Checking your sign-in…
STRIDE Help Tasks Team
www.strideos.me

Calendar view in Tasks

Calendar view in Taskstasks.html?view=calendar

There is no separate "event" anywhere in this product. Every task with a due date is a calendar entry, and the Calendar view is where Tasks lays all of them out by day so you can see your week — and the weeks around it — at a glance. Nothing lives on this page that is not also a task you could find on Tasks or a team board; the calendar is a view over the same work, never a second record of it.

New here?

This page covers everything. If you just want the core loop, read the two-minute version first.

The Calendar is a view inside Tasks, with its own Calendar button in the navigation strip, right after Tasks (and in the minimalist left bar). Press it from any page to go straight to the Calendar; it opens on the view and the week, month or day you last left it on, in this session or a later one. On Tasks, Tasks and Calendar in the strip switch between the List and the Calendar without reloading, and the lit one shows which you are on. When the strip runs short of room, both become icons like the rest of the strip. From any other page, Tasks still returns to whichever of List or Calendar you used last. You can also use the List | Calendar switch at the top of Tasks, at the left end of the view row (press L for List, C for Calendar). On Week and Month, Organize and Collapse all are not drawn; they stay on List and Day. Old Calendar links and bookmarks still work — they land on the same day in the same view.

Switching between List and Calendar closes the task drawer, so nothing from one view is left hanging open in the other. Minimalist belongs to the List: on the Calendar you get the standard frame with the Utilities rail on the right, and pressing List puts the Minimalist layout back exactly as you had it.

By default it is your own calendar — exactly the tasks on your My tasks list — not a team-wide schedule. A task where you are only a collaborator appears under Watching, not on the calendar's My tasks list, and so does one you have turned Show in my tasks off for; neither is drawn here, counted in the strip at the top, or counted on the small month calendar.

The calendar shares the List's tabs, filters, search, Focus, bulk actions and task drawer, so a choice made in one is the same in the other. It also has the same Focus strip as the List: the six figures and your quick chips in one row (on narrower windows the date chips sit behind one Date button), with the By status and By tag breakdowns dropping down from its chevron. To put other work on the grid, choose its tab: Watching, On team boards or Completed are drawn on the calendar only while you have that tab chosen, and My tasks is the default every time. Completed work sits on the day it was done. When you apply a filter on the Calendar, the tab switches back to My tasks, so a filter always applies to the same set the grid is drawing.

Show tasks you have completed, in Customize › Show and hide, adds the tasks you finished to the grid on the day you finished them. It is off by default, applies to every tab, and is remembered. Done tasks drawn this way are for reading: they cannot be dragged to another day. The Completed tab shows them already, so the switch is not offered there. The Completed button in the Calendar's bar is the same switch for the view you are on (see Calendar options are in Customize).

Calendar options are in Customize

The Calendar's bar holds what you reach for every minute: Month, Week and Day, the date arrows and Today, the date, the Outlook button and Outlook · Connect until you have connected. Week agenda…, Show free time and New meeting… are in the Actions menu, in sections: Create (New meeting…), View (Week agenda…, and Show free time on Week and Day) and Page settings. Two small buttons sit after Outlook, just before full screen: Free time (Day and Week, once Outlook is connected) and Completed (Day, Week and Month, not on the Completed tab). They show only an icon at every window width; the name appears when you hover or focus one. Each is pressed (blue) while it is on, and is the same setting as its row in Customize. Completed is kept for each view separately. Every other choice about how the Calendar looks is in the Customize panel (the button on the Tasks page, or press V when you are not typing). The panel stays open beside the grid, so you can change an option and watch the Calendar respond. Each option keeps the same setting it always had; only where you reach it moved. In full screen the bar carries Customize and Actions before the exit button, because the page's own buttons are covered. On a phone, Customize fills the screen and hides the bar. Press Close Customize to reach Day, Week or Month; when a guided tour needs one of them, it asks you to close Customize first and opens it again after you press the view.

Day, Week and Month each keep their own task setup, separate from the List and from each other: the filters and quick-action chips you have pressed, Show the filter bar, Show the quick actions and Which quick actions, and in what order, Show tasks you have completed and the task size, plus Group tasks by and Sort tasks by in Day. These rows sit in the view's own section in Customize and are tagged with the view's name. A view you have not changed starts with the List's setup; after that, changing the List does not change it. Apply to all views copies the view you are on to the others once, with Undo; see Each view keeps its own task setup.

The panel shows only what applies to the view you are on, and redraws the moment you switch between List and Calendar or between Day, Week and Month, without moving. Your Find an option text and which sections you had folded stay. The Calendar's sections:

Theme and app font…, All settings… and Quick Start guide are in the panel's footer. A row or section that does not apply to the view you are on is not shown. A row that does apply but cannot be changed right now stays in place, dimmed, with the reason under it (Turn on free time first, Connect Outlook first), so you can see what turns it on. Find an option and Reset section work in the view you are on; Reset everything for Week view… (or Day, or Month) leaves options that exist only in another view as they are. The header, the tabs, the calendar bar and the panel stay one size whatever density you choose.

Hiding the tasks in one view

There is a Show tasks in switch for each view: Show tasks in Day view, Show tasks in Week view and Show tasks in Month view, all on until you turn one off. Off hides that view's tasks, their counts and their add buttons, so a meetings-only Calendar stays clean. Your Outlook meetings and free time stay. Nothing about the tasks themselves changes, and each view has its own switch, saved to your account. A view with its tasks hidden says so in the bar — Tasks are hidden in Day view. (or Week, or Month) — with a Show tasks button beside it, so the way back is on the screen. While Day's tasks are hidden, Where your tasks go in Day view and the By board and person panel say Tasks are hidden in Day view and the day takes the full width; your chosen layout is kept for when you turn them back on.

In Customize the same switch is one row, Show tasks in this view, and it follows the view you are on.

Month, Week and Day

With Calendar chosen, three tabs sit in the bar across the top of the grid: Month, Week and Day. Each shows the same tasks at a different resolution — a month for the shape of the quarter, a week for planning the days ahead, a single day when you want nothing else on screen.

Pressing a day opens it. In Week, the day's header — its name, date and the open and done line — is a button that switches to Day view on that date, and in Month the day number does the same, so you never have to go back up to the tabs. Hover shows the date underlined, and from the keyboard Tab to the header and press Enter or Space. Everything else in a column or cell behaves as before, and Week in the tabs brings you back.

Next to the view tabs, a back arrow, Today and a forward arrow step through dates at whatever resolution you are viewing. Today always means today, and the range it lands you on is named beside the arrows.

