Signing in
Signing in
One sign-in covers all of STRIDE — Tasks, the team board, OKRs and the admin console. Signing in once is enough; moving between them does not ask again.
Signing in
Go to the sign-in page, enter your email address and password, and press Sign In.
Remember me on this device fills in your email address next time (never the password) and keeps your session when you close the browser. Leave it unticked on a shared computer: the session ends with the tab and nothing is left behind.
Light or dark are two buttons in the top-right corner, labeled Dark theme and Light theme — the sign-in page has no team yet, so the third, team-colored option the app offers is not here. With no choice made it follows your device; whatever you pick is the same setting the apps use.
If your session expires while you are working, the app sends you here and returns you to the area you came from, not the exact card or note you had open.
The cursor starts in the right box — the email field, or the password field once the page already has your address. Show, beside the password box, reveals what you have typed; press it again to hide it.
Where are you going?
The sign-in card. The theme buttons are at the top right, beside Back to site; the STRIDE mark at the top left goes to the public website. Admin console sits on its own row under the three tiles because it is not an ordinary destination.
Creating an account
Anybody can create an account here — there is no code to obtain first, nobody to ask, no approval to wait for. Open Create account, fill the form in (email, password, first and last name — a checklist under the password field ticks off the strength your administrator requires as you type), and press Create account; the account exists immediately. Your name matters beyond the greeting: tasks are assigned to people by full name.
The last step is proving the email address is one you can actually read — a six-digit code emailed to the address you signed up with. Until you enter it, the account exists and reaches nothing, so sign up with an address you can open now.
If somebody invited you
An invitation is a message, not a credential. If a team invited you by email, the message carries a link that opens Create account with your address already filled in; there is no code in it and nothing expires. Use the address the invitation was sent to — people are matched to teams by email address, so registering with a different one leaves you off the team. The invitation comes from the team's own name and mark, not this product's, so search your inbox for the team.
The same card with Create Account chosen: two more fields, and a checklist that turns green as each rule is met — never red while you are still typing. The rules drawn here are an example — an administrator chooses how strong passwords must be, so yours may ask for more.
Verifying your email address
The moment the account exists, the page asks for a six-digit code emailed to the same address, and this is a gate, not a reminder you can put off: nothing else works until it is entered. Type it into Verification code and press the button underneath — there is no link to click, so it does not matter which device your mail is open on.
- A code lasts 60 minutes.
- Asking for a new one replaces the last — if two land in your inbox, the newest code in your inbox is the only one that works. (Asking twice within a minute is refused rather than sending twice.)
- Six wrong attempts lock that code, not your account; a new code starts you over with a fresh six.
- A wrong code, an expired code and one that has already been used read identically, on purpose, so a bad guess cannot be used to learn which it was.
Closing the page loses nothing — signing in again with the same email and password brings you straight back to this step. Until you finish this, you are invisible to any team that invited you, since an unverified address matches no invitation. If the mail does not arrive, check spam first, then confirm the address on screen; a wrong address cannot be corrected from here — ask your administrator.
The confirmation code after your password
After the password, the page asks you to confirm it is you with a six-digit code emailed to your sign-in address — the address you verified when you registered. If you chose to get your codes at both addresses, the same code also goes to your confirmed alternate email, and the card says so: We sent your code to your sign-in email and your alternate email, without showing the alternate itself. Either copy works (see where your verification codes go). If your account was verified through another email address when you created it, and your sign-in email is not confirmed yet, the card sends nothing until you choose. It offers Send a code to the address you signed up with first, then Send a code to my alternate email instead. Entering the code from the address you signed up with confirms that address. If you confirm it from the same browser you created the account in, without having signed out, and you are not signed in anywhere else, nothing is reset: your settings stay and the alternate becomes your backup address. Confirmed from another browser, or while another browser is signed in, it also removes the alternate, signs out every other browser, and resets what could have been set up by somebody else: your settings (including an AI key), your mobile number, connected calendars, email signatures and API tokens. Your tasks and notes are kept, and the next screen says how many there are, once, so you can check they are yours and check your name in Account; you then accept the terms yourself. That is how the owner of an address gets the account back if somebody else registered it: reset the password (the reset code goes only to the address you signed up with), sign in, and take this code. Type it into Code and press the button underneath. It works like the verification code above: it lasts 60 minutes, a new one replaces the last, and six wrong attempts lock that code, not your account. Twenty wrong codes in 24 hours pause codes for the account altogether: the card says to try again tomorrow and offers no Send button until then.
