after the version that applies to your account, and What changed shows the note. A new account accepts the current text in the dialog. If a later version needs your acceptance again, the dialog says We've updated our Terms and Conditions, shows the version and its date, and a short note of what changed.
The terms end with the line © 2026 STRIDE by HCA Tech Solutions. All rights reserved. STRIDE is the product; HCA Tech Solutions is the company that makes it.
The menu under your name
Press your initials to open it. The menu opens with your name and, under it, Username: followed by the address you sign in with. There is no separate settings cog anywhere in the bar — this menu is where all settings live, on every page of the suite. In order:
- Profile & account
- My settings — called "My" rather than plain "Settings" because several pages have settings of their own; this one is yours.
- Team Settings — directly under My settings, only if you administer a team, as its owner, a super team admin, or a team admin; opens Team settings on its Team tab.
- Any actions or settings the current page contributes — only the team board does, with Export this board…, Task import… and Board settings…, which its Actions menu lists too. (Every other page keeps its own in an Actions menu in the page’s top: Notes settings… on Notes, OKR Settings on OKRs, Events access… on Events.)
- Admin console — only if you administer the application or hold God Mode.
- — a divider —
- Help — a submenu: Ask STRIDE, Help center (this manual, in a new tab), Did you know? and Quick Start guide.
- — a divider —
- Sign out
Which conditional rows appear is decided by your role and your organization, never by which page you are standing on. At the foot of the menu sits the company line and, beneath it, when the application was last updated — not your own data, so it does not move when you save something.
John Doe
Updated Sep 4, 2026, 4:12 PM CDT
The menu under your initials, in order. Team Settings, page-contributed rows and Admin console appear only when your role grants them; Help sits in its own section, below a divider, just above Sign out.
Your Organization Token, and joining or leaving an Organization
An Organization Token is the invitation code an Organization sends when it invites you. If you do not have an account yet, Create Account offers an optional Organization Token field — enter it there to link your new account to that invitation immediately. It is genuinely optional: an invalid, expired or missing token never stops an account being created.
If you already have an account, or left the field blank, the invitation is not lost — a pending invitation to your email address shows up in your Messages, headed by the inviting Organization's name. Accept it directly from the card, or press Copy token to grab the code. If it says the token expired, Regenerate token button replaces it with a fresh one on the very same invitation — nobody has to be invited again.
Only you, the invited recipient, can ever see or copy your own token — not a teammate, not an administrator.
Your current Organization, your role, and Leave Organization are in the Organization card on the Account tab of My settings, below your profile; an Organization Owner sets the organization’s AI assistant and Datadog in Organization settings → Organization. Being the only administrator holding one of its Teams no longer blocks you — the Organization Owner takes over that Team the moment you leave. If you are the sole administrator holding one of its Boards, though, leaving is still blocked until you hand that off to somebody else first.
Your email signature
Your signature is set here, in Account, and it is the one that ends the follow-up emails you draft from a task (see Working from an email). My Settings → Email now points here and no longer holds the signature. A drafted email carries it as plain text: Copy text copies its words, and Open in Outlook leaves its links out, so the formatting, images and links you set here are not in the email you paste or open.
Open Account and the signature is on the right, beside your profile, with a preview of the formatted signature (its label, How recipients see it, describes the signature as formatted here, not what Copy text or Open in Outlook carry). Type it, or use the toolbar:
- Formatting: bold, italic, underline, size, color and undo, the same bar as the other editors.
- Link adds a web address, an email address or a telephone number. A link must start with
https://,mailto:ortel:; anything else is refused and nothing is added. - Image adds a PNG, JPEG or GIF from your computer. It is shrunk to fit one of three sizes, never enlarged: Icon 20 (within 20 by 20 pixels), Small 120 (within 120 by 200) and Logo 200 (within 200 by 200). Pick a selected image to change its size, its alt text, its link or to remove it. Each image must be 32 KB or less after shrinking, and a file over 10 MB is refused before it is read. GIF animation is not kept.
- Icon adds a small symbol at 20 pixels.
- Paste from Outlook… opens a box. In Outlook, go to Settings → Account → Signatures, select your signature’s text, copy it, and paste it into the box. Check the result, and press Use this to bring it in. Nothing is changed until you do.
While your signature is read, the editor says Loading your signature…. An empty signature shows Your signature will appear here. in the preview. The formatting bar is labeled Signature formatting. A paste that brings in nothing STRIDE can keep says Nothing to show.