That name is the calendar's title: Monday, November 9 in Day, Nov 8 – 14 in Week and November in Month. The year is added only when it is not this year. Press the title (or Tab to it and press Enter or Space) to open a small month calendar and jump to any date. Today is marked and so is the date you are on; the arrows step a month, the arrow keys move between days, Page Up and Page Down change month, and Escape closes it and puts you back on the title. Choosing a day keeps your view and shows that date. In Day, the heading under the bar no longer repeats the date: it keeps the counts and Move all open.

Where you left off is remembered

The view and date you last looked at are both saved, so returning to the Calendar view puts you back where you were, not back on today. Press Today to return deliberately.

Hide the weekend: the work week

The briefcase button right after Month, Week and Day hides Saturday and Sunday in Week and Month, so you see the work week; press it again, or press W, to show the whole week. While the weekend is hidden the button is blue and its tooltip says Show weekends. The same switch is in Customize › Hide weekends. In Day the button is dimmed (Day always shows the date you are on), but its blue state still tells you what Next and Previous will do there: they step past a hidden weekend, so the arrow after Friday lands on Monday.

Day: tasks below the day, or beside it

In Day, Customize › Day view › Where your tasks go in Day view offers two layouts. Below the day is the default: the day's meetings and tasks run down one column. Beside the day puts your task list to the right of the day, so today's meetings and your tasks sit on one screen. In full screen, Customize is in the bar beside Actions.

Your Day layout, the width of the task list beside the day, the task list's scope, the side panel and the zoom are all remembered from one visit to the next, on any computer you sign in on. Each layout is remembered separately for narrow and wide windows. A window under 1280 pixels wide is narrow, and a wider one is wide. The hint beside each choice says which kind of window it is saved for, so a choice in one never changes the other. A window dragged across 1280 pixels changes layout once, at that point. Beside the day needs a window at least 760 pixels wide: narrower, that one choice is dimmed with Needs a wider window (Below the day stays available), the day is shown below with a line saying so, and your choice is kept for when the window is wide enough.

How much of each task to show in Day view (in Customize › Day view) chooses Comfortable (the full card) or Compact (one line per task). Tasks beside the day start Compact and tasks below it start Comfortable; each layout remembers its own choice, the row is tagged Tasks beside or Tasks below to say which one you are changing, and nothing changes until you press it. Your List's density is not changed by it: when you go back to the List, your own density is as you left it. The By board and person panel is not drawn in this layout. Utilities is off in this layout and in full screen, because the rail is not drawn there. In Customize > Utilities, Show the Utilities panel is disabled, with the reason Off with tasks beside or Off in full screen. Leaving the layout brings the rail back as you had it. The No date card lives in the rail, so in this layout open All to see work with no date, and give it a date from its row.

The By board and person panel

Beside the day in Tasks below, the panel lists the day's tasks by board or topic and by person. Press the › arrow at its top right, labeled Hide the By board and person panel, to fold it away, and the day then has the full width. Closing also clears any row you had chosen in the panel, so no task stays hidden without a reason. The tab on the right edge, labeled Show the By board and person panel, opens it again. In a window 1023 pixels wide or narrower the panel sits under the day and is always in view: the hide arrow is not drawn there, and a choice you made on a wider window is kept and comes back when the window is wide again. The same state is Show the By board and person panel in Customize › Day view, and it is remembered. The panel is not drawn when Tasks beside is on.

The card and the day header

Each task on the grid is a card. Read left to right it shows its status along the left edge, a check to complete or reopen it, the title (up to two lines), the owner's avatar, the board or topic it belongs to with a colored dot, and the lane it is in. Markers follow: ↻ for a repeating task, 💬 with a count for comments (blue when you have not read them yet), and a Late chip with the number of days when work has been carried over. Your own unassigned tasks show no avatar, because “You” on every card is noise.

Click a card to open the task in the drawer. Double-click it, or press Shift+Enter, to open the full task editor. The drawer always opens over the left of the calendar, in Month, Week and Day alike, so the calendar keeps its full width (on the List the drawer stays docked beside the list). Drag the handle on its right edge, or focus it and press the arrow keys, to resize it; Home or a double-click goes back to the default. It is the same width as the task details panel on the List, and Details panel width in Customize sets both. Cards have no hover buttons: to re-date a task, drag it to another day, or open its menu (right-click, . or Shift+F10), which offers To tomorrow, To next Monday and Pick a date…. A task that lives on a team board also offers Open on the team board. A screen reader announces each card's menu as Move or open “title”. A card marked View only is a task you can read but not change, so it cannot be dragged or re-dated.

Tasks with no date wait in the No date card in the Utilities rail, and when a week is empty the grid offers Plan from No date with the count. Drag one onto a day, or open it and set a date.

A task you can only view has no drag handle and cannot be moved.

Every day has a header with its date, its open and done counts (late work in red), and a thin meter that fills as the day's work is done. The counts are the same figures the grid draws, so a heavy week stands out down the page.

Done tasks fold away. Each day ends with ✓ N done; press it to show that day's finished work, and the choice is remembered for this view. The count stays in the day's header either way. Late work is listed first, then open work in your list's order.

Week draws every task as one line, at every Task size, which still sets how big each line is. Your meetings keep their own look, and a day's +N more opens that day with its tasks as cards. Month always draws lines, and Day has its own How much of each task to show in Day view.

The Tasks row in Week

Above the hours, Week has a Tasks row. It has three states, and you change them on the row itself, with no trip to Customize:

Select the arrow beside Tasks to collapse the row, and again to bring it back to the way you left it (compact or expanded). Show all and Show fewer switch between compact and expanded; Show all appears only when a day has more tasks than compact shows. Each window remembers its own choice, through a reload and a trip to another page, and another window you have open is not changed by it; a new window starts from the last choice you saved. Customize › Week view › Tasks row in Week view sets the same thing. There is no row in the List layout or in a window 900 pixels wide or less, where every task is drawn as a line already. The all-day section's fold above it is remembered per window the same way.

Full screen

The last control in the Calendar's bar is a pair of diagonal arrows. Full screen calendar (arrows pointing out) makes the bar and the grid fill the window, so a week or a month shows larger and every control stays in reach. The same button, now arrows pointing in and named Exit full screen, puts the page back as it was: the same view, date, filters and place in the grid.