- A new computer or browser always asks. That is the point: a password used somewhere else is not enough.
- The same browser does not ask again when you sign in later — after signing out, after closing it, with or without Remember me — until 7 business days have passed (Monday to Friday, UTC, holidays not skipped; a God Mode holder can set it between 1 and 30). Then it asks once more.
- If your session is close to that point, the code is asked for when you open the app, not partway through saving something.
- Changing your password, or Sign out other browsers, makes every other browser ask again.
- There is no way to skip it. A God Mode holder can turn the step off for everybody if mail is down; it is not a per-person setting.
The code only ever arrives straight after you sign in. If an email asking for a code reaches you when you did not just sign in, do not use it and change your password. The phone view asks too, then returns you to it. If you registered just now, the verification code above counts as your confirmation, so you are asked once.
Joining or creating an Organization
Once your email address is verified, the sign-in page asks one more thing before it opens the app — but only if you are not already on an Organization or God Mode applies to your account. Being added to one of an Organization’s teams makes you a member of that Organization, so a person on its team is never asked. Leaving the team does not take you out of the Organization; Leave Organization does.
The Organization Token
The Create Account form carries an optional Organization Token field — a code an Organization sends when it invites you. A token is never a gate on registration: typing nothing, or typing a wrong one, never stops your account from being created. It is checked afterwards, once your address is verified; if it does not redeem, the page names the problem — “This Organization Token has expired” or “This Organization Token isn't valid for this email” (it belongs to an invitation sent to a different address) — and offers Remove token and continue (carries on as an ordinary account, invitation untouched) or Try another token, which opens a field for a replacement code and swaps the button for Try this token to submit it.
If an invitation is waiting for you
If an address you have just verified already has an invitation, the next screen (headed How would you like to use STRIDE?) names the Organization next to Review invitation, which shows Accept invitation and Decline. Neither is forced — Continue on my own or Create an Organization leave the invitation exactly as it was, and once you are signed in it still appears in your Message Center's Unread and All tabs with the same two choices, so skipping it here only postpones it. See comments, mentions and messages.
How would you like to use STRIDE?
Two tiles: Create an Organization (set up a workspace for your team) or Continue on my own — a fully supported, permanent way to use the product, not an unfinished step.
Creating an Organization
Pressing Create an Organization asks for an Organization name and a first team name (both required, named separately so they do not share one by accident — leaving the team name blank is refused with “Name your first team to continue”), an optional organization mark, and a review block showing your role — Organization Owner — before you press Create Organization. A pending invitation shows a warning first, but Continue creating Organization proceeds anyway, leaving it untouched. Once created, Go to STRIDE continues to choosing where you land; Configure Organization goes to the Team Board instead, where you can set up Teams, Boards and People. If the mark fails to save, the Organization is still created and fully valid — Retry mark or Continue without mark.
Choosing where you land
Under the sign-in form, Where are you going? offers three destinations as tiles — Tasks, Team Board and OKRs — and the Admin console on its own row underneath. Pick one and it is remembered on this browser. All three land on the pages this manual describes, one shell across Tasks, Notes, Calendar, Team and OKRs; the Admin console is its own surface with its own layout. Choosing Admin console only says where to go; it grants nothing — whether you can actually open it is decided after sign-in, by the database, and a non-administrator is turned away regardless of what was picked here. OKRs opens on your own team, preferring one with objectives switched on; change team from the dropdown once there.
Bookmark sign-in on a destination. A link under the form carries whichever destination is selected, so a bookmark of it always opens sign-in on that page.
If the code does not arrive
Creating an account on a work email address shows a short notice: your organization's email filter may need to allow email from notify.strideos.me, the address STRIDE's codes are sent from, or the code will not reach you. On every screen that asks for a code — verifying a new account, the confirmation code after your password and the password reset code — a Didn’t get your code? link opens the same advice.
- Check spam or junk first, then press Send a new code.
- Ask your IT team to allow email from notify.strideos.me. Press Copy for IT to copy the sender address, the subjects and the technical facts for them to paste into an email; it works without signing in.