Dark theme. The editor follows your theme: in the dark theme it has a dark ground and your text, links and colors are lightened so they stay readable, and in the light theme it is white. This changes only how the signature looks on your screen, never the signature you save. The preview’s Light mail and Dark mail buttons start on your current theme (Dark mail in the dark theme, Light mail in the light theme); press the other one to check how the signature reads for a recipient whose mail is the other way round.
The signature has limits: 6 images, 20 links, 2,000 characters of text and 100 KB in all, images included. The size line under the editor says how much of each you have used, and the preview says why it cannot show a signature that is over a limit.
Remote images. A paste can carry pictures that live on a web page rather than in the message. STRIDE cannot fetch those, so each one appears as a dashed tile that says Upload. Click it, or press Enter on it, and choose the picture from your computer. Until every tile is uploaded or removed, Save is off and the note under the editor says how many are left.
What is never sent to an AI assistant: your signature. STRIDE adds it to the follow-up email itself, after the assistant has written the paragraphs, so the assistant never sees it.
If you have an older plain-text signature from My Settings, the editor opens with it brought over, marked as such. Nothing is saved until you press Save, which keeps it.
Your address book
STRIDE remembers the email addresses you type, so you do not have to type them twice. It is a card on the Account tab of My settings, named Address book, and it is yours alone.
What is saved, and when. An address is saved when you press Open in Outlook on a follow-up email, or on an email you started with Compose in the Create menu (in Email mode; Slack mode never saves an address), when you press Copy text there, or when you press Finish in Outlook on a meeting, never while you are still typing. Only addresses you typed count: the ones in a follow-up’s or an email drafted on the Compose page’s To or Cc, and the ones you added in a meeting as someone outside your organization. Colleagues you picked from your organization, your own addresses and addresses STRIDE found for you in an email are not saved. The next time you type in one of those boxes, STRIDE suggests matching saved addresses from the second character; press a suggestion, or use the arrow keys and Enter, to add it.
What you can do in the card.
- Remember addresses I type is a switch. Turn it off and nothing new is saved; what is already saved is still suggested.
- The search box narrows the list by name or address. Each row shows how often and when you last used it.
- Remove takes one address out. An Undo offer stays for a few seconds. Typing the address again saves it again.
- The … menu on a row (Address actions) has Never remember this address. It moves the address to Never remembered, where it is never saved or suggested again, until you press Allow again.
- Remove all… asks Remove all addresses? first, and leaves Never remembered as it is. It cannot be undone.
- Download CSV saves the list to your computer.
Who can see it. Only you. Not your team, not an administrator, and it is never sent to the AI assistant. It is not part of a team’s backup either; Download CSV is your copy.
How long it keeps them. Up to 500 addresses. When the book is full the one you used longest ago is dropped to make room, and an address you have not used for 12 months is forgotten. Addresses under Never remembered stay until you remove them. The whole book is deleted with your account.
Developer access: letting another system use your tasks
If you keep tasks in another system, STRIDE can let that system read and change your tasks for you. You give it a token: a long secret that stands in for you. It is a card on the Account tab of My settings, named Developer access, closed until you open it. Until STRIDE has switched this feature on, the card says The API is not switched on yet and offers nothing to press.
What a token can do. Exactly what you can do signed in, and nothing more. A task you cannot see stays hidden from it, and one you cannot change stays unchanged. A token that is Read only can look but never change anything.
Making one. Press New token, then:
- Give it a Name after the system that will use it, up to 60 characters.
- Choose Expires: 30, 90 (the usual choice), 180 or 365 days, or Never. Choosing Never shows a warning that a leaked token keeps working until you revoke it, and Create and copy stays off until you tick I understand.
- Choose Access: Read and write, or Read only.
- Press Create and copy. If you have not confirmed a code by email in the last 10 minutes, STRIDE emails you a 6-digit code first; enter it and press Confirm and create. While it works the card says Sending your code… and Checking your code…, and a code that is not six digits gets Enter the 6-digit code from the email. Send a new code asks for another.
The token is copied, never shown. STRIDE puts it on your clipboard and says Copied to your clipboard. Paste it into your other system straight away: STRIDE cannot show it again, and nobody at STRIDE can read it back to you. Copy again copies it again while that notice is open; Done closes the notice. If your browser refuses the clipboard, STRIDE says so; press Copy again once more, or revoke the token and make another.