Only the bar and the grid go full screen. The header, tabs and filters are covered, and Tab cannot reach them until you leave. In Day with Beside the day, the task list beside the day goes full screen with them. The rail is off in full screen, so Utilities is disabled there. Month, Week and Day all work, and so do Show every meeting, Show free time and the other options. Because the page's own buttons are covered, the bar carries Customize and Actions (the page's menu, called Actions here as everywhere) just before the exit arrows, so every option stays in reach. Meeting details, the +N more list, the Add to day and Block dialogs and the full task editor open on top of the calendar.

A task you open slides in from the left, below the bar, over the grid, so Month | Week | Day and the stepping stay usable. Escape closes one thing each press, innermost first: a dialog, then a meeting or day list, then the task, then full screen itself. Focus goes to the control when you expand and returns to it when you leave.

Full screen is remembered for this sign-in only: a refresh keeps it, but leaving the Calendar for the List, or signing out, ends it, and the next visit starts in the normal layout. There is no keyboard shortcut and no change on the phone page, which has no calendar.

Calendar and task sizes

On a large or second screen, make the Calendar's text larger and its rows taller. Open Customize and the section named for your view (Day view, Week view or Month view). There are up to two size sliders, and they are there only while the Calendar is showing: drag a slider or press the arrow keys. In full screen, Customize is in the bar. The Calendar follows as you move a slider. There is no separate zoom pop-up; each slider is a row in the panel, like every other option.

All three use the same five levels, Default, Roomy, Detailed, Large and Full detail, and the same level is the same size everywhere. Set Calendar size and Task size to the same level and a task and a meeting are drawn at the same text size. At Default all three match. Times, dates and counts follow your application font, like the rest of the text. Each level keeps what the level before it shows and adds to it:

A detail a meeting does not carry is left out. At Detailed and above, a Month cell lists its meetings by time and title, up to a count that grows with the level, then a count of the rest that opens the day. Reset section, at the foot of the view's section, returns the sizes to Default along with that section's other options.

Each size is tagged This window size: it is saved to your account, once for narrow windows (under 1280 pixels) and once for wide ones, so a laptop and a large monitor can each keep the level that suits them. It is still there when you sign in again, on any computer. Each Tasks window also keeps its own level until you sign out; see Each window keeps its own layout.

The summary strip

The Tasks summary strip above the list is shared with the Calendar, and while the Calendar is showing its date tiles move the grid. Due today and Overdue take you to Day view on today, where late work has its own section, and Due this week takes you to Week view on today's week. The other tiles filter the set the grid draws, exactly as on the List.

Work with no date has its own card

Work with no due date is invisible to a grid that only draws days, so it collects instead in the No date card in the rail, in Utilities. Give a task a due date, by dragging it onto a day or in its own editor, and it moves onto the grid and out of this card on its own. The card can be hidden in Customize Utilities. Its ⋯ menu holds Add a task with no date, and folding and resizing work as on any rail card.

Moving work to another day

Drag any task card onto a different day — a column in Week view, a cell in Month view — to change its due date. Drop it on the same day it is already due and nothing happens.

A completed task is dated the day it was done, so it appears on the calendar on that day. Reopening it restores the date it had before.

Dragging needs a pointer. From the keyboard, open a card's menu with . or Shift+F10 and choose To tomorrow, To next Monday or Pick a date…. While you drag, the card dims with a dashed outline and the day you are over shows a Drop to move to slot. In Week's Timeline that label floats in the day's column just above the pointer, so it stays in sight however far you have scrolled. Drop a card on a green free slot instead and it blocks time for the task without moving it (see Block time for a task).

Everything a drag can do, a keystroke can too. Select a task card and press Shift+→ or Shift+← to nudge its due date a day at a time, or Shift+↑ or Shift+↓ to move it a week. Focus follows the task if it is still on screen, or lands on the grid if the move carries it off view. If a move does not save, the card goes back where it was and a notice says why.

Keyboard on the grid

The grid is one tab stop. Arrow keys move between cards in a day and between days, so Tab goes from the grid to the next control rather than through every card.

KeyWhat it does on a card
EnterOpens the task in the drawer.
Shift+EnterOpens the full task editor (as does a double-click).
SpaceCompletes the task, or reopens it.
Shift+← / Shift+→Moves the task a day earlier or later. With the weekend hidden, Shift+→ on a Friday task moves it to Monday and Shift+← on a Monday task moves it to Friday.
Shift+↑ / Shift+↓Moves the task a week earlier or later.
↑ ↓ ← →Moves focus between cards and days.
. or Shift+F10Opens the ⋯ menu.

Adding a task

Double-click any day in Month or Week view, or press the + Add row at the bottom of a Week-view column, to open a small composer already dated for the day you clicked. Leave the date field empty and the new task goes straight into the No date card instead of onto the grid. Add another keeps the composer open and clears the title field, for adding several at once; Enter saves and closes it.

Cards and Lines, per page

The Calendar's Week view always draws each task as one line, with Task size setting how big each line is, and its Tasks row can be collapsed or expanded (see The Tasks row in Week). Month is always one line and Day has its own How much of each task to show in Day view, described above. The List and Notes keep their own density, and the team board is always compact.

Outlook meetings

The Calendar can draw your Outlook meetings beside your tasks. They are not tasks, and they are never counted as tasks. STRIDE only reads them. It never writes to your Outlook calendar. The setup is in Show your Outlook calendar beside your tasks.

Your meetings show on every Calendar tab: My tasks, Watching, On team boards and Completed. Only the tasks drawn follow the tab you chose. The Calendar's bar reads + Outlook · Connect until you connect. Press it, or Connect Outlook… in Customize › Outlook, to open My Settings → Calendar → Outlook calendar, where the setup steps are. Once you are connected it becomes the Outlook button, with a small status dot (green when the copy is fresh, amber when it is stale, red when Outlook needs attention, gray when offline, pulsing while it refreshes). Press Outlook to show or hide your meetings; press the ▾ (Outlook options) beside it for the status, Refresh now and Calendar settings…. The same choices are also in Customize › Outlook (the status, Show Outlook meetings, Refresh now and Manage in Settings…), so either door does the same thing. No banner or card appears either way.