- Just created the account? Have the code sent to another email
address. On the verification screen, press Didn’t get your code?, then
Send the code to a different email instead. Type the password you just chose and an
address you can open now, such as a personal one, and press Send code; enter the code
that arrives there. That address becomes your account’s confirmed alternate email,
and your sign-in codes go to it from then on. Password reset codes still go only to the address you
signed up with, and the sign-in screen always offers a code there too: confirming that address removes
the alternate and signs out every other browser. The address must not already belong to another
STRIDE account, as its sign-in email or confirmed alternate; if it does, no code arrives and the screen
does not say why, so nobody can use it to find out whose address it is. A
+tagor (for Gmail) dots do not make it a different address. Try a different one; you can use at most three different addresses this way. The address you signed up with stays unconfirmed, so team invitations sent to it do not reach this account yet, and if you later change or remove that alternate, your next sign-in asks for a code at the address you signed up with. Five wrong passwords in an hour pause it for an hour. - Or use a personal email address instead. On the verification screen, Sign out and go back, then create the account with a personal address. Once your IT team allows our email, you can add your work address under Account › Alternate email and confirm it, and your notifications are then sent there, and your sign-in codes too if you choose. Account verification and invitations still use the address you signed up with, so your team will need to invite your personal address. If you already use STRIDE, do not sign up again: ask IT to allow the sender, and your data stays in your existing account.
- Already have an account? Add a second address for next time. Once you are signed in, add a second address under Account › Alternate email (a work email once your IT team allows our email), confirm it, and choose My sign-in email and my alternate email under Send my verification codes to. If you already chose that, check the other inbox too.
Resetting a password
Type your email address first, then press Forgot password? The form is replaced by one panel asking for an eight-digit reset code, already on its way. It is a code, not a link, typed on the machine you are actually signing in on — so it does not matter which device your mail is open on.
Two codes, two lengths — and it is not a mistake
The code that verifies a new account is six digits; the code that resets a password is eight — the same one used when you change your password from inside the app. Count what arrived rather than what you expected; the rules are otherwise identical (one hour, a new code replaces the old). A reset code goes to your sign-in address, and also to your confirmed alternate if you chose to get your codes at both; the screen does not say which, because it is shown before anybody has signed in.
- A code lasts 60 minutes.
- Send a new code replaces the last; use the later if two arrive. (Twice within a minute is refused rather than sent twice.)
- A wrong, expired or already-used code reads the same — “That code did not match, or it has expired.” — on purpose: the request says the same thing even if that address has an account, so nobody can use it to find out who does.
A reset link already in your inbox still works. Before 6 September 2026 this step emailed a link instead of a code; any such link you still have, unexpired, opens the same page.
Sign out and go back returns to the sign-in form without redeeming the code; your old password keeps working. You can ask for a reset from any of the apps, but you always finish on the sign-in page, where the new password is set.
Once the code is accepted, the panel hands over to one more: choosing a new password, confirmed and submitted with Set password and continue. The rest of the app stays closed until you set one, so a recovery cannot be used as a way in. The same panel appears when an administrator has reset your account. After your own reset, your old password keeps working until you finish; after an administrator's reset, it does not.
Setting a new password after entering a reset code. The same panel opens after an administrator's reset, with a different note: “Your password was reset by an administrator. Set your own before continuing.”
The security check
Sometimes the page asks you to prove you are a person — a small box headed Security check above the button you were about to press. Most of the time it settles by itself; occasionally it asks for a checkbox. It shows up only when creating an account, asking for a password reset code, or after several failed sign-in attempts in a row — never on an ordinary correct sign-in. The Ask STRIDE panel runs it too, before each answer.
It is in addition to the emailed code, not instead of it
The security check does not replace the code we email you — creating an account still ends with the six-digit verification code, and resetting a password still needs the eight-digit reset code. Passing the check signs nobody in and proves nothing about who you are.
If it fails, press the button again — nothing typed is lost and it is not a mark against your account. If there is a checkbox, tick it first: until you do, the page says “Please finish the security check above the button to continue” and pressing the button does nothing else. If the box never appears or never finishes: reload the page; check whether an ad blocker or privacy extension is switched on for this site, since the check is served by an outside company and blockers sometimes stop it loading; try a different browser or network; or wait — after a few tries the page stops asking and lets you continue on the emailed code instead. Your administrator can switch it off for the whole application; there is no per-person exception.