The list. Each token shows its name, the first part of it (so you can tell which is which), what it can do, when it was made, when it was last used, and when it expires. A token that never expires, or expires within a week, is marked. The card’s line says how many are active and how many expire soon. You can have 10 active tokens.
Revoking. Press the bin on a token, then Revoke to confirm (Cancel backs out). Any system using it stops at once. Revoked tokens fold under Revoked. STRIDE emails you whenever a token is made or revoked, and once, a week before one expires, so a token you did not make is something you will hear about. Changing or resetting your password revokes every token you have.
Administrators. System Administrator and God Mode accounts can make tokens too, but a token never carries that extra reach: it sees and changes only what the same person could as an ordinary member, their own tasks and the boards they belong to. Anything they reach only as an administrator stays hidden from it. If an Organization Owner has turned the feature off for your organization, the card says Off for your organization; tokens you hold stop working and you cannot make new ones.
What has changed, and the documents. What’s changed in the API lists the latest three changes, with New on the ones you have not seen; Show all changes lists them all. Changes only ever add things, so a system built on today’s version keeps working. Download guide and Download OpenAPI save the guide to the API and its machine-readable description, with the address to send requests to.
Changing your password
In Account, under Security, press Change password…. You do not need your current password — we email a code instead.
- Press Send verification code. An 8-digit code goes to your sign-in address — never an alternate address — and expires in an hour. If it has not arrived, check spam, then Resend code.
- Type the code in.
- Choose the new password twice. The checklist underneath ticks each line as you satisfy it.
- Press Change password.
You stay signed in on this device; any other device signed in to your account is signed out and needs the new password. “Not valid or has expired” covers mistyped, too old, and already used alike — ask for a new code and try again; doing so makes the previous one stop working. Changing your password also makes every other browser ask for an emailed confirmation code the next time it is used.
This is not the same as Forgot password? on the sign-in page, which is for when you cannot get in at all. Both send mail no matter what you or your team have set for notification email.
Which address gets your notifications
In Account, under Notification email, choose which teams' notifications go to which of your two addresses: All teams, selected teams, or no email. All teams keeps working when you join a new one; selected teams does not pick up a new team automatically. Naming the same team on both addresses means both get a copy.
An alternate address has to be confirmed first — Send a code, then enter the six digits — before anything is sent to it. Until then it reads Not confirmed yet, so nothing is sent here. Once it is, it reads Confirmed — this address can receive notifications.
This only controls where notification mail goes. Sign-in and password reset codes go to your sign-in address, and to your confirmed alternate too only if you choose that — see where your verification codes go. And it decides where, never whether — which events are worth an email at all is set in Tasks; see choosing what emails you.
Where your verification codes go
Once your Alternate email is confirmed, a box appears under it: Send my verification codes to. Choose My sign-in email (the default) or My sign-in email and my alternate email, then press Save. With both chosen, the code that confirms it is you after your password, and the password reset code, go to both addresses.
- It is one code, sent twice. Either copy works, and the newest code is still the only one that works. Wrong attempts and the limits on sending count once, not once per address.
- The confirmation step says so. It reads We sent your code to your sign-in email and your alternate email, without showing the alternate itself, since nobody has finished signing in yet. Here in Account, with both chosen, it says Codes will also go to followed by the full alternate address, so you can check it is yours.
- Changing the alternate needs a confirmed sign-in. Sending its code and confirming it only work once you have finished signing in, including the emailed code.
- Some mail always goes to your sign-in email only: the code for Change password…, invitations, and the code that verifies a new account unless you had it sent to another address while creating the account.
- If your account was verified through your alternate email when you created it, and your sign-in email is not confirmed, your sign-in codes go to the alternate only and password reset codes go to your sign-in email only, whichever you choose here. Confirming your sign-in email (the sign-in screen offers a code there) from the browser you created the account in, signed in nowhere else, keeps everything and the alternate becomes your backup address. Confirming it from another browser removes that alternate, signs out every other browser and resets your settings, connected calendars, signatures and API tokens, in case somebody else set the account up; your tasks and notes are kept. Changing or removing that alternate means your next sign-in asks for a code at your sign-in email, and adding it back later does not undo that.
- One address, one account. An address that is already another STRIDE account’s sign-in email or confirmed alternate cannot be confirmed here: no code arrives, and the screen does not say why.
- Changing or removing the alternate puts your codes back on your sign-in email alone. Confirm the new address and choose again. An alternate that is not confirmed never receives a code.
- This is a good second route if a work email filter holds our mail: sign up with the address that does reach you, and add your work email here once your IT team allows our email.