Meeting times use the 12-hour clock: 9am, 8–9am, 9am–2pm on a card or row, and 9:00 – 10:00 AM in the meeting's details. While your first Outlook read is still on its way the bar says Loading Outlook meetings…, so an empty week is never mistaken for no meetings. When you arrive, and until your tasks are in, a Loading your calendar… status sits over the grid; it clears as soon as they are here, and if something could not be loaded the usual error message says so instead. While the Calendar fetches completed tasks for days you paged to that it has no data for, the grid dims and the bar names what is loading; both clear when it finishes or fails. Checks over work that is already showing, such as comment counts, do not dim anything: the bar says Updating… and the grid stays usable. When you press Refresh (the ↻ button at the top, or Refresh now in the Outlook menu) STRIDE asks Outlook for your calendar again: the bar says Refreshing Outlook… while it waits and Outlook updated 9:31 AM when the answer is in, and any meeting that changed is redrawn. If Outlook could not be reached the bar says so instead, with a button to try again. Outlook itself can take a while to publish a change you just made there, so a meeting added a moment ago may only appear on a later refresh. The Calendar redraws only the days that changed, so it stays still while it checks.

Nothing waits forever. If Outlook does not answer in time, the bar says so, for example Couldn’t reach Outlook. Showing your events from 9:05 AM., with a Retry button, and the Outlook button stays on the bar, so you can always see the status and open its menu. The Refresh button at the top of the page also refreshes your Outlook meetings while the Calendar is showing, the same as Refresh now in the Outlook menu.

Show every meeting (Customize › Outlook) applies to Week when it draws the List layout, while your Outlook meetings are shown (connected, and Show Outlook meetings on). A Week List column shows four meetings and then +N more meetings; turn Show every meeting on and every meeting shows, and the column grows to fit. The Timeline layout always shows every meeting, overlaps side by side, so while Week draws the Timeline the switch is dimmed with Timeline shows every meeting. While Free time is on every meeting shows anyway, so the row reads On while free time is showing and is dimmed, and with meetings hidden it reads Needs Outlook meetings showing. Day and Month do not offer it. A dimmed switch keeps its setting for when it applies again, and the choice is saved to your account, so it stays on across sessions and devices.

The search box at the top of the page searches your calendar as well as your tasks. Choose the second button beside it, which reads Calendar while the Calendar is showing (and Tasks on the List), then type. Global still looks across tasks, notes, people, teams and objectives, and does not search meetings.

A meeting matches when its title contains your text, in any capitals; its location, organizer and notes are not searched. Tasks match as they do on the List. It works in Month, Week and Day, in the Timeline and the List layout. While you search, only the matching meetings and tasks stay on the grid, and the all-day row, the clash marks and the day counts count only what is still showing, so two meetings that clash only through one your search hid are not marked. In Month each matching meeting is listed in its day with its time and title (at least three a day (more at the largest size), then N more events), even when Month would otherwise show only a count; on a phone the day shows the count, and tapping it lists the meetings.

A line under the bar says what matched, for example 3 meetings and 2 tasks match. When a match lies outside the days on screen, a button on that line takes you to it: 4 more matches outside this week · Next: Thu, Nov 12 →. It goes to the next match after the days on screen, or to the latest earlier one (Previous) when nothing is ahead, and stays in the view you are on. If nothing matches the line says No meetings or tasks match in this week.; with Outlook not connected or hidden it speaks of tasks only, and while your Outlook meetings are still loading it says so rather than claiming there are none.

Free time and the Free 45 min break markers are not drawn while a search is typed, so a gap between matching meetings is never mistaken for open time. A pending time hold or a meeting you have sent but Outlook has not yet shown follows the same title test, so a hold never stands in for a meeting your search hid. Your Show free time choice is not changed. Clear the box and the whole calendar comes back at once.

See double bookings

On Day and Week, your Outlook meetings sit on an hour-by-hour Timeline, as in Outlook. When two meetings overlap they stand side by side in columns, so three at once are three columns. A meeting that ends at 9:30 and one that starts at 9:30 are back to back, never overlapping.

Timeline or List. The calendar bar has a Timeline | List switch for Day and for Week; each view keeps its own choice. List is one row per meeting, with a 2×/3× badge on each clashing row and the summary too. In Customize the same choice is Layout, and Show double bookings (under Outlook) turns the dot, shading and counts off for your account without moving any meeting. Today returns the Timeline to the current hour.

Narrow windows. Week between 641 and 899 pixels wide shows List, and at 640 and under Week is a strip of days with their conflict counts and the day you pick drawn as a Day Timeline. Show every meeting applies to List only; while Week draws the Timeline it is dimmed with Timeline shows every meeting. Search still looks at every meeting. Free time never changes the layout.

Focus time, lunch and flights

On Week and Day, your Outlook meetings that are really focus time or lunch stand out from ordinary meetings. A marked row keeps its title and time, gets an outline in its color on all four sides, a light wash of the same color, and a small icon chip in place of the calendar mark: a headphones chip on a green row for focus time, a fork and knife chip on an orange row for lunch, and a plane chip on a purple row for a flight. A free-time slot is labeled Free and has no outline or icon. A screen reader hears Focus time, Lunch or Flight before the meeting's name.

What is marked. Focus time: a meeting titled Focus time, Focus block, Deep work, Heads down and similar, including the ones Viva or Outlook add for you, any meeting with the word Block or Blocked in its title (Blocked - travel, time block; not Blocker review or Roadblock sync), so blocked time looks like the free time you block, and a focus block you accepted from STRIDE, even if you renamed it, as long as it is the only meeting at exactly that time (a meeting booked over the block is not marked). A leading first name of yours, Brian's or My is ignored, so My focus time counts; another person's Customer's focus does not. Lunch: a meeting titled Lunch, Lunch break, Team lunch or Lunch with a person, such as Lunch with Sam or Lunch w/ Sam, that starts between 10:30am and 3:00pm (3:00pm included) and lasts 15 minutes to 2 hours. Lunch and learn, brown bag, working lunch and lunch meeting are meetings, so they are not marked. Canceled and all-day events are never marked. A marked meeting that has ended recedes like any past meeting: the panel's own background, faint type, a dotted edge and an unfilled chip, with no color, and a screen reader adds ended.

What counts as a flight. STRIDE reads only the meeting's title (and, for one case, its location), so a flight is recognized when the title looks like one, in one of these forms. Airport and airline codes must be in capitals and airline names capitalized, so ua or delta in a sentence is never read as an airline.

Words such as review, plan, sync, training, simulator and crew anywhere in the title keep it from being a flight, except after a Depart flight number as above (Flight review, Pre-flight checklist, Flight crew sync), and so do Department sync, Delta planning and United Way volunteer day. An all-day Trip to Baltimore and a canceled flight are never marked. A meeting titled Blocked - flight to BWI is a flight, and Blocked - travel is blocked time, drawn like focus time; a copy of a block you sent from STRIDE itself stays focus time whatever its title says. If one of your flights is not marked, tell us its title: it becomes a rule, so every later flight with that title format is marked, and there is no per-meeting switch.