Staying signed in — what Remember me on this device does
Your session refreshes itself while you use the app. Remember me on this device decides whether your sign-in survives closing the browser, and it also fills in your email address (never the password) next time.
- Ticked: STRIDE keeps you signed in on this browser, even after you close it, until you press Sign out.
- Not ticked: you are signed out when the browser closes, and nothing is left behind.
On a shared or public computer, leave it unticked and press Sign out (in the menu under your initials) when you finish. You are also signed out if the session goes stale from a long-untouched tab; sign in again. Changing your password signs out your other devices and each asks for a confirmation code again — this one stays signed in. See changing your password.
When you cannot get in
- "Invalid login credentials"
- The email or the password is wrong. Passwords are case-sensitive. If you are sure of both, reset the password rather than retrying — repeated failures are rate limited and will start being refused for a while.
- Nothing happens when I press Sign in
- Check the message under the button; it says what went wrong. If it mentions the connection, the app could not reach the server — try again in a moment.
- I cannot find the invitation email
- Look for the team's name, not this product's. An invitation to join a team arrives from the team that sent it and is headed by the team's own mark, so searching your inbox for the product name may find nothing. Search for the team, or for the name of whoever asked you to join.
- My verification code is refused
- Check that you are using the newest one. Asking for a new code replaces the last, so if two are sitting in your inbox only the later works. A code also stops working 60 minutes after it was sent, and after six wrong attempts that particular code is locked — in every one of those cases the answer is the same: press Send a new code and use what arrives. Nothing happens to your account, and a fresh code starts you over with a fresh six attempts. There is no registration code and never any need to ask anybody for one — the only code this product will ever ask you for is the one it just emailed to you.
- My confirmation code does not arrive or is refused
- The same answers as the verification code: check spam, use the newest code, and press Send a new code after 60 minutes or six wrong attempts. It goes to your sign-in address only. If a code can never reach you, ask a System Administrator to fix the address; there is no per-person exemption.
- I am signed in but an app says I have no access
- Being signed in is not the same as being granted access. A team administrator grants boards, and OKRs are off until a team switches them on. Teams and boards.
- "This account is inactive" or "This account has been removed"
- Your email address and password were correct — an administrator has deactivated or removed the account itself, and the sign-in page cannot tell you anything more specific than that. Contact your administrator. This is different from a reset account, which still signs in and only asks for a new password; an inactive or removed account does not sign in at all.
- I keep getting signed out
- Usually a browser set to clear site data on close, or private browsing. Both discard the session every time the window closes.
Keeping the account safe
Use a password you do not use anywhere else. Anyone who can sign in as you can read every task and note on your account — and, if you have saved an AI API key, can read that too. Nobody administering this application will ever ask you for your password.
Asking STRIDE before you sign in
The sign-in page has an Ask STRIDE button at the top right. It opens a small panel where you can type a question in your own words about getting in: signing in, creating an account, the codes, resetting a password, organizations and the Terms. The answer comes from this manual, and it links to the sections it used, so you can read the rest.
A label at the top of the panel names the step you are on — Sign in, Create account, Verify your email, Two-step code, Code didn't arrive, Code at another email, Reset password, Change password, Terms, How to use STRIDE, Join an Organization or Create an Organization — and offers a few questions to start from until you type your own.
- It answers only about getting in. A question about anything else gets a short reply saying so; once you are in, Ask STRIDE inside the app can help with the rest.
- It cannot see any account. It cannot tell you whether an email address has an account, and nothing here will. To find out, use Forgot password? as described under resetting a password.
- It will never ask you for a password, a code or any personal detail, and it is not a person. Nobody administering STRIDE reaches you through it.
- A God Mode holder switches it on. It may be switched off, busy for a while, or unavailable if its security check cannot load; the panel says so, and this manual has the same information.
What happens to your question
Ask STRIDE answers from STRIDE’s public help. Your question is sent to Anthropic’s Claude to write the answer, paid for by STRIDE. Don’t type passwords, codes or other personal details. STRIDE can’t see any account from here, so it can’t tell you whether an email has an account. We don’t keep your question or the answer. To stop abuse we count questions from your network for one day, without storing your address. A security check from Cloudflare runs before each answer.
The security check is the one described under The security check, shown inside the panel and run before each answer. Passing it signs nobody in and proves nothing about who you are.