Notifications that belong to no team
Some notifications belong to no team at all — a task assigned to you directly, a mention, a watch update, a reminder, a shared note — so the per-team rules above cannot route them. Anything with no team, below the two addresses, handles these: leave it on Use the rules above and they arrive at your sign-in address, exactly as they do today, or choose Sign-in address or Alternate address directly. A task on a board still follows its team regardless of this choice. If you pick an alternate address that is not confirmed yet, these keep going to your sign-in address rather than going nowhere, until it is confirmed.
Invitations are the exception — an invitation always goes to the address it was sent to, since you may not have an account yet.
Settings › Email: which events email you
When you customize your email, each event has its own switch. The defaults are:
- Comments without an @mention — on.
- Objectives and key results are updated — on.
- A followed board or lane changes — on.
- A shared note is edited — off.
- Meeting invites from colleagues — on.
Meeting invites from colleagues is under Meetings in the same list. It decides whether colleagues in your organization can add you to a meeting invite. Turn it off and they cannot add you, and you are not offered as a person to invite. See Meetings with people in your organization.
Your notes and personal tasks follow your own settings. A note, or a task on no team board, belongs to no team, so a team's email settings never apply to them. Comments on them reach you unless you customize your email and switch off Comments without an @mention; note edits reach you only if you switch on A shared note is edited.
You can see and remove the boards you follow here: each board or lane you follow is listed with a Stop following button. With none, it says You are not following any boards or lanes.
Deleting your account
In Account, in the Danger zone under your email signature, Delete my account… removes your account and everything in it, permanently and immediately. There is no recovery, and support cannot restore it. When the dialog is narrower than about 900px the Danger zone is the last section.
What is erased:
- every task you own, with its comments, reminders and watchers;
- every note you own, including ones you shared;
- your comments on other people’s tasks, notes and OKRs;
- your tags, uploaded files, settings and email signature;
- your place on every team and board, and your sign-in.
What is kept: your teams keep their objectives, key results and check-ins (without your name). A board you created passes to its next most senior member. A task someone else owns that was assigned to you stays with them, with a note saying so. A task you collaborate on stays with its owner, and its activity says a deleted account stopped collaborating on it, without your name. A team with nobody else on it is removed with your account.
To confirm, type the exact phrase shown — delete my profile — rather than clicking a yes/no prompt; pressing Enter does not submit it. Attachments are removed first, then the account itself — nothing is reported finished until it genuinely is.
This is a different control from an administrator deactivating or removing an account from the admin console (see the administrator manual); this one only ever acts on the account you are signed in as.
Sending your organization’s AI usage to Datadog
If your Organization uses Datadog, an Organization Owner can send the organization’s AI usage to their own Datadog account, so Datadog admins can chart cost by person. Each Organization connects its own: open Organization settings → Organization and press the header of the Datadog card, under Organization AI assistant. Only Organization Owners open that tab; other members do not see the card, but their Settings → AI says when it is on.
- Choose your Datadog site: US1, US3, US5, EU1, AP1, AP2, UK1 or US1-FED. It is the address you sign in to Datadog at, for example app.datadoghq.eu is EU1. (Datadog’s US2-FED site is not supported yet.)
- Paste the 32-character API key value (Datadog → Organization settings → API keys), not its Key ID (a longer ID with dashes) and not an application key, and press Save and send a test event. The key is stored encrypted and never shown again: the card shows the last four characters, who connected it and when.
- When the test passes, switch on Send to Datadog. A passing test in the last 24 hours is required. STRIDE asks Send AI usage to Datadog? and lists what goes before it starts.
What is sent: one event for each AI request made on the organization’s key: the feature, provider, model, tokens, estimated cost, outcome, and the person’s name and STRIDE id. Never what anyone wrote, what the AI replied, an email address, or any other activity. While the organization has an AI key every member’s AI requests use it, so every member’s AI request is included; only STRIDE support may choose their own key instead, and those are not. Nothing from before you turn it on is sent, and turning it off stops everything. STRIDE keeps its own record either way. Delivery is at least once, so a rare event can arrive twice, and an event more than 17 hours old is not sent.
If Datadog stops accepting the key the card shows Needs attention with the reason. Sending pauses, nothing is lost, and STRIDE sends what is still recent enough once you press Replace key. Send test event checks again; Recent deliveries lists the last ten batches. Disconnect (it asks Disconnect Datadog? first) deletes the key and stops sending at once. What Datadog already received stays in your Datadog account under your Datadog retention, outside STRIDE’s reach.