A flight always counts as busy. Even when Outlook shows a flight as Free, free time is never offered over it, a gap beside it is measured from it, and a meeting booked during it is a double booking. This holds whether or not the marks are on.

Month does not change. Month draws its meetings as it always did. To turn the marks off on Week and Day, use Customize › Outlook › Highlight focus time, lunch and flights, which covers all three marks. It is on by default and saved to your account. Until Outlook is connected the row is dimmed with the reason Connect Outlook first. If your calendar feed only shares availability, meetings arrive as Busy with no title, so nothing can be marked. The phone's Calendar tab marks lunch and flights, with the same fork-and-knife and plane chips and the same orange and purple edges, and follows the same switch; it does not mark focus time and does not show free-time blocks. See STRIDE Mobile.

Where you are in today

On Week and Day, today's Outlook meetings carry a red line with the time (for example 2:47pm). It is red, not the blue of the rest of the calendar, so it is easier to find at a glance. The time sits in a solid red tag in the hour column: Day shows it with am or pm, and Week shows just the time so it fits. The part of today that has already gone is shaded a little darker, so the line is the edge between what is past and what is left. When the calendar first appears, or you move to another week or day, the dot gives one short ring. It does not repeat, and it is turned off if your system asks for less motion. When no meeting is happening it sits between the meetings that have finished and the ones still to come. A meeting that has ended is drawn past, as described below, and a screen reader hears ended. All-day events stay above the line and are never marked past today.

Past meetings look past. A meeting that has ended is drawn receded, on today and on any earlier day: the panel's own background, faint type with a title at normal weight, a thin dotted edge, and a small clock in place of the calendar mark. The clock shows at every window width, including a narrow monitor, so a meeting that is over is easy to tell from one still to come. A meeting you sent that is still awaiting a reply keeps its Pending word once it is over, but loses its stripes and its blue edge turns gray. On the grid its location, Join badge, organizer and notes are hidden, so the time and title stand out. A canceled meeting that has also ended keeps its strikethrough. It still opens, and its card says Ended beside the time. A meeting under way and one still to come keep their full strength, so the ones ahead look live. Today's meetings change at the minute without a redraw, as the line does. On Month, the meetings a past day lists are dimmed too.

When a meeting is happening now, the line is drawn inside that meeting, as far down it as the meeting has gone. On the List layout the meeting's left edge fills blue to the same point and the top of the meeting gets a light blue wash, so a four-hour meeting at its halfway point shows the line halfway down. The time sits on the line (for example 11:45am · 1h 30m left), or, on a tall Week card, on a short line at the bottom of the card. Day always shows the time on the line, at every zoom level. If two meetings overlap, the one that started last carries the line and the other still shows how far through it is. On the timeline layout the meeting's own time and title are drawn on top of the line, so the words stay readable while the line runs behind them; the dot sits in the hour column beside the time. A screen reader hears in progress, 62% through, 1 hour 30 minutes left after the name, or ended.

The line moves by itself once a minute and catches up when you come back to the tab. Nothing redraws, so an open meeting or your place on the page stays put. There is no line on Month, on any day but today, or when today has no timed meetings. When a Week column shows only some of the day's meetings (4, 5, 6 or 8, depending on the zoom level) and then +N more meetings, the line sits just above that button when no meeting is happening and the time is past the visible ones, and also when the meeting happening now is hidden behind it; open it and the line is inside the meeting. With free time on, the line stays at the time among the meetings and free blocks. There is nothing to turn on.

Meeting reminders

With your Outlook calendar connected, STRIDE reminds you about your meetings. It is on by default, so you do not have to set anything up. A card appears 5 minutes before a meeting starts, and a second one, Starting now, appears when it starts, with a Join button when the meeting has a Teams, Zoom, Webex or Google Meet link (a Google Meet link in the location or the notes of a Google Calendar invite counts, with or without https://; a dial-in number alone does not, and neither does a link that only goes to a service’s home page: it has to be the link of an actual meeting). It is the same card you get when you click a meeting on the Calendar — its time, place, people and notes — so there is only one way a meeting looks. Reminders come from your own Outlook calendar and are read-only, like everything STRIDE shows from Outlook.

Turning them off, or changing how early

Open My Settings → Calendar → Outlook calendar, or press Reminder settings on a meeting card. Meeting reminders is a card of its own on the Calendar tab, below the connection. Its rows need a connection: until Outlook is connected the card says Meeting reminders start once your Outlook calendar is connected. The connection card above has the Connect Outlook button. Once connected, three rows are there, saved to your account so they follow you to every device:

The first two rows are also in Customize › Outlook on the Calendar, and change the same setting. With Outlook not connected they say Connect Outlook first.

Free time and blocks

Free time is drawn inside the Week or Day you are on. There is no separate free-time grid and nothing else moves: your meetings, tasks, counts and the Day layout stay where they are, and your open hours, from 8am to 6pm, appear as green blocks in the gaps between your meetings, under a small head such as Free 10am–12pm · 2 h (Week: Free 2 h). Turn it on with the Free time button in the bar, Actions › View › Show free time (a check when it is on), or the Show your free time row in Customize: all three are one switch. It is one switch for both views. It is remembered, and it is off by default, so the ordinary calendar stays the default. Free time is not offered in Month. The free time is worked out in your browser from your Outlook meetings, and nothing about it is sent anywhere.

Length of each free-time slot in Customize › Free time (60 min or 30 min) sets the slot size. It is 60 min by default, and your choice is remembered. It is dimmed until free time is on. Changing the size clears your selection, because the slots no longer line up. While free time is on, Show every meeting is dimmed because every meeting already shows.

An open gap of 30 minutes or more that no whole slot covers is offered as a short slot of its exact length, such as 10:00–10:30am, labeled with its real times. You select and block it like any other slot, so the bar never says there is no open time while a break shows. Whole 30- or 60-minute slots stay where they fit.

All-day events

Free time and breaks ignore all-day events, so the open slots in a day are the hours your timed meetings leave open. Three kinds of all-day event still take the whole day: one that is Out of office, one that is PTO (or says so in its title, such as PTO, OOO, Vacation or Time off), and a Holiday. A holiday for Canada or India does not take the day. A holiday is one from a holiday calendar or titled Holiday; an event whose location is only a country counts as one only when it shows as free, so a conference abroad does not take the day. The word has to start or end the title, so Paul’s PTO planning is not time off. A title counts as your time off only when it has your first name in it, such as Brian PTO: a teammate’s Sam PTO on a shared calendar leaves your day free. An event marked Out of office in Outlook always takes the day.

All-day events sit in their own section above the meetings in Day, Week and Month. The section has a darker background and a rule under it, and its header shows a chevron, All day and the count. Click the header, or press Enter or Space on it, to fold or open it. Folded, the header still shows the count and the reasons, such as All day 4 · Holiday · PTO. On a past day the folded summary is shown faint, not amber, and a summary that is cut off shows its full text on hover. One fold covers the whole week in Week (all seven days) or the whole month in Month. In Week it starts folded and your choice is kept for your account: open it once and it stays open on every week and the next time you sign in, until you fold it again. In Day and Month it starts open, it is not saved, and it resets when you go to another day or month. An event that takes your day off shows its reason in amber. In a narrow Week column or a Month cell the word moves into the tooltip and the event's mark fills amber instead. A day with none, in a week or month that has some, keeps an empty space of the same height.

In Week every day's section is the same height, so the meetings line up across the week. In Month the space for all-day events is set for each week row, not for the whole month: the cells in a week line up with each other, and a week with none keeps its own space. A cell shows 1 all-day event (2 at the larger calendar sizes, 3 at the largest), then +N all day, which opens the day. Closing the day's popover returns focus to the +N all day button. On a phone-width Week (the day strip) and in Day, the section lists every all-day event. All-day events never count toward the four meetings a Week List column shows, so they never hide a meeting. +N more meetings and Month's ▦ N events count meetings only. The arrow keys walk the day header, the All day header, the all-day events, then the meetings. A folded section is one stop: the arrow keys skip the rows hidden inside it, so Down from the All day header goes to the first meeting.

Past time is not drawn

With free time on, open time that is already over is not drawn: a day that has passed shows no blocks, and today shows only the slot under way and what is still ahead. Past time was never selectable. Saturday and Sunday show no blocks either, and a day your Outlook marks out of office, PTO or a holiday says No free time · All day with the reason.

Breaks between meetings

In Day and Week, a quiet line such as Free 45 min, Free 1 h or Free 1 h 30 min sits in each gap between your Outlook meetings that is at least as long as you chose, between 8am and 6pm. Show breaks between meetings in Customize › Free time offers Off, 30 min or longer (the default) and 60 min or longer, saved to your account. It is on by default, so you will see the markers as soon as your Outlook meetings are connected. No gap shorter than the minimum you chose is marked.

A free block is open time you can block; a selected one shows a ✓. A tentative, out-of-office or working-elsewhere meeting counts as busy and a timed meeting is what takes a slot; an all-day event takes the day only when it is out of office, PTO or a holiday (see All-day events). Free and canceled meetings do not take any time. A block you have sent is drawn in place as Pending: accept it in Outlook (striped) until Outlook shows it, and then as an ordinary meeting. Pending blocks show whether or not free time is on. Without Outlook connected, Day shows one faint line under the bar telling you to connect Outlook in Settings.

Free time is only drawn when your Outlook calendar has been read. While it is still loading, when it could not be read, when it has not refreshed for over a week, or for days outside the range STRIDE reads (about a month back to 92 days ahead), the view shows one line saying why instead of the blocks, and nothing can be selected or blocked. That way an empty feed is never mistaken for an empty calendar.

Select a block by clicking it, or by pressing Enter or Space on it, and press again to clear it. Arrow keys move through the day's meetings and blocks. Selected blocks stay selected while you page and when you switch between Day and Week. For many at once:

In Day, ‹ and › page through the days, one at a time, and each shows its own date. They are labeled Previous day and Next day for a screen reader, and a weekend is paged to like any other day. Each day keeps its own meetings and sent blocks while you page.

The selection bar sits at the bottom of the grid whenever free time is on. It reads N free slots this week. Click a slot to select it., then N slots selected when they are all on one day or N slots across D days selected, with Select all free times, Deselect and Block N slots…. The title of every block you send is set in the dialog; it starts as Focus Time and can be up to 80 characters.

Block N slots… opens a dialog that lists the blocks by day, with adjacent slots joined into one block. It names the address the invites go to: your own verified address, either your sign-in address or your verified alternate. With no verified alternate, that choice reads Your verified alternate (none verified) and cannot be picked. STRIDE remembers the address you last sent to and offers it first next time, from one session to the next; a choice that fails to send is not remembered. Press Send N invites, and every block goes out in one send, with one calendar invite per block; the button reads Sending… until the send finishes. If a send cannot go, the dialog gives the reason and nothing is marked pending.

Accept each invite in Outlook

STRIDE emails you the invites. Open each one in Outlook and accept it. Until you accept it, the slot stays Pending. After you accept, Outlook can take up to about an hour to publish the change. The next refresh of the feed then turns the slot Blocked. STRIDE matches each block by its start, end and the title that was sent.

Undo in the toast after a send sends a cancellation for every block in that send, and the slots become open again. Undo is only in that toast: once it has gone, remove a block by declining or deleting the invite in Outlook.

A send carries at most 40 blocks, which is a full week of joined blocks. You can send at most 80 blocks in any 24 hours. Past either limit, STRIDE says so and sends nothing. A block can only be made for an open slot from today onward, within the next 92 days.

What the invite contains

Each invite holds only the block's start and end times, the title you chose, and the line “Held with STRIDE.” It never holds a meeting's title, attendees, notes or location. STRIDE never writes to your Outlook calendar and never sends meeting details. The calendar changes only when you accept an invite.

Block time for a task

To hold time for a task, drag the task onto a green free slot in Week or Day. Any open task card works: the Tasks row in Week, a Week column, the tasks below the day, a day's +N more list, the No date card, and the task list beside the day. Over a free slot the slot turns blue and says what will happen, such as Block 2pm–3pm for “Draft Q3 summary” (a long name is cut there; hover for all of it). Anywhere else in the day it still says Drop to move to that day, and a drop there moves the due date as before, so you can always see which one you are about to do.

Letting go opens the same Block this time on your Outlook calendar dialog, for that one slot. Nothing is sent yet.

The task does not change: its due date, status and everything else stay as they are, whether you send or cancel. Slots you had selected stay selected, and the next Block N slots… keeps its own title (Focus Time, or the one you last typed there), never a task's name.

From the keyboard or a touch screen, open the task's menu (right-click, . or Shift+F10 on a calendar card, or the ⋯ button on a row of the task list beside the day) and choose Block time…. Every free slot gets a dashed green edge, the bar reads Pick a free slot for “…” with a Cancel button, and focus moves to a free slot on the task's day when it is on screen. Use the arrow keys and press Enter (or click or tap a slot) to open the same dialog. A press while picking does not select the slot. Escape or Cancel stops picking and puts you back on the task. You can page to another week or day while picking; switching to Month, another tab or the List, or turning free time off, stops it. With no free slot on screen, the bar says No free slot this week. Page to another week, or Cancel.