Charting STRIDE in Datadog
Each AI request arrives in Datadog’s LLM Observability (AI Observability) as one LLM span of the
application ml_app:str, about 15 minutes after it happens. (On US1-FED, which has no LLM Observability,
events arrive as Logs with service:str instead.) In Datadog:
- LLM Observability → Traces, filtered to
ml_app:str, lists every request: the span name is the feature’s job (for exampleide agenda.executiveBrief), with the model, the provider, the input and output tokens, how long it took and whether it worked. - LLM Observability → Cost charts the estimated cost by model and over time. Each span carries
STRIDE’s own estimate from list prices (the
price_refdate), not your vendor invoice. - The person is in the span’s tags
user_nameanduser_id(their STRIDE id), so you can filter or group by person; the feature title, organization and outcome are in the span’s metadata. Never an email address, a prompt or what the AI replied. - The test event is a span named
str.ide.test
AI insights
Owners see the same record inside STRIDE: press Open AI insights on the Organization AI assistant or Datadog card in Organization settings → Organization. Overview shows requests, tokens, estimated cost, people and refused requests against the previous period, with a chart; People, Features, Providers and models and Limits break it down. The tables show Requests, Input tokens, Output tokens and Est. cost (an estimate from list prices, with its Price reference date), Share of cost by person, and on Limits the Last refused time. Narrow by range (7, 30 or 90 days), person, feature, provider or outcome, and Export CSV the current view. It counts every AI request on the organization’s key, which every member uses while it is set; only STRIDE support may use its own key instead, and those are not counted. It shows counts, never what was sent. Opening it changes nothing.
Ask STRIDE, and what it sends
Ask STRIDE uses your own AI key, set in Settings → AI. Each question goes through STRIDE’s server to the AI provider you chose, on that key. It does not go to the provider directly from your browser.
- What is sent: your question; your last three questions and answers in the panel; the page you are on and what kind of panel is open; your role labels (for example Team admin) and yes or no facts about your access and setup; the names of the on-screen controls it may point at; the settings area you have open, if any, as a short area name such as Team settings › People; and the passages of this manual and of STRIDE’s how-to notes that match your question.
- What is never sent: your tasks, notes, comments, the names of people, teams or boards, email addresses, or any ID. Nor the value of any setting: Ask STRIDE learns which area you have open, never what is set in it. A name in an answer is filled in on your screen after the answer arrives.
- Ask STRIDE from a settings window. Team settings, My settings and Profile & account each have an Ask STRIDE button in their header, before the close button. It opens the panel beside the window, which stays open. On a wide screen the panel is a full-height strip on the right and the window moves left to make room; on a narrower screen the window gets narrower instead. When you close Ask STRIDE the window goes back to its own size and place. The panel is set to the area you are in: a chip such as My Settings › Calendar says so, and × on the chip clears it. The starter questions are written for that area. The area only decides which how-to notes are tried first; it never limits what you can ask, and it never changes who may read a note. The Ask STRIDE button in the top bar and ⌘/ (Ctrl /) do the same while a settings window is open, and pressed again with both open they move you between the window and the panel. Esc closes whichever of the two you are working in. The Administrator Console has no header button of its own: its one Ask STRIDE button is in the top bar. See Ask STRIDE on the console.
- What is kept: Your question and the answer are never stored. Each question keeps a record of the provider, token counts, knowledge version, outcome, time and your verdict, used for the hourly and daily limits and deleted after 30 days. A Was this right? verdict you give is part of that record. If you mark an answer right or wrong, that vote, your question, an excerpt of the answer and anything you write about what was wrong are also kept, for up to 180 days. Only God Mode holders can read them. A thumbs-up slightly raises the help passages behind that answer in later searches. A weekly job may use the thumbs-down notes to edit those help passages, with Claude, after names and email addresses are removed. A second weekly job groups new thumbs-down by the how-to the answer used and re-runs that how-to’s check; its report for the team carries counts and how-to names, never your question, answer or note. The note you can add after a thumbs-down is optional, and the vote also records which provider answered.
- Stop: Stop abandons the wait, but the question may still be answered, and spent, on your key.
- Show me sends nothing more, and saves nothing. It opens menus, tabs, folded sections and Settings on your screen, and goes to another page when the control is there. The page and the steps travel in your browser for that one trip and are forgotten when you arrive. A tab or section it opens is not remembered as your choice, and Stop closes it again.
- Take me there and Take the tour work the same way. They run on your screen, send nothing more and save nothing: they press, type and choose nothing for you. A tour you stop, or leave in the middle, is kept for Resume in this browser tab for ten minutes and then forgotten; it is never sent anywhere.
Without a key, and while STRIDE’s shared assistant (below) is off, Ask STRIDE sends nothing: it searches the manual on your screen.
Ask STRIDE with no AI key: STRIDE’s shared assistant
If you have no AI key at all, none of your own and none set by your organization, Ask STRIDE can still answer in your own words on STRIDE’s shared assistant, once a God Mode holder has switched it on. STRIDE’s own key answers, with the same full answers, steps and tours as your own key would give. It is there so you can get started; it is limited to 10 questions an hour (a rolling hour) and 30 a day to begin with, and a God Mode holder can change both.
- How many are left. The panel’s footer reads STRIDE’s shared assistant · 10 questions an hour. From your 6th question in the hour a note above the box says how many are left; from the 9th it turns amber, says when Ask STRIDE pauses, and the box shows the count. After the 10th the box is paused until the time it names (Next question at…), and anything you had typed stays in it. Search the manual instead still works, and is never limited.
- What counts. Every question that reaches the AI, including a follow-up, a Which of these did you mean? pick and Ask again, and one you stop. A question that timed out, one the reference had nothing for, Take me there, Take the tour and Show me do not count.
- Removing the limit. Set up your AI Assistant opens Settings › AI beside the panel. Once your key is saved the panel says so, runs on your key with no hourly limit, and your question is still in the box, one Enter away. An Organization Owner also sees Set an organization key for everyone, which opens Team settings › Organization › Organization AI assistant: one key there gives everyone in the organization full AI with no hourly limit.
- What is sent and kept. The same as with your own key, above. The call is recorded on STRIDE’s own account, never with your name, and your own record of the question notes that the shared assistant answered it, for the limits.
- When it is paused. If STRIDE’s shared assistant has reached its limit for the day, the panel searches the manual and says STRIDE’s shared assistant is paused for today. If your own key or your organization’s key stops working, Ask STRIDE never moves you onto the shared assistant: it tells you what is wrong with the key.
Ask STRIDE is also offered where questions come up: in the import dialogs, the Events editor, an empty list on Tasks (including Watching and On team boards), Notes (also when a filter hides every note), OKRs, Events or Boards, the first-run card on the team board, and Compose, from the top bar, in Email or Slack mode. When a God Mode holder has switched on starter help, a new Organization owner with no AI key can also ask setup questions on the first-run card and in the Organization, Teams, Boards, People, Groups and Swimlanes tabs of Team settings. Each question passes a quick security check (Security check…) while the panel shows Reading STRIDE’s starter help…, and the answers come from STRIDE’s own help, with no steps or tours; the panel says so. Until it is switched on, those places search the manual instead. While STRIDE’s shared assistant is on, those places use it instead of starter help. Settings → AI adds a key for full answers, steps and tours.
The AI capabilities list names the sign-in page’s own button Ask STRIDE before you sign in. It is on only when a God Mode holder has switched it on, needs no account, and answers about getting in from the public sign-in help; it sends the question you type (email addresses and numbers removed), your last two questions and the answers in the panel, never anything from your account. The sign-in help describes it from the other side.
What STRIDE counts about how you use it
STRIDE counts which controls are pressed — a tab, a menu row, a button — so the people who run it can see which features are used and which are not, and keep the product lean. That is all it counts.
- Never what you write. No task, note, comment, title, link or page address is part of it, and neither is what you typed into a field.
- Counts, not a diary. Presses are folded into a count per control per day. Nothing records the order you pressed things in or how long you stayed.
- Who you are is used only to count distinct people (ten people using a control, not one person ten times). It is never shown: the administrators’ view returns totals only.
- Seen only by God Mode holders, in the admin console.
- Kept 90 days, then only totals. The counts tied to your account are deleted after 90 days, and sooner if you delete your account; what remains are anonymous monthly totals for 25 months.
There is no switch for it, because it holds nothing about what you do with your work. Nothing is counted on the sign-in page.
The phone view and the admin console
Two parts of the product have manuals of their own, because what you need to know about them barely overlaps with what is above.
- Using it on a phone — the phone view is a separate, deliberately smaller page. It covers your tasks, and leaves out notes, AI, analytics and attachments.
- Administrator manual — accounts, invitations, deactivation and deletion. Only useful if you administer the app.