When free time is off, dragging a task over a day adds a second line under the move label, Turn on Free time to block a slot, and Block time… turns free time on for you (a notice says Free time is on.; the Free time button turns it off again). Block time… is not offered for a done task, a task you can only view, in Month, while a search is typed, or without Outlook connected. It is not on the phone.

Share my availability

Share my availability lists your open time over a range of days and drafts an email in Outlook on the web with those times, so you can arrange a meeting with someone. STRIDE finds the times in your Outlook calendar and drafts the email. STRIDE sends nothing. You add who it is for and send it from Outlook. It is not on the phone, and no AI is involved.

It opens from two places. On Tasks, in List or Calendar, choose Actions › Create › Share my availability…. In Calendar, with Show free time on, select one or more free slots and press Share…, beside Block N slots…. That opens the dialog on Your selection, with exactly those slots. Share… is dimmed while free time cannot be read, as Block is. The dialog needs your Outlook calendar connected to offer any time.

Range is This week, Next week, Next 2 weeks (today and the 13 days after it) or Custom. Custom has a From and a To date, from today on, and covers at most 28 days. Only weekdays are offered. The dialog opens on This week, or on Next week when no working time is left this week (Saturday, Sunday, or Friday after 6pm). The range is not remembered. The To date under Custom is the end of the range, not the To line of the email, which stays blank.

Slot length is 30 min or 60 min, and it is the same setting free time uses. Changing it here changes it on your calendar too, as the note under it says. It is not offered on Your selection, whose slots are already cut.

Times lists exactly the green free-time blocks for the range at your slot length. The rule is free time's own: 8am to 6pm on weekdays, minus meetings that are busy (a tentative meeting counts as busy), minus slots held by a pending or blocked STRIDE block, and minus a slot already under way today. Adjacent slots are joined, so two half-hour slots show as one time. An open gap of 30 minutes or more that no whole slot covers is offered at its exact length, such as 10:00–10:45am. The times are grouped by day, with a box for each day and one for each time. Everything starts ticked. Untick a time or a whole day. The line above the box counts what is ticked, such as 8 times across 4 days.

A day with no open time is left out of the list. A line under the box names it, with the reason when Outlook marks the day out of office, PTO or a holiday, as in No open time: Wed, Nov 11 (all day, Out of office). A day past the range STRIDE reads from your calendar is named under Not in your calendar feed yet.

The email has a Subject, which starts as Finding a time to meet, and a Message. The message is the short intro above the times. The standard one is a greeting and a line asking the other person to choose. Edit it as you like: your edits are remembered, and Reset beside the label puts the standard text back. Under the message each day is one line, such as Tue, Nov 10: 10:00–11:30am, 2:00–3:00pm, then a time zone line, such as All times are Eastern Time (EST)., then Thanks,. Nothing else goes in: no meeting title, location, attendee or count.

Add my signature is off by default. Turn it on and the email ends with your saved signature. With none saved, the switch reads Add my name and the email ends with your name. Your choice is remembered. Outlook may add its own signature too; the note under the switch says how to stop that.

The Preview shows the exact text Outlook will receive. If the times are in a different time zone from your STRIDE clock, a faint line under the preview says so.

Too many times. An Outlook link has a length limit. If the ticked times would make it too long, Open draft in Outlook is dimmed and the status line says Too many times for one Outlook link. Untick some, or use Copy text and paste it into Outlook. STRIDE never trims the list to fit, because a trimmed list would quietly withdraw times. Copy text still works, and the status line tells you it copied (or that the copy was refused) after that message.

When there is nothing to offer, the Times box says why:

Meetings with people in your organization

A meeting you make in STRIDE always finishes in Outlook. You set the title, date, start, duration, people, location and agenda here and press Finish in Outlook; Outlook opens the meeting and you send it from there, so you can add a Zoom or Teams link first. STRIDE sends no invite for a new meeting. A meeting runs from 15 minutes to 10 hours, and its start must still be in the future. Blocking time on your own calendar is separate and works as described above, and a meeting STRIDE sent earlier can still be edited, resent and canceled (see Your own meetings).

Meetings with people are switched on for everyone. A God Mode holder can switch them off again; while they are off, none of the meeting buttons below appear (not New meeting…, not the day's + Meeting, not Schedule meeting…), and the calendar still blocks time on your own calendar, as described above. When they are switched back on, the buttons appear without a reload.

Starting a meeting

Start one from any of these:

Find a time

The meeting dialog has a Find a time section under Date, Start and Length, so you can see your own open times without leaving STRIDE. It is open when you start a meeting from a task or from Actions › Create › New meeting…, and folded when the Calendar already chose a time for you and no task is involved (a free-time selection, or + Meeting on a future day, which starts at 9:00); a meeting that starts from a task always opens it, including from a task card on a future day (the card fills in 9:00 and lists that day’s open times, and picking one replaces the 9:00); press its name to open or fold it, and while it is folded it says how many open times there are. It is part of a new meeting only, not Edit meeting.

The dialog on a team board’s task card has it too, and so does Schedule meeting… in a task’s details panel (see Scheduling a meeting about a task).

A Zoom or Teams meeting: Finish in Outlook

A Zoom link pasted ahead of time can stop working, and only the person who sends a meeting can add a link that everyone gets. So Finish in Outlook is the main button of the meeting dialog, beside Cancel, and there is no Send button. Outlook on the web opens a new meeting in a new tab, already filled in with the title, the time, the location if you typed one, and the agenda. A meeting made from a task also gets a link back to the task. Press Outlook's own Zoom or Teams button there, which makes a fresh link, and send the meeting from Outlook.

STRIDE sends nothing and saves nothing for this meeting. It is a normal Outlook meeting that you own, and it appears on the calendar here once Outlook updates your published calendar. The people you chose are filled in for you: the colleagues you picked and the people outside your organization whose addresses you typed. If STRIDE cannot fill someone in (for example they are no longer in your organization, or the connection fails), Outlook still opens, and the message afterwards names them (Finish your meeting in Outlook, and add … there.) so you can add them in Outlook. A very long agenda is shortened and ends with …(continued in STRIDE). The Location box points you to Outlook too: Room or address. Add Zoom or Teams in Outlook. If you started from selected free time, the selection clears once Outlook opens. The button is not on Edit meeting, because that meeting already exists.

Choosing people

The dialog's step is titled Choose people. It lists the people in your organizations who can be invited, and you search them with Search your organization by name. To invite someone outside your organization, type their full email address instead: the list offers + Add … (outside your organization), and the person is added with an External chip. A name never finds someone outside your organization. Each person you add appears under Selected (N), with a name you can remove. Press Done (N) to go back to the meeting, where the button reads Add or change people… (N). You are always included as the organizer, so with nobody selected the meeting is only yours.

Only verified members of your organizations can be invited, and anyone on one of an organization’s teams is a member of it. A colleague who has turned off Meeting invites from colleagues in Email preferences cannot be added, and does not appear in the list.

A new meeting has no limit on people in STRIDE, because Outlook sends it. STRIDE no longer sends meeting invites itself, so there is no invite limit to reach.

People outside your organization

A complete outside address you type goes straight into Outlook’s To: STRIDE does not check it or send to it. When you press Finish in Outlook it is saved to your own address book (switch that off there), so it is suggested next time you type it. STRIDE no longer emails meeting invites to people outside your organization, or to colleagues: Outlook sends the meeting. There is no switch for outside invites any more, and Organization settings no longer has one.

People outside your organization who received a STRIDE invite earlier can still unsubscribe from its link.

What people receive

A meeting you finish in Outlook goes out as Outlook’s own invite from you, with the Zoom or Teams link you added. A meeting STRIDE sent before it stopped sending invites went as an email from your name (via STRIDE). It has the meeting's title, time, place, agenda and people, a link to open STRIDE, and a calendar invite. Replying to the email reaches you, so a reply from a person you invited comes to you. The email tells them that you are in their organization and that you chose to invite them.

Your own meetings

STRIDE no longer sends meeting invites, so almost nobody has a meeting STRIDE sent. If you do, open it from the calendar to see its people. Its card on the grid shows Edit and Cancel meeting…. Edit meeting is a read-only view of the title, time, people, location and agenda, with Cancel meeting… and Close. From the meeting you can:

Edit meeting has no Send update and no Resend: STRIDE no longer sends or updates meeting invites. To change a meeting STRIDE sent earlier, change it in Outlook, or cancel it in STRIDE and set it up again with Finish in Outlook.

When a cancellation does not reach everyone

If a cancellation does not reach everyone, the dialog says Canceled, with a problem and names who did not get it. Tell that person yourself, or they can decline from Outlook.

STRIDE sends no email for a new meeting. The only meeting email it still sends is the cancellation of a meeting it sent earlier.

Linked meetings on a task

A meeting STRIDE sent earlier from a task is listed in the task, under the task's details, as Meeting · followed by its time and the people. Open on that row opens the meeting so you can edit or cancel it. A task can have several meetings, and the link only records which task each meeting was for. A meeting you finish in Outlook is not listed here, because STRIDE does not keep it; it appears on the Calendar once Outlook updates your published calendar.

Week Agenda

Actions › View › Week agenda… opens the week on screen — a brief for exactly the week the date range names. The same item is in the Actions menu on the List and in full screen. It is a written summary of your week: themes, priorities, what is closing out, what is moving to next week, and a few suggestions, built from the same tasks the grid already shows you.

Two different gates for two different things

Generating or regenerating a brief calls your AI assistant and needs a key configured in Settings — without one, the button is replaced by Set Up AI Assistant.

Opening and reading an already-generated brief needs no key at all. Once generated, a brief stays readable even if you later remove your key; only writing a new one needs the assistant.

The header shows when the agenda was generated, as an exact date and time plus how long ago. A chip reads N tasks changed since or ✓ Up to date; press it to list the changes, grouped as Added, Edited, Completed, Due date moved, Moved out of this week and Removed, with Regenerate with these changes and Keep this agenda. Checking costs nothing and regenerating is always your choice. A past week shows Past week and no chip; an agenda made before this was added can show N+, because removals are not counted for it.

Regenerate replaces the saved brief with a fresh one; a failed regeneration leaves the previous one untouched.

Regenerate runs on STRIDE's server, on your own AI key, so it finishes and saves even if you close the dialog or leave the page. Reopen it while it is working and it says Regenerating… started N min ago; once it is done you see the latest brief with Generated and the time. If it finishes while the page is open and the dialog is closed, a Week agenda is ready notice appears. A run that fails shows the error and keeps your previous brief; a run that never finishes shows The last regeneration didn't finish, with Regenerate to try again. There is no cancel — once started, it finishes and saves. That is the same with Claude or ChatGPT: both run on STRIDE's server, on your own key. The AI page lists the week-ahead brief as sent from STRIDE's server.

Building a brief sends only facts already on your calendar to the model — task titles, dates, tags, board names and counts — never a user id, email address or teammate's name. It uses the same per-user API key every AI feature does; see Your account to configure one.

The Utilities rail

The Utilities button toggles a column beside the grid, on by default. Folding it away leaves the full width of the page to the calendar grid itself; your choice is remembered. Open, its first card is the undated-work list described above, followed by a clock, a weather widget, a mini month view, and your quick links — each its own card, each foldable and resizable on its own, exactly like the undated-work card above them.

The clock

An analogue face and digital readout for your main time zone, plus a row of any other zones you have added in Settings → Time, weather & links. Press a zone in that row to make it the one the big clock shows. Folded, the card still shows your local time in its header.

Weather

A small card per configured location (up to three), each showing the current reading and a short forecast strip; press a card for its full forecast. Locations are managed from Settings → Time, weather & links. With none configured, the card offers a button straight to that settings pane; if the weather service cannot be reached, it offers a retry.

The mini month

A small month-by-month calendar inside the Utilities rail, independent of the grid's own Month/Week/Day view. Each day is bolded if you have work due on it; pressing a day opens a popover listing that day's tasks.

It shows the months you choose, and it never resizes

How many months it draws comes from Settings → The utility rail (one, two or three), and that is exactly how many you see. The card never scrolls and has no height grip, so dragging the rail taller does not add a month.

The same quick-links list as everywhere else it appears — your own personal links, plus any a team you belong to has published, in the order set in Settings.

Focus

Focus is the same suite-wide tag filter available on Tasks, Notes and the team board — narrowing everything on screen, calendar included, to one tag. Set it from the Focus control in the navigation strip; it narrows the tiles, the grid, the undated-work card and the mini month's bolded days together, so nothing disagrees with the grid underneath it.

What you will actually see

A handful of states are worth naming, because they are the ones a reader meets without necessarily building toward them: