Your tasks
Taskstasks.html
Your private workspace: everything you are working on. Nobody else sees any of it unless you deliberately share a task to a board.
New here?
This page covers everything. If you just want the core loop, read the two-minute version first: Tasks, Notes or the Calendar view.
Finding your way around
Signing in brings you here. Every page in the suite shares the same top bar:
- The navigation strip, after the STRIDE mark: My Work, Tasks, Calendar, Notes, Email, Team, Events (only where a team has it on and you have access), OKRs — up to eight entries side by side, not a heading over a group. Messages is not in the strip: the bell opens it. The page you are on is underlined. Every entry is an icon, at every width, including the one you are on; hover or focus any of them and it names itself.
- My Work opens a short menu — My team board, My OKRs, Help. The bell opens the Message Center over the page you are on, where a notification carrying a comment thread can be answered in place — type a reply and press Post reply, the same thread the source task or note shows.
- Search, in the middle, or ⌘K (Ctrl+K on Windows/Linux). It looks across tasks, notes, people, teams, boards and objectives at once.
- Create — a menu: Task and Task from email, then Note and Note from a task. On the team board the first reads Personal Task; on the OKR page a New objective row sits above them.
- Focus, which reads Everything until you narrow to one tag, the theme buttons, and your initials in the corner. On the second row, beside the search, are Refresh, the messages bell and Ask STRIDE. The bell wears a small blue count of what is waiting, which reads 9+ once there are more than nine. There is no Today button in the bar any more: today's count is the first row of the menu under your initials (see below).
- The theme buttons are Dark theme and Light theme, with a third — Custom theme — appearing wherever there is a custom color to show. See dark mode and light mode.
- Your initials are the menu. The corner shows a small circle with your initials rather than your name — hover it and it names you. Pressing it opens: your name at the head, then Profile & account, My settings, Team Settings if you administer one, and the page's own rows if it has any (the team board's, which its Actions menu lists too; Notes, the OKR board and Events keep Notes settings…, OKR Settings and Events access… in their own Actions menu). Then Admin console if you administer one, a separator, then Help — itself a submenu: Ask STRIDE, Help center (opens in a new tab), Did you know? and Quick Start guide. A second separator, then Sign out. There is no separate cog.
- Customize (the sliders icon) is the button for how this page looks; it sits with the page's own controls, not in the top bar — see Customize: every view option in one panel.
Task details
Your list 12
Utilities
The top bar, and the three columns under it: the Task details panel, your list, and the utility rail.
Below the bar, this page has four regions: the Focus strip across the top — your figures and quick chips, each a filter, with the list tools at its right; the left column: the task you have selected, its details, its conversation and where it lives; the middle, your list with its tabs and controls; and the right, the utility rail — clocks, weather, the month, your quick links.
Every boundary between those can be dragged, and every width is remembered. Either side column can be shut from Customize — Show the task details panel under Layout, and Show the Utilities panel under Utilities — leaving a narrow strip with the button that brings it back. Tasks draws no separate Utilities button in its tab row; Customize is the door. Utilities answers for this page alone: each of the Calendar, team board and Notes keeps its own set of widgets — see choosing the widgets on each page.
The tabs above the list are My tasks, On team boards, Watching, Emailed tasks and Completed. Looking for your own open tasks that also live on a team board? That is the On a board quick filter on My tasks. See work of yours that is out on a team board for On team boards, which means the opposite: work that is not on this list. Each tab carries its count in a small gray chip (a zero shows as a quiet 0, a count that has not arrived yet as a dash, and ten thousand or more as 10k+; point at the tab to read the exact figure), and Watching carries a second, red chip — N late — for how many are past due; see tasks you are watching. Emailed tasks turns yellow the moment it is carrying anything — see emailed tasks: mail you did not have to open.
Your list
The tab row carries My tasks, On team boards, Watching, Emailed tasks and Completed on the left, underlined, each with an icon; the arrow keys move between them. On the right of that row sit Momentum, an Actions menu and the Customize button. The List/Calendar switch is at the left end of the same row (press L or C), so it keeps its place when Momentum is turned off. The switch is named Show your tasks as a list or on a calendar; pointing at a half reads Your tasks as a list or Your tasks on a month, week or day calendar. How much of each task shows, whether the details and Utilities panels are open and how the list is grouped and sorted are all in Customize, which reshapes the page rather than narrowing the list. Actions is in sections, and a section with nothing in it does not appear: Create — New meeting…; View — Week agenda… and, on the Calendar's Week and Day views, a Show free time switch (it shows a check when on); Actions — Bulk comment… (on the Watching and On team boards tabs) Find duplicate tasks… and Import… (bring in tasks from a file); and the page's own settings, under Page settings: Configure Task View… and Email Preferences…. Refresh is the one in the top bar (or press R).
Show the filter bar, in Customize › Layout, hides the list tools in the strip. Filter…, Clear filters and your quick actions stay in view when it is off, so you can always see that a filter is on and clear it. The choice is saved with your account.
The list tools sit at the right of the Focus strip, not in a row of their own: Add task (its arrow offers Tomorrow, This Week, Next Week or No date); four date chips — Today, Tomorrow, This Week, Next Week — that narrow the list to that group, press again to clear; then the Organize link, which says how the list is arranged (for example Grouped by date · Smart) and opens Customize at Organize to change it; and, pushed right, an expand/collapse all toggle and Filter…; on the Calendar's Week and Month views Organize and the toggle are not drawn (they stay on List and Day). On narrower windows the date chips sit behind one Date button (it shows the active date filter's name, and only a calendar icon on narrower still) that opens the same list as a menu.
The expand/collapse toggle is a single button, not a pair, and it names what the next press will do. It is lit blue while every group is open, and reads Collapse all groups; it goes gray the moment any group is folded and reads Expand all groups. It acts on whatever grouping is current (by date, status or tag), is not drawn when there is nothing to fold, and it lasts only for the list you are looking at — switching tab or reloading puts every group back the way its contents decide.
A fifth chip appears when you are looking at one exact date. In the calendar widget in the utility rail, dates with open tasks are shown in bold; press one and a panel offers View tasks (narrows the list to that day) and Open Calendar (opens that week in the Calendar view of this page). A date with nothing due opens no panel at all — unchanged from any other press. Arriving from View tasks, the date sits with the other chips, lit the same way; Clear filters names it too.
Filter… holds Status, Tags and Assignee — each a section listing what is actually in play on your own work, with what you have chosen ticked. It is filters only. The button carries a count of how many filters are on, including the chips below, the figures above and your Focus tag. Clear filters sits beside it. Which quick actions you keep, and whether the strip shows, are in Customize › Quick actions.
The short switches are chips, not menu entries — Starred, On a board, Not on a board, Overdue, No date, Has an assignee, No assignee and Done this week. They sit in the Focus strip as a chip group with a bolt, ending in a + chip that opens Customize › Quick actions; every one you choose is drawn (out of the box, a chip that duplicates a figure such as Starred shows once, as the figure). When they do not all fit on the line, the rest are under a More chip just before the +: press it for a menu of the others, on the List and on every Calendar view. Put a missing one back from Which quick actions, and in what order in Customize › Quick actions.
Board remembers your choice. Pick On a board or Not on a board and it saves to your account across devices; the chip stays lit and the Filter… button counts it. Every quick action is remembered the same way until you clear it.
Overdue 1
Today 2
This Week 1
The tab row, the toolbar, your own row of quick actions, and the list grouped by due date.
Your own row of quick actions
In the Focus strip, a short group of chips you choose: out of the box Starred, On a board and Not on a board; pick your own in Customize › Quick actions (Show the quick actions and Which quick actions, and in what order). A single click only peeks; double click (or Enter) opens the full task.
It opens here, on this page, even when the task lives on a team board. The task's own editor appears over your list — a task on a team board opens in the board's editor, any other task in the task editor — and closing it puts you back exactly where you were, with the row still selected. The board itself is still a press away: Open on the board at the top of that window. The same is true everywhere else a task opens — from the Calendar, Events, OKRs, search, the Message Center or a link — none of them leaves the page you are on.
The Focus strip (folded until you open it, if you have never set it) and the Utilities rail each fold with their own control, and all three can be switched from Customize › Layout.
Minimalist — when you only want the work
Minimalist is a Page style in Customize (Display, choose Standard or Minimalist) — the same page, nothing removed, just a leaner layout: a lean navigation strip in place of the utility rail, the list at its densest (one line per task), and the selected task beside the list rather than across the page. Open the full task and a double click on a row both still open the full editor — a double click used to only select here, but that carve-out is gone: it opens the full task in Minimalist exactly as it does in Comfortable and Compact.
Comfortable and Compact are remembered separately, so choosing Standard again returns the page to the density you had chosen — which is also why neither density looks selected in How much of each task to show while Minimalist is on. It applies to this page only — Notes, the Calendar and team boards keep their own density — and it is a desktop arrangement; the phone has its own layout.
Tasks are grouped by when they are due, not by status — Overdue, No date, Today, Tomorrow, This Week, Next Week, In 2 Weeks. You never file a task into a column: it moves itself as its due date approaches.
No date holds the work you have not scheduled. It used to sit in Today, padding it with everything you had ever jotted down. Not having decided when something happens is a real answer, so it has its own group — above Today, because it is worth looking at before you start on the day, and below Overdue, since nothing here is late. The group disappears when nothing is in it.
- Drag a card to another group to change its due date. Dropping into Today sets the due date to today.
- Drag one into No date to clear its due date — or right-click the card and pick No date from Move to…, which is the first entry there because it is the only one that takes a date away instead of moving it.
- Click a group’s heading to fold that group away. The count stays either way. A group with tasks in it opens by itself and an empty one stays shut (Older in Completed stays shut until you open it, because it is history); what you fold or open by hand lasts until you switch tab, change a filter or reload, and is not saved. Use expand/collapse all on the toolbar to fold or unfold them all at once.
- A search opens a folded group that has matches in it, for as long as the search lasts; clear it and every group goes back to what its contents decide.
- The colored pill on each card is its status, changeable from the card. The star marks a task as important; the tick completes it.
Ticked something by mistake? Completing a task takes it off the board, so a short Undo appears at the bottom of the work area (centered at the bottom of the screen on a narrow one) for about six seconds and puts it back exactly as it was. It waits while your pointer is on it or you have tabbed to it. Press ⌘+Z (Ctrl+Z on Windows) when you are not typing to undo it without the mouse. If the task has changed since, the message says there is nothing to undo. Every message has a × to dismiss it. That is different from reopening a completed task from the Completed tab, which puts its original due date back.
Completing a task dates it the day it was done, so your list reads in the order work was finished. Reopening it restores the date it had before; a task completed before this change has none to restore and reopens due today.
The app remembers which tab you were on, and comes back to it next time.
Customize: every view option in one panel
Every choice about how a page looks — which panels are open, how the list is grouped and sorted, how much of each item shows, which widgets sit in the side panel — is in one panel called Customize, in the same place and the same order on every page. Nothing about how the work behaves lives there: what a task is, who can see it and what gets emailed are not view options, so they are not in it. Page actions and page settings stay on the page (on Tasks, the Actions menu; on the other pages, the menu under your initials or the item's own ••• menu).
Opening it
Press the Customize button (the sliders icon, icon-only) at the very end of the page’s top row — every page has one: Tasks, the team board, OKRs, Events and Notes — or press V when you are not typing. Press either again to close it. A short link on the page opens it at the right section: on Tasks, the Organize link beside Filter…; on OKRs and the team board, the Organize link in the strip. On the team board you can also choose Customize… from the Utilities rail’s ••• menu.
On a wide window the panel docks on the right and the page narrows to make room; on a narrower one it slides over the page. Docked, it is 440 pixels wide from 1280 pixels and 380 below that. Either way it is not a dialog: the page stays live behind it, so you can change an option and watch the page respond. Done or × closes it. Only one right-hand panel is open at a time, so opening Customize closes Ask STRIDE and the other way round.
The sections, always in this order
A page shows only the sections it has. Each is a card you can fold; its header says what is currently chosen, so a folded section still tells you where you stand. A row at the top (On this page) jumps to any section, and a Find an option box appears when the page has a dozen or more options — type a word like “group” or “width” and only matching rows stay. The order is:
- Layout — which parts of the page are showing (panels, bands, widths).
- Show and hide — which items appear on the page.
- Organize — how items are grouped, sorted and arranged.
- Display — how big and how detailed things look. Every page ends this section with Quick Start guide (this page's short tour; the Customize button glows until you have opened a guide), Theme and app font… and All settings…, which open My settings at its Workspace pane and at its start. On Tasks and the Calendar these three links sit in the panel's footer instead (see below).
- Day view, Week view, Month view, Free time and Outlook — Calendar only, and only the ones for the view you are on. They are described in Calendar options are in Customize.
- Quick actions — the one-press filters above the Tasks list.
- Defaults — how things open before you have arranged them.
- Utilities — the side panel of cards and widgets.
On Tasks, the panel follows the view you are on
Tasks has a List and a Calendar with Day, Week and Month, and the panel shows only what applies to the one on screen. Switch between them and the panel redraws at once, in place and without moving, even while it is open: your Find an option text stays, and a section you had folded stays folded. The sections are grouped so there are as few as possible to explore:
- List — 3 sections: List view, Quick actions and Utilities.
- Day and Week — 4: Day view (or Week view), Free time, Outlook and Utilities.
- Month — 3: Month view, Outlook and Utilities. Free time and Task size do not apply to Month, so neither is offered.
The view's section holds everything about how that view looks, sizes included, and is named for the view. Theme and app font…, All settings… and Quick Start guide are in the panel's footer in every view. A section or row that does not apply to the view you are on is not shown, so you never see an option that does nothing here. Find an option searches the view you are on; if the option you typed lives in another view the panel tells you where it is and offers a button that takes you there. Reset section and Reset everything for Week view… (or whichever view you are on) put back what you can see, and leave options that exist only in another view as they are. The header, the tabs and the panel itself stay the same size whatever density you choose; Compact only makes task rows smaller.
What the Tasks list offers
- List view — Show the task details panel (selecting a task brings it back), Show the filter bar, Show Work at a glance, Width of the task details panel (also set by dragging the grip beside the panel), Task size (five levels, see Task size), How much of each task to show (Comfortable or Compact), Page style (Standard or Minimalist, desktop only), Group tasks by (date, status, tag or no grouping; Today and This week in the calendar’s task pane are always grouped by day), Sort tasks by (Smart puts starred tasks first, then by due date) and Apply to all views.
- Quick actions — Show the quick actions and Which quick actions, and in what order. Reset section here puts back both the strip and the default set.
- Utilities — the side panel of widgets and cards (see Customizing the rail).
Each view keeps its own task setup
The List, and the Calendar's Day, Week and Month views, each keep their own task setup: the filters and quick-action chips you have pressed, Show the filter bar, Group tasks by, Sort tasks by, Show the quick actions, Which quick actions, and in what order, Task size (List, Day and Week; Month has none) and Show tasks you have completed (Day, Week and Month). Changing one in Day never changes the List, Week or Month. In Customize these rows edit the view on screen, and each row's tag names it (List view, Day view and so on). A view you have not changed yet starts with the List's setup, so nothing looks different until you change it. After that, changing the List does not change the other views: they keep the List setup they had. Group and sort appear in Day, where tasks beside the day are a list; Week and Month place tasks on their days. In All settings › Tasks, Group by, Sort, Show the quick actions and the quick-action list also edit the view on screen and carry its name; with Week or Month on screen, Group by and Sort are dimmed and say why.
Apply to all views, at the end of the view section, copies the setup of the view you are on to the other three, once. It is a copy, not a link: each view can change again afterwards. A message offers Undo, which puts every view back as it was. Reset section and Reset everything change only the view you are on.
Task size
Customize › Display › Task size sets how big every task row is on the List, in five levels: Default, Roomy, Detailed, Large and Full detail. It sizes the text and the row height; it never hides anything. From Detailed, a long title or description wraps instead of being cut off, except in Compact and Minimalist, which stay one line. It works with How much of each task to show: that choice says how many lines a task gets, and Task size says how big they are.
On the Calendar, Task size sizes the tasks in Day and in Week (each view keeps its own; Month has none), and Calendar size sizes the meetings and everything in Month. The same level is the same text size on all three, and at Default they match. Times, dates and counts follow your application font. Each size is tagged This window size: it is kept separately for wide windows (1280px and up) and narrower ones, and each window keeps its own until you sign out. Reset section returns the sizes to Default. See Calendar and task sizes.
Each window keeps its own layout
If you keep Tasks open in two windows, each one keeps its own layout. That covers List or Calendar, the view, Day layout, group, sort, filters, folds, sizes and which panels are open. A window comes back the way it was when it reloads, and when you press the browser's Back button to return to Tasks from Notes, Team board, OKRs, Events or Admin. A window on the Calendar returns to the Calendar; a window on the List returns to the List with its own filters. The top Tasks link, the STRIDE logo and the other links that say Tasks always open the List, even in a window that was last on the Calendar; use the top Calendar button for the Calendar.
Every change is still saved to your account, and the last save wins: a new window, or a new sign-in, opens with the layout you saved most recently. A window that is already open does not take on another window's changes. Signing out ends a window's own layout. Notes, OKRs, Team board and Events are not affected and always open with your saved choices. A link that names something, such as a day on the Calendar or a task, opens what it names. The top Tasks link always opens the List, with this window's own filters and grouping.
The tag on each row: how long a choice is kept
Not every choice is kept the same way, so each option wears a small tag saying so:
Hover a tag for its full wording: This visit says Kept until you leave or reload this page, then back to your default.; Saved says Saved to your account and kept from one session to the next; This session says Kept until you sign out, then back to your default.; This browser says Kept in this browser only, for anyone who signs in here.
- Saved — saved to your account, so it comes back next session and on your other devices. Saved · All pages means the same choice applies on every page that has it (the Utilities panel width, for example).
- This session — kept until you sign out, then back to your default. The OKR board’s arrangement choices are this kind.
- This browser — kept in this browser only, for anyone who signs in here.
- This visit — kept only while you stay on the page: it survives moving around inside it, not a reload. Opening or closing the task details panel yourself is this kind.
- This window size — saved, but separately for wide windows (1280px and up) and narrower ones, so a phone-sized window does not overwrite your desktop layout.
- Saved · This window — a layout choice on this page, saved to your account for new windows while this window keeps its own until you sign out (see Each window keeps its own layout).
Each option is one row: a switch or choice under its name, with a short description beneath, so a long name is never cut off. A choice that belongs to the view you are on but cannot be used right now is dimmed with the reason under it — and sometimes only one of two options is, such as Beside the day, which says Needs a wider window while Below the day stays available.
Links such as Reset the column widths or Widget settings carry no tag because they hold no value.
Reset section, Reset everything, and Undo
Reset section, at the foot of a section, puts that section’s options back to their defaults. Reset everything on this page…, at the foot of the panel, asks first, then does the same for every section. Both offer Undo afterwards that puts back exactly what you had. A reset touches only this page’s view options — never your tasks, notes or team settings.
Changes apply the moment you make them. If one cannot be saved the panel says Not saved yet. It will retry with your next change with a Retry now button. A page with nothing to customize says so and offers All settings…. If a single row cannot be drawn it says This option could not be loaded. and the rest of the panel still works. A search that matches nothing says No option matches “group” here and reminds you that options for other pages are on those pages; Clear empties the box. The confirmation reads Reset every option on Tasks? Undo will be offered., or, on the Calendar, Reset every option for Week view? Undo will be offered. (or Day, or Month).
Editing a task
Click any card and it opens in the Task details panel down the left of the page. With nothing selected the panel says Nothing selected.
The panel only closes when you close it. When the task you have open leaves your list — you hand it to someone else, complete, archive or delete it — the panel stays open on Nothing selected. (Unticking Show in my tasks is the exception: the task stays open, see below.) Pick another task to fill it, or press its X to close it.
Double click a row, in any density, to open the full task editor — a single click only selects. Enter, the row's … menu (Open the full task) and right-click all open it too. The in-app hint, in the list footer, says so verbatim: “Double click for full detail”.
The panel has three tabs, and the app remembers which one you were last on:
- Details — status, due date, owner and assignee, then Draft follow-up… (or, on a task that arrived by email, that message's card with Draft follow-up… and Read the email inside it). Then the description, with Collaborators & Tags folded above it and Links, repeat and files folded underneath. Each opens by itself when the task has something in it — a collaborator or a tag, a link, a repeat or a file — and stays shut when it is empty. Opening or closing one lasts only while that task is open; nothing is saved. Collaborators & Tags says who and what is on the task on its own line while it is shut.
- Comments — the comments on this task, and the box to add one; carries the count when there are any. See comments, mentions and messages.
- Where it lives — which team board and which event it is on, the outcome it supports, where it came from, and its history. See sharing a task to a board.
Tab reaches the strip once; left/right arrows move between them.
The Task details panel. The icons along the top are star, complete and delete, then more actions, open the full task, close and collapse.
If you can see a task but not change it, it shows View only and offers only what you may do: watch it, set your own reminder, open its links and files.
There is no Save button — and the panel says so
Every field in this panel saves itself a moment after you change it — there is no Save button. A line at the bottom tells you where a change has got to: Changes save as you type, Saving…, All changes saved (in green, with the time), or a red message saying the last change was not saved (nothing is lost; check your connection and edit again). It stays until it is no longer true. The full task editor says it too — opening a task in full, in the larger editor or on a team board, carries the identical line — see editing a task on a board.
While a change is being saved, the save line shows a turning ring and Saving…; it turns to a green check and Saved, which fades after a moment. If a change could not be saved it shows a red warning with the reason, and stays until your next change. If you refresh or close the tab before a change has saved, your browser asks you to confirm and STRIDE sends the change as the page closes; moving to another STRIDE page saves first and then goes, without asking.
Above the tabs is the task's title, editable in place — Enter commits it, Escape reverts. Above that: star, complete (becomes Reopen once finished) and delete, then more actions (the row's … menu), open the full task, close (lets go of the task, panel stays) and collapse (puts the panel away).
- Description is a rich-text field — headed Notes on this task — with the same formatting bar the notes editor has. Paste an email straight in; tables, lists and formatting survive. Copying out of it gives you plain text, not this app's fonts, colors and list styling. Pasting in is unchanged, so an email you paste still keeps its formatting.
- Tags are yours to define, with your own colors.
- Attachments have a per-file size limit, shown beside the Choose files button in a single-row dropzone (a God Mode holder sets it, so it can vary). Anything larger is refused by the server as well as the page. Anyone who can see the whole task can open its attachments, and download links expire after an hour. While files upload the line under the dropzone names the file and counts them (Uploading “plan.pdf”… 2 of 3), the picker is off, and it ends with Uploaded 3 files. or the reason one was refused.
- Deleting a task deletes its attachments from file storage too, and its screenshots. No one can open them once the task is gone. Archiving a task keeps them.
- Where it lives is the tab that puts the task on a team board — see sharing a task to a board.
Work you have not scheduled: the No date switch. In the full task editor (expand icon, or on a team board), a small switch under the due-date field marked No date. Turn it on and the due date clears, the field itself reads No date, and the card moves into the No date group. Turning it off sets the due date to today, cursor in the field, ready to change — it does not guess a date for you. It moves on its own, too: type a date, or drag the card into a date group, and it turns itself off. There is nothing extra to save.
From the list you do not need it. Drag a card into the No date group, or right-click and pick No date under Move to….
The checklist on a task
A task can carry one checklist, in a section of its own in the full task editor — and it is the same checklist a note has: it looks, works and links exactly like a note's checklist. Items sit in five categories — To-do, In progress, On hold, Complete and Parking lot — and the folded header summarizes them, e.g. 2 to-do · 1 in progress · 1 complete.
It is the same checklist wherever the task is opened, including the team board's task editor — one list, so collaborators edit the same items. Where you can see a task but may not edit it, the list is read-only and you can still open what it links to.
Flag an item as high priority with the flag beside its tick, Alt+P, or Mark high priority on its … menu: it moves to the top of its category for everyone who sees the task. Heads down, beside the checklist's …, pins your flagged items above the categories, for you only, on every checklist — see Flagging an item as high priority, and Heads down.
Drag a row to move it, within or between categories, or use Move to on the item's … menu (or right-click the item) to move it without a mouse. From the keyboard, focus the item's text and press Alt+↑ or Alt+↓ to reorder it within its own category. Moving an item into Complete is what marks it done.
Each item has a title and a description, in two columns (stacked on a narrow screen). Click either to edit it in place: Tab moves from the title to the description and on to the next item, Enter saves and Esc undoes. The description is plain text, up to 1,000 characters, and is copied into the task once when you make a task from the item.
The description is one line at rest: text that does not fit fades out at the end, and the full text is in the tooltip. It grows when you click into it and shrinks again when you leave.
The colored avatar on an item with a task is a button that assigns that task to someone. It shows Loading people… while the list loads, then the heading Assign this task to. Who appears depends on where the checklist is: on a note, the note's people; on a personal task, its owner, assignee and collaborators; on a team task, that board's members. Anyone you do not share a team with is grayed out with Not on a team with you. A search box shows when there are more than eight people. You only get the avatar button when you are allowed to reassign that task: its owner, its assignee, a collaborator, or a board member.
An item can point at a task and at a team task, both at once, from its … menu (a screen reader announces it as Checklist item actions; the checklist's own … beside the areas is Checklist options):
- Make a task and Make a team task create the work from the item. On your own task, Make a task creates one of your tasks; Make a team task creates it and asks which board to put it on — close that without choosing and it simply stays your own task. On a team board's task, Make a team task comes first and creates it on that same board, in that same topic, and Make a task creates one of your own tasks from the item — it is yours, assigned to you, and on no board.
- Link to a task connects an existing task — typing searches every task you can see, including ones you watch or are assigned, and each row says whose it is; Link to a team task searches every board you belong to. On a team board's task, linking one of your own tasks moves it onto that board and links it as a team task. Unlink clears a link without changing either task.
- Link to an objective or to a key result adds a third, independent link to an outcome.
- Comment opens the task's own Comments tab with the item's text already typed as a starting line — the same thread every other comment on the task uses.
A linked item shows one chip that carries the task and its due date, followed by the assignee's initials, such as Task · Today or Team Task · Thu 16 Oct. Once the task is finished the date gives way to Task · Complete, even if it was due tomorrow. Pressing the chip opens that task's editor over the page you are on. The chip's color says how the task stands, the same way on both kinds: green when it is complete, red when it is overdue, yellow when it is due today or tomorrow, and plain gray when it is due later or has no date. A screen reader hears the same thing in words. The initials are always the task's assignee — yours, when it is assigned to you — and the owner only when nobody is assigned. Every linked task the page can read has one: someone whose name you cannot see shows as ?, and hovering it says whether that person is the assignee or the owner. Moving an item into On hold sets its linked task to On Hold too, and moving it out puts the earlier status back. Ticking items never moves the figures at the top of the page.
The checklist's own … menu has Remove the checklist…. Once an item has made a task with Make a task, its confirmation lets you decide: Remove the checklist and these tasks deletes the checklist and only the tasks it made; Remove the checklist, keep the tasks removes only the list. A task you merely linked is never deleted, and neither is a team task. Before anything happens, the confirmation, headed “Remove the checklist?”, lists by name each task that will be deleted and each one that will be kept. If a made task has since moved onto a board, or is no longer yours, it is kept and the list says why. A task you can no longer open is kept and listed as A task you can no longer open (a team task, as A team task you can no longer open). Every team task it points at is named in the list of what is kept.
Turning highlighted text into checklist items
Select some text in a task’s description, then press the checklist button in the formatting bar (Add to checklist) or Ctrl+Shift+9 (⌘+Shift+9 on a Mac). The button is on only while text is selected. Each line or bullet becomes one checklist item, as plain text: formatting, images and links are left out, and bullets, dashes and numbers at the start of a line are dropped. A line of 120 characters or fewer is the title; a longer line is cut at a word and the rest becomes the item’s description. It appears in the larger task editor, where a task has a checklist; the task drawer has no checklist, so it has no button.
Items land at the end of To-do, in the order you selected them, and the text you selected is not changed. An item already on the checklist is skipped, and the message says how many (Added 2 checklist items · 1 already there). The message has an Undo that removes exactly those items. A selection of more than 50 lines asks you to confirm first. A comment box has no such button, and neither does a checklist you can only read.
Links: up to five references on a task
A task can carry up to five reference links — a JIRA story, a design doc, a pull request, a Slack thread — in the Links, repeat and files section under the description, wherever you open the task.
There is no dialog and no Save button. Press Add link, type a label and paste the address; it saves the moment you move on. The row shows the name you gave the link, not the web address — press the pencil to see or change the address, open to follow it in a new tab. Hovering the open button shows exactly where it goes, and a link whose address cannot be opened says so under the row and shows you the address without being asked. Add link counts as you go — Add link (2 of 5) — and refuses a sixth.
A link you leave unnamed is labeled "Link" rather than showing the web address.
Links from an emailed task are added for you. At most five links found in
the email are attached automatically, named from the email and marked From the email.
Links in the sender's signature (their website, social profiles, booking page), in a legal
footer, or in older messages quoted below the email are left out, and the same link sent more
than once counts once. Links that open the same thing are folded into one, too: a Zoom
meeting's join, chat and invitation links become one link named after the meeting, and a
SharePoint, OneDrive or Google document shared in two forms is one link named after the
document rather than Share. When you forward an email, the links in the message you forwarded are kept.
When the AI Assistant reads the email, it picks the links the email actually refers to, most
important first, keeping one of several that lead to the same place (such as repeated buttons
in a booking confirmation); it can only choose among links found in the email, never add one.
When the AI Assistant reads the email, it also tidies each link's name into a few words from
the email, such as Main Deck rather than an image code and a number. STRIDE checks
every name it suggests, and keeps the email's own words when one doesn't pass.
The original-email viewer shows its web addresses as real links; anything else, such as a
javascript: address, stays plain text.
Creating a task by email
You can create a personal task without opening STRIDE at all — mail it. Open the AI Assistant panel from the top bar for the address to send to.
Send from your primary sign-in email or a verified alternate registered to your account; a message from any other address is not matched to you and nothing is created. Add and verify a second address in account settings first if you want to send from it.
Your own AI Assistant reads the message and writes a task from the subject and body. The task is personal, and due today — it lands in your own list, never on a team board. The Owner is you, taken from the account STRIDE matched you by; nothing in the email can set an owner, assignee, team, board or due date, however it is worded. If that account has no name set, the owner is left blank rather than filled with your email address.
Nothing you send from a recognized address is ever thrown away. If no team you belong to has this feature on, or your account has no AI Assistant set up, the message is still kept — it arrives as an unread task in Emailed tasks instead, carrying the email's own subject and body, with its description saying why nobody read it.
Files attached to the email are added to the task, under Attachments, a minute or two after the task appears. They follow the same rules as a file you attach yourself: the same size limit per file, the same accepted types, and at most 10 files from one email. A picture that belongs to a signature or to an earlier message quoted underneath, such as a company logo, is left out; a screenshot pasted into the message itself is kept. If a file could not be added — too large, a type STRIDE does not accept, or the sender's address could not be verified — the task's description ends with one line naming it and saying why, for example (1 attachment in the email was not added: setup.exe — a file type that cannot be attached.) Files are not scanned for viruses, the same as a file you attach yourself, so open one only if you trust the email it came in. An email with files and no text still becomes a task. The AI Assistant never reads the files; it sees only the subject and the text. A reply that is added to an existing task as an update brings its files to that task too.
The panel counts what happened — messages succeeded and failed, by unique message. If you cannot see the address itself, the panel reads Not available and says why, and your mail still lands, unread, in Emailed tasks.
Reading the email a task came from, and replying to it
A task made from an email keeps the message. Open the task and, directly under Owner and Assignee, a small card says This task came from an email — who sent it, the subject, and when it arrived. Press Read the email to see the message, or Draft follow-up… to reply. In the full editor the card sits under the description instead.
It is the message as text — formatting and images are not kept. Files attached to the email are on the task itself, under Attachments.
The description is tidied for you, once, the first time you open a fresh task like this: STRIDE quietly runs Tidy formatting with AI on the description. It needs an AI assistant configured; with none it does nothing, silently. It never repeats once the description has real structure, and leaves you alone if you are already typing when the task opens.
Draft follow-up… opens the follow-up dialog, which replies to the latest email on the task, addressed to the person who sent it, with the subject prefixed Re:. Nothing is sent on your behalf: you send it from Outlook. When you forwarded somebody else’s email in, the reply goes to them, not back to you: STRIDE reads the quoted From: line your mail program writes on a forward and skips your own sending address. If a forwarded message carries no readable sender, the To line is left empty rather than addressed to you. Nothing in the body can redirect it. Who the draft is addressed to has the details.
The card is only ever on tasks that arrived by email, and only in your own list — a saved message can be read by the person whose address sent it and by nobody else.
The copy is kept for 90 days from the day the message arrived, then removed. Deleting the task removes it at once. The task itself — title, description, sender, subject — is untouched either way.
Email reminders on a task
A task can email you about itself until it is done. Reminders live in the full task editor (the expand icon, or the team board). Reminders sits between OKR and Attachments — unfold it, choose a schedule, and press Save reminder. Nothing is stored until you press it.
- Frequency — Hourly, Daily, Weekly or Monthly.
- Time of day — when it goes out. On hourly, this is the minute past the hour.
- Starts — the first day it is allowed to send.
The Reminders & Reoccurring Setup section of the full task editor, folded away with the rest under the description. Shut, it reads the schedule back to you in a line.
The time you pick is read in your own time zone.
Here it reminds you, and only you, at whatever address your account has for notifications — see where notification email goes. The team board's version lets you choose who is reminded, from that board's own people; see email reminders on a board task. The reminder is yours, not the task's — removing yours removes yours alone.
Three things stop a reminder from sending at all: completing the task, archiving it, and removing the reminder — not the due date passing, not a comment. Two further things stop one reaching you without touching the schedule: taking yourself off a reminder somebody else set, and switching task reminders off in Settings → Email, which stops all of them at once.
Neither completing nor archiving throws the schedule away — reopening a completed task starts them again, and so does restoring an archived one. Remove reminder is grayed out until there is one to remove.
When a reminder actually sends
A scheduled job in the database looks for reminders that have come due every five minutes, around the clock — nobody has to have the application open. A reminder never arrives twice, and a catch-up is not a backlog: one that was missed sends once and then moves on to its next time rather than backlogging. Treat it as a nudge, not an alarm clock: it arrives within five minutes of the time you set.
The Reminders section is not there
- You are looking at the side drawer rather than the full editor. The side drawer on the Tasks page has three tabs and no foldable sections, so press expand; on a team board the section is already in the task's own panel.
- The task is brand new and has not been saved yet.
- A God Mode holder has switched application email off altogether.
- The task is on a team board and no team owning one of those boards has email on — a team admin turns it on under Team settings › Email. One team sending is enough for a task shared onto two boards.
Spotting a reminder from the list
A task with a reminder now carries a small bell on its row, beside the repeat marker: the bell, then how often — Daily, Weekly — with the whole schedule in the tooltip. In Compact the word drops and the bell stays, exactly as the repeat marker does.
- It says whose reminder it is. Hover it: your own reads “Email reminder — Daily at 9:00 AM”, and one somebody else set reads “Email reminder set by Ashley Smith”. A task can carry both.
- You only ever see reminders that concern you — ones you set, and ones somebody else set that name you. A reminder between two colleagues on a task you can see is not shown to you, and that is decided by the database rather than by this screen.
- It says nothing until it knows. The bells arrive a moment after the list draws, so a row with no bell in the first instant is not an answer yet.
Two rows: one that repeats and reminds, and one that only reminds. In Compact the word drops and the bell stays, exactly as the repeat marker does.
A reminder somebody else set, that names you
Anybody on a board can put a reminder on a board task and choose who it goes to, so a reminder you did not create can start arriving. You can see it, and you can take yourself off it.
Every reminder somebody else set sits in its own block at the foot of the Reminders section, headed Set by somebody else, with the schedule and who set it: Daily at 9:00 AM, from Sep 5, 2026 — set by Ashley Smith. The control beside it is Stop reminding me — not Remove reminder, which is for one you created — and asks you to confirm first.
The same section, on a task somebody else has set a reminder on. Their reminder sits in a block of its own, under the reminder you set for yourself.
- You do not need to ask the creator or an administrator; it is yours to give up.
- It takes you off, and nobody else — the reminder carries on for everybody else it names.
- You cannot change it or delete it — a reminder belongs to whoever created it. Only they can put you back on; they are not told when you leave.
If you were the only person it named, the schedule stays on the task, reading Nobody is selected, so nothing is sent for its creator, who can put somebody back on it, change it, or remove it. Shut, the Reminders heading counts these after your own schedule — 1 set by somebody else — so one is never hidden behind a closed section. This is a board matter; a task nobody shares can only ever remind you.
Two ways to stop reminders reaching you
- Stop reminding me, on the task, is about one reminder — every other reminder on every other task still reaches you.
- The task reminders row in Settings → Email stops every task reminder addressed to you, on every task and board, without changing any schedule — switching it back on starts them arriving again.
Take yourself off a reminder you want to be rid of for good; use the Settings row for quiet without giving up your place on anything.
Giving the editor more room: the floating window
The expand icon at the top right of the editor pops it out into a larger window in the middle of the screen. The rest of the app stays fully visible behind it. Press the same icon again, click outside the window, or press Escape to dock it back.
Printing a task for somebody who was not there
Print or save as PDF… is how one task leaves the application for somebody with no sign-in: a clean, plain page carrying everything the task holds. It is on the row's … menu, on right-click anywhere on that row, and the drawer header's … — one menu reached three ways. Your browser's own print dialog opens.
What is on the page, in order: the title; a line of status, board, due date and who it is for; the facts (owner, created, last change, repeat, source, external link); tags; the description; the objective/key result it supports; every linked note in full, with its checklist; the attachments; and the conversation. A section with nothing in it is left out rather than printed empty.
Files are named, not linked
Attachments print as filenames and a count, not as links to the stored file. A conversation with nothing in it prints Nobody has written on this task, while every comment together with who wrote it prints when there is one; a conversation that could not be read at all is left absent rather than printed as “0 comments” — that would be the page telling you something about the task that is really something about the network.
Print with an AI summary
With an AI assistant configured, a second entry, Print with an AI summary…, adds one paragraph at the top of the packet reading the task for somebody meeting it cold, marked as an assistant's reading rather than the record. It costs your own API credit, unlike the free plain print, and is simply absent with no assistant configured.
Writing that paragraph is the one part of printing a task that leaves your browser — the plain packet never does. Your assistant is given the task's status, tags, objective/key result, full description, every linked note and checklist, attachment names, and the whole conversation with authors. Use Print or save as PDF… instead if you would rather colleagues' names and the discussion stayed off the network. Anything that cannot safely be shared with an assistant is left out of what it is shown, and the status line says which parts were held back.
If the summary cannot be written — no credit, no network — the packet still prints, without it, and the reason appears in the status line.
Putting a task straight onto a note’s checklist
Notes: Add checklist item…, on a task’s … menu, puts the task onto a note’s checklist without leaving your task list. Search for the note, then type a new item or click one already there; a new item lands in To-do, creating the checklist if needed. The task is linked to the item either way, openable from both sides. If the task is already linked from another item in the same note, you are asked before the link is moved. A link from a different note never asks. The new item has a title and a description, edited in place as on any checklist (see The checklist on a task).
The same dialog opens from inside a task. In the full task editor, press Add to note under the title. A team task has the same button in its editor on the team board. Linking a team task writes only to your note. Nothing changes on the board. To unlink, use the checklist item’s menu on the note.
Who a link lets in
Linking a task to a shared note adds the people that note is shared with as collaborators on the task — the same when a task is created from a note's checklist item or linked to a team task or an objective. They must be active members of your organization; a note you have not shared adds nobody.
Unlinking does not take the access away again. Remove them yourself in the task's Collaborators field when you want them gone.
Seeing collaborators from the list
In Comfortable density each task row shows collaborators as a row of initials; press the gray circle after them to open the editor and change who is on it. Past four people the row shows a count instead. Compact density leaves them out.
Screenshots and files on a task
Paste a screenshot into a task’s description or a comment, or drop an image onto the box. It uploads to file storage and sits as a placeholder until it is ready. A screenshot in a comment or a description is shown at Large size by default, the largest size there is, so a long thread stays readable. Click it to see it at full size in a viewer over the page. Press Escape, Back or the close button to return. Tab to an image and press Enter to open it the same way.
To change an image’s size, select it while you are editing and use the toolbar’s Size menu, headed Image size (L, M, S, XS, for Large, Medium, Small and Smallest), or press Alt+1 to Alt+4. Right-click an image (long-press on a phone or tablet, or press the Menu key or Shift+F10) for Cut, Copy, Alt text… and Delete. Large is 450 pixels wide at most, Medium 338, Small 252 and Smallest 189. An image is never wider than its column. Double-click opens the full-size viewer. Undo brings back a deleted image. The viewer says Loading… until the full-size image arrives. On a read-only image, right-click still shows the browser's own menu.
Copy gives the original. Copy a selected image from its right-click menu or with Ctrl+C (⌘C on a Mac), and STRIDE copies the screenshot as you stored it, at full resolution, whatever size it is shown at. Paste it into a task or a note and it arrives at Large. Another app receives the full-size picture. The full-size viewer has a Copy image button that does the same.
A file attached to a task may be 5 MB at most by default. An administrator can raise the limit to 25 MB. A change to the limit never affects files already attached. Each file is checked for size and type before it is stored.
Notes
Switch to Notes for longer writing — meeting notes, plans, anything that is not a task. Notes are always private.
Find action items, in the AI assistant card beside the note, reads what you have written and pulls out the concrete follow-ups. It creates nothing: each is listed and parked on the note's checklist under Parking lot, where you promote the ones you want with Create task. Reading a note twice does not duplicate anything already there. The card needs an AI assistant configured, and it says so rather than guessing until the note has something in it — on a blank note there is nothing for it to read, so pressing it answers write the note first instead of calling an assistant for nothing.
Kate Ross walked through the rollout plan.
Send the revised timeline to Bob Smith by Friday.
Budget stays as agreed.
AI assistant
A note, with the AI assistant card beside it. Nothing it finds is created — each line is parked on the checklist for you to keep or drop.
To make one task out of the whole note, open the note's … menu and choose Make a task from this note. It creates a personal task due today, carrying the note's title and tags, linked back to the note.
Narrowing the list: the filter strip
Above the note list is a row of counted chips: All notes, Private, Shared, Updated today and Recently updated (last five business days: weekends are skipped, public holidays are not). Press one to narrow the list, press again (or All notes) to clear.
Groups: organizing notes into sections
Use the folder icon at the top of the notes list to make groups. The list then shows one section per group, foldable by its heading. A note belongs to one group at most, and there are two ways to file one: drag the note onto a group heading, or use the GROUP dropdown beside the note's title while it is open — the keyboard route, and not a lesser one. To file an unfiled note without dragging, the folder icon's File the open note in row does it.
Unfiled notes appear under Ungrouped at the bottom. Groups can be archived (section disappears, notes stay put) or deleted (cannot be undone) — either way your notes are never deleted with it, they become ungrouped.
Putting the groups in the order you want
Drag a group by the handle on the left of its name in the Groups panel; the sections in the notes list underneath move with it — there is one order, not two — and the order is saved to your account, matching what My Settings shows. The … beside a group also has move up and move down (or Alt+arrow), which is the route on a phone, where there is no drag handle.
Sizing the notes list
Drag the edge between the list and the note to resize it, the same way the utility rail on the other side works. Tab to the edge and use the arrow keys if you would rather not drag; Shift moves faster. The width follows your account. The notes rearrange themselves to fit. At normal width each note is two lines — title/date, then preview; drag the list wider and each note becomes one line; squeeze it narrow and they go to three.
A denser notes list
The button beside the folder icon switches the list to compact, dropping the preview line so roughly twice as many notes fit, keeping the title, date and open-action-item count. The choice follows your account.
Sending a note to someone
Open the note's … menu and choose Print note…. It builds a clean, plain page for your browser's print dialog (Save as PDF is the usual destination), carrying the title, group, owner, who it is shared with, every page with its name and date, the full text, the checklist, the tasks made from it, and the conversation. Files are named, not linked — open the task to download one. If the note was shared with you, the packet says “Shared with: you” rather than listing names.
The envelope beside it prepares a draft in Outlook instead, carrying the title, dates, tags, the summary, the action-item checklist and the note body. Each action item carries who it is for and where it goes — the assignee, the board and the team, printed under the line itself (an item with no board says Personal list).
- Open the note and click the envelope.
- A small
.emlfile is saved to your downloads. Open it. - Outlook opens it as an unsent draft. Add the recipients and press Send.
Why a file rather than a mail window
A plain "email this" link can only carry about two thousand characters of unformatted text, dropping the summary, checklist and tables. A message file carries the whole thing, and nothing is sent on your behalf.
Creating a task from a note
The note's … menu offers Make a task from this note, and a checklist item offers Create task. The task is created as you press it and the Tasks page opens with it already selected.
- It starts as an ordinary personal task — named after the note (or checklist line), due today, carrying the note's tags.
- To put it on a team board, open the task's Board & Events section and pick the board — see sharing a task to a board.
Either way the task is linked back to the note, appearing in its Related tasks card, and carries a 📝 marker showing where it came from.
One task at a time, not several at once onto a board
Each action item promotes to its own personal task, one at a time. Turning everything a note found into work on one chosen team's board, in a single step, is not something this page does. Promote each with Create task and move it there yourself.
Repeating tasks
Set a task up once as recurring and the next one appears when you finish this one. Open the task and use Repeat under the due date: pick Daily, Every weekday, Weekly, Every 2 weeks, Every 3 weeks, Monthly, or Custom for particular days, a different interval, or an end date. The button shows the schedule in words — “Every Monday”.
The next one appears when you finish this one
Nothing is scheduled ahead of time. Complete the task and the next occurrence is created then, as a new task with its own due date; the finished one stays completed in your history. There is only ever one waiting for you.
The new task has the same title and description, starts at To-do, and is owned by whoever completed the last one. It keeps the same assignee, unless the person who finished it no longer shares a team with that assignee — then a personal task is assigned to whoever finished it, and a board task is left unassigned. On a team board it starts in that board's first column. The finished task keeps its own comments and link to its note; the new one starts clean and carries a Created from… link back to it.
Reopening and finishing it again, or a double click, never makes a second copy — unless you deliberately delete the next one, in which case finishing the task again creates a fresh one.
Finishing late does not drag the series with it — the schedule is anchored to the due date. A monthly task due on the 31st falls on the 28th in February. Under Custom you can stop the repeat on a date or after a number of occurrences; to stop at any time, set Repeat back to Does not repeat — past occurrences are untouched.
If you cannot see the Repeat control
It is hidden rather than shown as a control that cannot save. Ask whoever administers the app.
Quick links beside Task Actions
Your links sit to the right of Task Actions, under the title Task Actions & Quick Links whenever at least one is showing.
They come from two places. Anything your teams have published arrives already switched on; you can also add your own, in Settings → Quick links: type a label and address, press Add, as many times as you need.
- You see the description, not the address — hover a link for the address and the team that published it.
- Each opens in a new tab.
- There is no limit on how many you can show. There used to be four, and that stopped being the right answer when the card became resizable: drag the card's bottom edge taller and a longer list scrolls — Nothing is refused and nothing is quietly dropped.
The height you drag is remembered for that page.
Switching a team's link off is your choice alone
It changes nothing for anybody else, and you can switch it back on any time. You cannot edit a team's link here — only a team administrator changes those, in Team settings.
Finding a task
Four ways, depending on what you remember:
- Search in the top bar matches the title, the owner and the assignee as you type. It applies to whichever view you are in. This is the same box Search everything uses with its scope switched to This page; switch it to Global to reach your notes, your other teams' boards, and the objectives and key results you can see, not only this list.
- The calendar in the right-hand rail: click a day to show only tasks due then. Shift-click a second day for a range.
- The assignee filter narrows the board to one person's work. It only offers people who actually appear in the view you are looking at.
- Tags — click any tag chip to filter to it.
Filters combine, and a banner above the board tells you what is currently narrowing the list. Clear filter in that banner puts everything back.
Who a task is for
When Claude finds tasks in a note, it also works out who each one appears to be for — and then suggests them, rather than assigning them.
A suggested person shows as a dashed chip beside the task: Likely when the note gives a full name that matches one person on the board, Maybe when it gives only a first or last name and exactly one person answers to it. Press Use to assign, or ✕ to leave it unassigned. Nothing is assigned until you say so.
If more than one person could be meant — two Alexes on the board — it says so and offers the choice instead of picking one.
It only suggests people from the board that task is going to, and only ones you can already see. A task going to your own list has nobody to suggest, so it stays an ordinary unassigned task.
Being mentioned is not the same as owning it. "John needs to send the report" suggests John; "Ask John about the project" does not, because the asking is yours to do.
AI features
Several buttons call an AI service: summarize a note, find action items, reformat text, turn an email into a task, match an assignee, draft a follow-up email, summarize a board, and work out which column is which when you import a spreadsheet.
These need your own API key
Open Settings → AI and paste one from console.anthropic.com. The key is stored with your account. Most requests are sent from your browser, but Week Agenda, emailed-task processing, Ask STRIDE and ChatGPT requests go through STRIDE’s server, which reads your key for that request. Usage is billed to your account, so treat the key like a password — anyone who can get into your account can read it. It is not written into the files you export; see taking a copy of your work.
Clearing AI recommendations from a note
Two buttons under the found action items: Read it again re-runs it, Clear empties the list. Clear does not delete anything you have made. Any task already made from a suggestion is kept, and so is anything you have moved out of the parking lot. Only a suggestion still sitting in the parking lot goes with the clear, same for Remove the suggestion on a single item.
Choosing an AI provider
Settings → AI provider chooses which service answers. Each provider needs its own key, and switching does not carry one across — keys are never sent to a service they do not belong to.
| Provider | Status |
|---|---|
| Claude (Anthropic) | Available. The default, and what every AI feature has always used. |
| OpenAI (ChatGPT) | Available as an opt-in. Choose it and add your own OpenAI key. See below. |
How ChatGPT works here
OpenAI's API refuses to answer a web page directly, so ChatGPT requests go through STRIDE's server instead, still on your own key, which the server reads for that one request and never stores. Your OpenAI account needs API credit — a ChatGPT subscription does not include it — and an account with none is told so rather than asked to try again. Claude stays the default; nobody is moved to ChatGPT unless they choose it.
Tasks by Email works with either provider: the AI summary of an email you send to your Tasks by Email address runs on Claude or ChatGPT, whichever you have chosen. With ChatGPT selected, it goes through STRIDE's server on your own key.
When your Organization provides the key
If an Organization Owner has set an organization AI key, Settings → AI shows Provided by your organization and names the provider, Claude (Anthropic) or ChatGPT (OpenAI). Every AI feature works with no key of your own, and no “add your key” prompt appears anywhere. Any key you had saved is put aside for 30 days and returned if the organization key is turned off in that time. Requests go through STRIDE’s server, and your organization can see how many requests each person makes. Test the connection still works. If the key is refused you are told an organization owner can fix it in Organization settings → Organization; there is nothing for you to change. How an owner sets it up: One AI key for the whole Organization.
Seeing what is configured
The picker marks each provider that already has a key, and says whether the
selected one is Configured ✓ or Not configured. A
saved key is never shown back in full, only its last four characters
(Saved: ••••••••9f2c). Each provider keeps its own key; switching between
them never deletes the other, and Clear removes only the selected one.
Checking your key works
Press Test connection after saving a key. It makes one small request: Claude answered (works), That API key was rejected (wrong, expired or revoked), Too many requests (rate limited, retry), or Unavailable right now (provider trouble). It tests the saved key, not one just typed into the box.
What gets sent
Only what the feature needs, and only to the provider you selected:
| Feature | What leaves your browser |
|---|---|
| Summarize a note / find action items | The note's text |
| Format text | The text being formatted |
| Turn an email into a task | The email you pasted |
| Find assignees | The note text and the first names on the board |
| Draft a follow-up or reply | Your notes (up to 20,000 characters), the name or names you give for To, the task's title, and up to 2,000 characters of the latest email on it with who sent it and its subject. Revise the draft sends your current paragraphs (up to 20,000) and your instruction |
| Board summary | Task titles, statuses and dates from that board |
| Import a spreadsheet | Your column headings and up to five sample rows |
Long text is shortened before it is sent. The spreadsheet importer is the strictest: it sends headings and a handful of rows, never the whole file, and never the contents of a free-text column.
Comments, mentions and messages
Every task has comments. Type @ in one to mention anybody on the teams of the boards this task is on — not just the people on this board, and not people from your other teams — and they get it in their Messages panel, with a count on the button. Start typing a name and the list narrows; arrow keys move, Enter picks.
The comment box is at the top of the Comments section. Type at the top; newest first; scroll down for older. The thread opens at the newest comment, and a comment you post appears first.
Opening a mention on a board you are not on opens the task itself, if you can see it, instead of telling you that you are not a member.
The comment box has formatting controls above it — bold, italic, underline, strikethrough, lists, size, color, highlight, a link, clear formatting and undo, the same bar the note editor uses, cut down. Narrow the box and whatever does not fit moves under ….
Three chips above an empty comment box offer a starting sentence you can edit before posting: Status update…, Question… and Where are we…, which drops in a request for whoever is assigned to say where the task stands. Pressing one fills the box; nothing is posted until you do.
Formatting is optional and nothing already written has changed — plain typing still posts as plain text, and text that only looks like a tag is shown as the characters you typed. @ still mentions somebody, formatted or not: the name is looked for in the words you wrote, never in the formatting around them.
Tidying a comment's layout with AI
Tidy formatting with AI is at the end of the formatting bar: it lays out your draft better — paragraphs, a list, a heading — and changes no word of it. It is a single Undo step. Every @mention is hidden behind a placeholder before the draft is sent and restored afterwards, so no colleague name reaches the provider; if a mention could not be hidden, the request is not made at all. It appears wherever an AI assistant is configured, and is absent otherwise.
It is not the same as Format and Bullets
The team board's comment box also offers Format and Bullets. Those rewrite: they send your prose, get prose back, and show it with Use this before replacing anything. Tidy formatting with AI changes no word, only the shape. See tidying a comment up.
Reacting to a comment
Under every comment is a quiet row of three reactions: 🙌 High five, 👍 Thumbs up and ❤️ Heart. Use one to show you have read a comment without writing a reply. The reaction stays with that comment.
- You have one reaction per comment. Press a different one to switch; press the one you chose to take it back.
- Anybody who can read a comment can react to it. You cannot react to your own comment, or to a line the system wrote.
- A reaction notifies nobody: no email, no Messages entry, no badge for anyone else. The author sees it on the comment the next time they open the thread. For you it counts as reading: the comment you react to, and every comment before it in the thread, are marked read (its New flag, the unread chip and your Messages row clear). Newer comments stay unread. Taking a reaction back does not make anything unread; use Mark unread for that.
- A reaction survives the comment being edited. It goes when the comment is deleted, and when the account that reacted is deleted.
Deleting a comment asks Delete your comment? first, and says it cannot be undone. A long web address in a comment is shortened to one line on screen; hover it to read the full address. The link still opens the whole address.
A task comment's Make a task action creates a task from that comment. Hover it and it reads Create a task from this comment.
Threads: conversations that have moved on
Press Reply on a comment and it links your comment to theirs; the conversation becomes a thread. The point is that you stop having to remember. If you were mentioned in it, or wrote in it, a later reply comes back to you in Messages under Threads. Nobody has to @ you again for you to hear about it.
The Messages panel has four tabs: Unread — new direct notifications; Threads — conversations you are part of that have new replies; Watching — changes to tasks you follow; and All. It opens on whichever matters most: Threads if a conversation has new replies, then Unread, then Watching, otherwise All — until you pick a tab yourself.
The Threads count is conversations, not replies. Press Read to open and mark it read for you alone; a new reply makes it unread again, and you are never notified about your own reply. Threads work the same on a task in Tasks, the same task on a team board, and a shared note — it is one conversation whichever screen you are on.
Updates on tasks you watch
Watching carries changes to a task you asked about changing. Each row names who changed it and what they did — commented, changed the status to Blocked, moved the due date, reassigned, marked complete, edited the description — with the task, board and team. A comment row quotes a line of it; other changes just state the fact, since the line already says the whole thing.
Several small changes to one task in quick succession fold into one row (a comment always gets its own row); where a God Mode holder has turned it on, a repeat of the same update, further apart, is folded too, with the rest counted rather than re-listed. A folded item is still unread until you actually open it — nothing is deleted and nothing is marked read for you.
Opening it lands you on the thing that changed — a comment scrolled to and highlighted, anything else the task editor's main page, switching team and board for you. Reply opens the task's own conversation, since the answer belongs in the discussion, not in the Messages panel. The count is updates, not tasks — but a single stretch of editing is one update, not one per keystroke.
Your own changes never appear here — and that is not a fault
Watching tells you what other people do to a task. Comment on, or change, a task you watch yourself and nothing appears here — same rule that keeps your own replies out of Threads. The empty tab says so: under Nothing has moved, “You are watching 3 tasks. Nobody else has changed them yet.”
These updates count towards the number on the messages bell and appear in All too. Read, opening the task, or Mark all as read clears them. Mark all as read says Marking all as read… beside the button while it works, then All caught up.; if it cannot finish, it says so and leaves the list as it was. Losing access to the board ends it — watching never widens what you can see.
Every comment can be linked to. Copy link copies an address that opens the task on its board, scrolled to that comment. A personal task on no board has no Copy link, since only you could open it.
Who you can mention, and what a mention gives them
You can mention the people on the teams this task belongs to, and nobody else — enforced by the database, not the list. It is the task's teams, not yours.
A task that is on no board has nobody to mention, since nobody else can see it or its comments; typing @ there says so rather than doing nothing. For a moment after you open a task the list may say it is still working out who can be mentioned; it fills itself in without you retyping.
Mentioning somebody does not give them access to anything. If they are not on the board, they still get the message and can read the comment that names them, but opening the board tells them they are not a member. Add them to it in Team settings → People to actually give them access.
You can reply without leaving the panel. A message you can write back to has a Reply button, posting straight into the same conversation — as an answer to the comment that named you, or to the newest message in a thread. Typing @ there offers the people on that item. Replying also marks the message read. The reply box has the same formatting controls above it as any comment box, including Tidy formatting with AI — see tidying a comment's layout with AI. Cancel or Escape gets you out of it — Nothing is sent until you press Reply.
The Watching tab is the exception: those rows have no reply box at all. Reply opens the task's own conversation instead, because an answer about a task belongs where the people working on it will see it. A conversation you were only mentioned into, on a board you are not a member of, shows Read and View task with no Reply, because the panel does not offer a button the board would refuse.
It is the same panel here and on the team board — the same list and read state, so clearing a message in one clears it in both.
View task opens the task in a floating editor over Messages. Closing it returns you to the same place in your messages.
Asking several people for an update at once
Bulk comment, under Actions on the On team boards and Watching tabs, nudges everyone behind your overdue work in one pass. Tick the tasks, write one message, send: STRIDE posts it as a separate comment on every ticked task, automatically @mentioning the assignee (or the owner if none). A task with neither is grayed out and cannot be ticked.
The dialog states what Send will do — “This will post 9 comments and send 9 email notifications” — updating as you tick rows, and marks a task you have already followed up with a green check and “Followed up 5m ago”. Select all skips those tasks; you can still tick one by hand to chase it again.
When you press Send, a summary appears at the top of the dialog — “Comment posted on 7 tasks.” Each task that went through shows a green check and “Posted just now” and can no longer be ticked, the message box is cleared, and Send becomes Done, so the same comment cannot go out twice. If something cannot be posted, the summary says how many went through and names the one that did not and why; those tasks stay ticked and your message is kept so you can press Send again for just them.
Finding duplicate tasks
Find duplicate tasks…, under Actions beside the tabs or in the AI Assistant menu in the top bar, asks your AI assistant to look across your open tasks on My tasks, Watching and On team boards for ones that describe the same work — “Product pages on Atlas” and “Product Pages on Atlas – create in Beacon?”, say. It appears once you have set up an AI assistant in Settings; the AI capabilities list calls it Find and merge duplicate tasks.
Press Scan. The assistant reads each task's title, the start of its description, its due date and its board name, on your own API key. That includes colleagues' tasks: ones on your boards, ones assigned to you, and ones you watch or collaborate on. It only suggests groups; it never decides what happens to a task.
Each group is headed Group 1 of 4 · 3 tasks, with the assistant’s reason beside an AI mark; a line above counts the groups left, done and skipped (none found says No likely duplicates among these). Each task is a card, as in Merge two tasks: where it lives, its due date and its steps, comments and files, plus why it cannot merge in that group, if it cannot. STRIDE ticks nothing for you.
Merge two of them. Drag one card onto another in the same group and hold, or press Merge with… in its … menu (or M on a focused card; with more than two, a picker of the group's other tasks comes first). You get the same Merge these two tasks? question as everywhere: Keeps going and Completed and linked, ⇄ to swap and, with your AI Assistant on, an AI suggestion. Merge brings the description, steps, tags, links and watchers across; the other task is completed and linked, never deleted, and the kept task’s due date and assignee stay (the merged card notes any difference). Repeat until the group is one task: it collapses to Done. Undo on the most recent merged card, or on a done group (all its merges, last first), works while the dialog is open, beside the usual Undo notice.
Not a duplicate takes a task out of its group (the ⊗ on its card, or in its menu); nothing happens to it, it shows as Taken out with Put back, and a group left with one task is done. Skip group sets a group aside; Show again brings it back. Neither is remembered.
Or remove one. A card’s … menu also has a removal named for what it does; it asks you to confirm, naming the task, and reports the result on the card. The last task in a group never offers one. STRIDE decides what a task gets from who it belongs to:
- Delete… — a personal task you own. A deleted task cannot be restored.
- Archive as duplicate… — a team task; it is archived, not deleted, and the comment “Archived as duplicate” is posted on it as you; anyone on the board can restore it from the board's Archived view.
- Hand back… — somebody else's task assigned to you; it goes back to its owner, who keeps it.
- Stop watching… — a task you only watch; the owner keeps it.
To check before you decide, press the Task chip on any card — it reads “Task · <date>”, or “Team Task · <date>” for a board task (Complete in place of the date once it is finished), colored by when it is due, exactly like the chips on a checklist. The task opens in its editor over the list; close it and you are back where you were. If you changed the task, its card updates.
A task you cannot remove — a team task you are not on the board for, or one you collaborate on — has no removal in its menu; it can still be merged where Merge two tasks allows, or taken out of the group.
Everything in this dialog takes effect when you press it, so the button at the bottom reads Close, not Cancel, and so do the × and Esc. Groups you have not touched are left as they are. Once every group is done or skipped, Scan again appears beside it.
A deleted task cannot be restored. If the assistant's reply cannot be read, nothing is changed and you can press Scan again. A very long list is checked in several requests, and the dialog says so before you scan — two copies that land in different requests are not compared.
Keeping a board task off this list
A task on a team board that you own has a Show in my tasks tick box under Board & Events. Turn it off and the task leaves this list immediately — not deleted, still on its board, findable in the team app under Owned tasks.
It never hides a task from the person doing it
This is your own list and nobody else's. If the task is assigned to somebody, they still see it in theirs. Assigning a task you own to somebody else moves it off this list: a team task appears under On team boards (see Handing a task to someone else).
Opening the same task on its team board
When a task is on a team board, Team Task appears under its title and opens the team app on that board with that task already open — same task, not a copy. Absent for a task not on a board, or one you've lost access to. The team board has the reverse: My Task, on any task in your own list.
Default team
Your default team is where a new browsing session starts. Set it in Settings → Preferences → Default team, or in the suite under Settings → Workspace → Where you work — one setting, two doorways.
A page opens on, in order: a team you have already been on in this browsing session wins; otherwise your default team; otherwise you are asked (the team board and OKR page fall back to a team you belong to instead). Switching team never changes the default — a visit is not a preference. A task on a team board always opens on that board, whatever the default says.
Writing a comment from an email
From email… under the comment box opens a box to paste an email into. The assistant writes a compact summary — one sentence, up to three bullets — with a line above giving the date, sender and subject read out of the email itself (or date not stated in the email if absent). The draft lands in the comment box for you to edit before posting.
Comments waiting to be read
A task somebody else has commented on highlights the comment count on its card. The Comments tab itself stays plain — the number in its label (Comments (3)) is what tells you there are any. Mark all read and Mark unread are in the ••• menu (Conversation options) beside the sort button, which shows a blue dot while something is new; posting a comment, or moving to a task's Comments tab, marks its comments read. The comment box folds to one Add a comment… row when the task already has comments: press it, or just start typing, to open it. Your draft stays while it is folded, and the row then reads Draft · followed by its first words. Read state is shared with the team board.
All of it is described in full under Comments, mentions and attachments.
Who can open the note you are looking at
Beside the note's title is a small chip: Private, or Shared with 2 people. Hover it to see who, and — if the note is yours — click it to change who can open it. On a note shared with you it reads Shared with you, a label rather than a button.
Notes are private until you share them
A note belongs to you. Nobody on your team can see it, search it or stumble into it — not an administrator either — until you add named people to it yourself. Sharing is always to people you choose, never to a whole team.
Sharing a note with someone (note collaborators)
Open the note and press the share button beside the title (the three connected dots). Search for someone by name or email, tick as many as you want, and press Done.
Someone you share with can read it, edit the text, use the checklist and comment. They cannot delete the note, delete the checklist, change who else it is shared with, or take it over — those stay with you as owner, enforced by the database.
Notes others have shared with you appear in a Shared notes section at the top of your list — not one of your groups, and only shown when something is actually shared with you. Your own shared notes stay in their group, marked Shared.
Following a link to a shared note
A note-share notification points at the note itself. Signed in, it opens straight away; signed out, signing in takes you straight to the note — you do not land in Tasks or anywhere else first. If the link names a note you cannot open (deleted, or removed from its share list), Notes says so.
Who owns a note somebody shared with you
Every note in Shared with you says whose it is: Owned by: their name and email, under the title. If Notes cannot place the owner, it says Owned by: Unknown owner rather than guessing. The line never appears on your own notes.
To stop sharing, press the ✕ next to somebody's name under the title, or Remove in the share dialog. They lose access straight away; anything they wrote stays.
Two people in the same note at once
Shared notes are built for this. If somebody else saves the note while you have it open, the app merges their changes with yours and saves both — you do not have to refresh. Different parts of the note are simply combined; if you both typed in the same paragraph, both sets of words are kept, the way live editing keeps them. If one of you deleted a checklist item or a page the other was editing, it is kept, so nothing anyone typed is lost.
When your changes are refused, and how to get them back
Only a change that cannot be merged is refused: you and a colleague changed the same setting of the note (its summary, its tags, its action items, or the status of the same checklist item) to different things, or several people kept saving faster than your change could be merged in. Then a red panel appears at the top of the note: “This note changed while you were writing”, and the save marker stops saying Saving… and says Not saved instead. Your words stay on screen, nothing is lost. The refusal happens in the database itself, so it holds even if you both save in the same second.
Press Refresh this note to read their version. Your own is not thrown away — an amber panel takes the red one's place saying “Your unsaved version is still here”, with Show what you wrote and three choices: Put my version back (replaces what they wrote), Copy my version (clipboard, to merge by hand), or Discard mine — throws your version away, and it asks first, because nothing else holds a copy. Your unsaved version survives closing the tab, but is gone at your next sign-in.
A colleague’s save shows up in the open note by itself when your organization has live editing on: the note checks every few seconds anyway, and merges a newer version in place without moving your cursor. With live editing off it is merged in at your next save, or when you refresh. See also Working on a task together and the Notes manual.
A task made from a shared note belongs to whoever made it. If a colleague turns a checklist item into a task, that is their task, not yours, marked with their name. Nobody can make a second task from an item that already became one, so you will not end up with two.
Opening a task that a shared note links to
A note can point at a task that already exists, in its Related tasks panel or a linked checklist item. When you open a note shared with you, any task linked inside it appears there, and you can open and read it even though it is not yours and not on your own list.
It is reading, and only reading. You cannot change, complete or comment on the task, and you are not added to it.
This access is not stored anywhere — no membership, no role. It is worked out fresh every time you look, so it stops the moment any of these happens, with nothing left behind:
- the note is unshared with you, or deleted;
- the task is unlinked from the note;
- the task's owner leaves the note;
- you or the task's owner leaves the organization;
- your account is deactivated.
Take the note away and the task access goes with it. What you get: the task itself; any file uploaded to that task becomes downloadable to you too, though you cannot add or remove one yourself — and if you share a note, its linked tasks' files travel with it; the discussion on the task is readable too — you can read the comments. You cannot add one. So reading the thread is not joining it (the task's owner or a collaborator can add you as one if you need to); and its collaborator list.
When the link stays closed — no error, just nothing shown: the task's owner must also be on the note (own it or be shared it too), and you and the task's owner must be in the same organization.
You do not have to wait for a collision to ask. Re-read this note, on the open note's ••• menu in the notes list, re-reads that one note from the server without disturbing anything else you have open; anything you have typed is kept and offered back to you if it differs from what comes down. The page header's Refresh is the bigger hammer, re-reading everything.
Deleted-item log entries on a note are kept for 90 days and then tidied away. Comments are kept for as long as the note is.
Working on a task together
A task’s checklist and comments go live when somebody else can see it: a team board, an assignee or a collaborator. A task only you can see saves as it always has.
In the task drawer and the team task pop-up, the checklist updates as colleagues add, type or move items, and comments appear without a reload. An N new comments button says how many arrived if you have scrolled up. Tasks show no named cursors.
Beside the save status, in the header, the drawer shows a Live editing ready, Live · 2 here or Live editing off label, and so does the team task pop-up. Live editing ready, in plain gray, means live editing is available here, and it starts only while someone else has the same task open; then the label turns blue and glows, reads Live · 2 here, and colleagues see checklist changes and new comments as they happen. Off means your organization (or one the task is shared with) has not switched live editing on, or it has been turned off across STRIDE: press the label for the reason. Either way, changes save as usual and appear for others when they reopen or refresh. To get it turned on, ask an organization owner, who switches it in Team settings → Organization. A task only you can see has no label.
Live editing starts when a second person opens the same item. Press Live editing ready to check now instead of waiting: if someone else has it open, you go live straight away; if not, it says Just you here. Nothing opens while you are alone. Organization owners find Live editing settings… under the small arrow beside the label. If someone else has the task open but your browser cannot open the live connection, the label turns amber and reads Live editing can’t connect: your changes still save, it keeps trying while they are there, and pressing the label tries again now. A comment a colleague posts while your connection was down, or while the tab was in the background, appears when the connection comes back or you return to the tab. If you are removed from a task while it is open, live editing on it stops within about a minute.
Tasks other people can change
Most of your tasks are yours alone. Some are not: a task on a team board can be edited by anyone on that board, and tasks assigned to you appear here even though somebody else created them.
For those, the app sends only the fields you actually changed — so if you change the due date while a colleague changes the description, both are kept. If you both change the same thing, the later save is refused rather than overwriting theirs, and you are told — which is the protection that matters, because it fires at the moment your work would otherwise be lost.
Your task board does not poll for changes. It re-reads when you come back to the tab after being away, and once a day. Board tasks are edited on the team board, which does keep itself current, and the task you have open is never rewritten while you are in it. A background repaint of every card is what made clicks occasionally do nothing, so it was taken out.
Closing the editor waits while a change is still saving. If you close the task editor (the full view over your list) while something you just did is still on its way to the database — a checklist item, a new assignee, taking a task off your list — it stays open for that moment with Saving… beside its close button, and closes by itself once the change has landed. If nothing is on its way — the editor is only still loading — it closes at once. If a change could not be saved, it stays open and says Not saved — Close again to close anyway: check the task, or press close again if you would rather leave it.
“Your change wasn’t saved” means the task you changed had already been changed somewhere else first — in another tab, another window, or the editor — and your change was refused so that the newer one was not overwritten. The message names the task. Reload shows you its current version, after which you can make your change again; Not now closes the message and leaves the page as it is.
Handing a task to someone else
Any task — personal or on a team board — can be handed to a colleague. Open it and look for Assignee: type a few letters of their name and pick them from the list that appears. From then on they see the task in their own task list, are told about it in their Messages, and get an email the first time it happens.
If somebody hands you a task they own, the edit panel says Assigned to you by and their name beneath Assignee, so you can see who gave it to you.
When you assign a task you own to someone else, it leaves My tasks and appears under Watching (a team task appears under On team boards, the tab for work of yours that is out on a board). You keep getting its updates. Assign it back to yourself, or clear the assignee, and it returns to My tasks. The row on Watching reads You assigned it to NAME, and the message after assigning names where the task went. Tasks assigned before this change stay where they were.
It happens on every way of assigning: the Tasks drawer, the full task editor, the phone's assignee sheet, Make a task from an event, the board's task dialog, and the checklist avatar. It also applies to tasks created by import or by AI that name someone else as assignee, unless the file sets Show in my tasks itself.
Only you move your own task. If somebody else changes it (for example a board admin removes the assignee) your list is left as it was. You can always put it back with the Show in my tasks slider in the drawer. A task is never on both lists.
A personal task handed back to you comes back to your My tasks. If the person you assigned it to assigns it back to you, it returns to your My tasks, whatever your Show in my tasks slider said. This is the one change somebody else can make that moves your list, and only on a personal task; a team board task you hold is on your My tasks anyway.
A personal task always has an assignee. A task you create is assigned to you to begin with, and its Assignee list has no Unassigned choice — you can hand it to a colleague or take it back, but not leave it to nobody. A task on a team board can still be left Unassigned.
An assignee is always a person with an account
Assignee is now always a person with an account you pick, not typed text — it used to be a plain text box you could type any name into. If somebody has no account, they can no longer be picked; invite them first, or just name them in the description. On a team board they can still appear in the list grayed out if the board added them by email and they have never signed in.
The task's owner can change who it is assigned to, and so can anybody on a team board the task is on, matching every other field on that board. On a personal task (one on no board), it stays the owner's alone until somebody is assigned — once a task is assigned to you, you can change it too: pick somebody else to hand it on, or pick the owner to hand it back. Whoever the task is handed to sees the picker and a plain sentence naming who assigned it to them. Anybody else who cannot change it sees who it is for, grayed out.
The list offers the people you share a team with. On a board it offers the board's own people first and then the rest of your team, marked as not being on this board — and picking one of those asks whether to give them access before it assigns anything, because somebody who cannot open the board would never see the task.
Handing a personal task over this way never puts it on a team board. It stays a personal task, visible only to you and the one colleague you handed it to, and you can take it back at any time by setting Assignee back to yourself.
The person it was handed to can work the task — change its title, due date, checklist, comments, anything on it — and hand it on to somebody else or take it back off themselves and give it to you. They can also make themselves, or somebody else, its owner (below). What they still cannot do is put it on a board: on a personal task, only the owner can; on a team board, anybody else on that board can too, the same as for any other field.
The handover itself appears as a comment on the task, marked System rather than credited to whoever assigned it — nobody typed it, so it cannot be edited or deleted, though anybody in the conversation can still reply to it.
You cannot turn this off
Putting a task on somebody's list this way always shows it to them and always tells them — there is no setting, for you or for them, that hides an assigned task from the person it was assigned to. If you want them to stop seeing it, take it back with Assignee rather than looking for a way to hide it. A colleague may suddenly see older work of yours appear in their tasks the first time an old, name-only assignment is finally matched to their account.
Changing who owns a personal task
On a personal task, the Owner is the person the task belongs to. Its owner, the person it is assigned to, or anybody added to it can pick a new Owner from the list, and the task then belongs to that person: it is theirs to keep, edit and delete, exactly as if they had created it. You can pick anybody you share a team with, including yourself.
- If you own a personal task, its assignee or anybody added to it can make themselves its owner.
- The previous owner is added to it as a collaborator, so they can still open it and work on it (and can take themselves off), and they keep watching it.
- If the previous owner was also its assignee (a personal task is assigned to its owner unless you hand it to somebody), the assignment moves too: the task goes onto the new owner's My tasks.
- If somebody else is assigned it, they keep it, and it goes onto the new owner's Watching list rather than their My tasks, the same as when you assign one of your own tasks to a colleague. Assign it to the new owner and it is on their My tasks.
- If you give it away, it moves to your Watching, where you can still work on it.
- A name with no account stays a label on the task and does not change who it belongs to.
- In the full task editor the Owner is a text box: type a teammate's name exactly as it appears in the list and press Enter or leave the box. On the phone, pick them under Owner and press Save; saving other changes leaves the owner alone.
- You can only pick somebody who has signed in to STRIDE at least once.
A task on a team board changes owner on the board instead.
Keeping one of your own tasks off your list
Own a task and you will see Show in my tasks directly under Draft follow-up… in the edit panel on the left, ticked by default. Open the same task in the full task editor and it is there too, under Owner. It is the same control a task on a team board has always had, working the same way: untick it and the task leaves your own list without being deleted, archived or handed to anybody. This is the quick way to clear something you have put on a board or handed to a colleague out of your own day-to-day list. On a task on a team board that you own and are also assigned, the switch is grayed out and says why — You own and are assigned this task, so it is always in My tasks — because an assigned task is always on its assignee's list. A board task you had already turned off stays switchable, so you can put it back. On your own personal tasks the switch keeps working. Handing one to somebody else leaves your list for Watching, as Handing a task to someone else describes. One exception: a task that arrived by email and is still waiting on your Emailed tab does not offer it yet — nothing on that tab is on your list yet, so there is nothing to keep off it. Press Accept and the control appears with it, ticked.
Every change offers Undo. Turning Show in my tasks on or off raises the same small notice as other task changes, with an Undo button (or Ctrl/Cmd+Z) for a few seconds. Undo puts the previous choice back, and reopens the task if it was the one open.
The edit panel stays open when you untick it. The task leaves My tasks and moves to Watching, but the panel (and the full editor) stays on that same task, so you can keep editing it; later changes save as usual.
It moves to Watching instead of disappearing. A task you own but have turned this off for still needs somewhere you will see it move, so it appears on your own Watching tab, and it still counts towards that tab's late badge if it falls overdue. Open Watching and the row says exactly why it is there: Owned but opt’d to watch only — so it never reads as a stray task you cannot place.
A task that is on a team board goes somewhere else, because it already has somewhere to be. It does not move to Watching; it stays on its board, it stays in Owned tasks on boards in the team app, and on this page you will find it under the On team boards tab — which is exactly what that tab is: your tasks that are on a board but not on your own list.
How to put a task back on your list
Open the task from whichever tab it is on and tick Show in my tasks again — on the panel for one that moved to Watching, or in the drawer's Where it lives tab for one on a team board. Either way it returns to your list straight away and leaves the tab it was on.
This is for work you are driving but do not need cluttering your day-to-day list — you created it and assigned it out, say, and want to know if it goes quiet without it sitting among the tasks you are actually working. It is exactly the case a team task's owner has always had a way to handle; a personal task now has the same way.
The assignee always sees it, whatever you choose
This setting is about your own list, as the row owner. If you have also handed the task to somebody else, it is in their list regardless of what you tick here — there is no way to keep a task off the list of the person it is actually assigned to, on a personal task any more than on a team one. The control only has anything to say about your own copy of the task.
The owner and any collaborator on the task each see their own copy of this control — see below for a collaborator's own version of it. Handing the task to a new owner does not carry your choice with it — a new owner starts ticked, the same as on a team board.
Keeping a task you collaborate on off your list
Being added as a Collaborator on somebody else's task gives you the same Show in my tasks control the owner has — your own copy of it, answering a different question (whether YOU want this on YOUR list, never the owner's own choice about theirs). It shows up the same way, under Collaborators in the edit panel and the full task editor, ticked by default. Several tasks you are only collaborating on can otherwise crowd a list you are supposed to be driving yourself; untick it for any of them and it comes off your My tasks list without being deleted, archived, or taken away from anybody else who can see it.
It always moves to Watching — a collaborator has no Owned tasks on boards list of their own to fall back to, board task or not, so Watching is always where it goes. The row there says why: You are a collaborator. Bring it back the same way an owner would: open it from Watching and tick Show in my tasks again.
Collaborators: giving someone else full access to a task
Open any task you own and look beside Owner and Assignee for Collaborators. Press the gray circle with a person outline at the end of the row, search for people in your organization, and tick as many as you want — the same picker you use to add people to a note or share something on a team board.
A collaborator gets the assignee's own reach. They can read the task, change anything on it, and comment — exactly as if the task had been assigned to them. A collaborator can also add and remove collaborators and reassign the task, to somebody they share a team with (on a team board task, somebody on that board), and on a personal task make somebody its new owner (Changing who owns a personal task). What they cannot do is delete the task or put it on a board: those stay with you, the owner.
Adding somebody is what makes the task visible to them at all — a personal task is otherwise yours alone to see. Doing so automatically starts them watching the task, with email on, so it reaches them through their Watching tab, not their My tasks list — not added to their own day's work, but somewhere they will see it and hear about what happens on it from then on, with full access to open it, change it and comment.
You, the owner, the person the task is assigned to, and any collaborator can add or remove collaborators, including people somebody else added. On a team board task, its assignee is not included: the board's own rules decide. Nobody can add themselves as a collaborator, and someone who is not the owner can add only people in their own organization as well as the owner's. On a task where you cannot, the gray circle is dimmed and a line beside it names who can, so ask them to add you or anyone else. Anybody added has to be an active member of the owner's organization, and being on one of its teams counts; the picker lists everyone who qualifies, however large the organization. Somebody who has since left keeps whatever they already had access to until you remove them, or they can step off the task themselves at any time. Removing somebody is posted to the task's updates, the same way adding them is. Removing somebody ends their access at once — they can no longer open the task at all, even on a day they were still watching it.
You can @mention a collaborator the same way you already mention an assignee — typing @ in a comment offers them alongside everyone else who can see the task, from the moment you add them — there is no need to close and reopen the task first.
The same word in two places, and only one of them grants access
A team board task also has a field called Collaborators, and it is not this one. The board's field is a plain record of who is involved — useful for deciding who to email — and it does not grant anyone access on its own. The Collaborators field on a personal task, described above, is the opposite: a real grant of access, scoped to your organization rather than to one board. Each field says which it is when you open its picker.
The two lists are independent. Adding somebody on one does not change or replace the other, and a task can carry both.
Commenting on a note, and @mentioning people
A shared note has a Comments section above the note body. It works exactly like comments on a task — the same box with the same formatting controls above it, the same @, and the same Reply, Edit and Delete. You can only edit or delete your own comments.
Typing @ offers the people this note is shared with, and nobody else. Mentioning someone puts the note in their Messages — the same Message Center that carries task mentions, with the same unread count. There is no separate inbox for notes. Opening the message takes them straight to the note with the comment highlighted.
If a task or a checklist item is deleted off a shared note, the note gets a comment saying what was removed and who removed it. That only happens on shared notes: on a note nobody else can see there is nobody to tell.
Checklists: capturing a meeting as it happens
A note can carry one checklist — a fast way to jot down what comes up in a 1:1 or a working session without stopping to decide a due date, an owner or a board. Press + Checklist at the top of an open note and it appears, ready to type into.
It has five categories and they never change: To-do, In progress, On hold, Complete and Parking lot. You cannot rename them, add your own or reorder them, and that is deliberate — a checklist you have to set up first is one you will not use mid-meeting. Parking lot is for the thing somebody raised that is not for today.
Type into any section and press Enter; the field stays where it is so you can keep going. Click an item's title or its description to edit it in place — Enter saves, Escape cancels, and Tab moves to the next field. The tick marks it complete and files it under Complete; the dropdown on the row moves it anywhere. Nothing is ever removed by completing it.
Each section folds on its own, and so does the whole panel. They are independent — opening one does not shut the others — and how you leave them is remembered against your account, so it follows you to another machine and changes nothing for anybody else.
Turning a checklist item into a task
A checklist item is deliberately not a task. It has words and a section, and that is all. When one turns out to be real work, press Make a task on the row. It creates one of your own tasks from the item's text, assigned to you; Make a team task creates one on a board. Either way you can then give it a due date, a board or a topic, and an assignee.
Afterwards the item shows a link to the task instead of the button. Clicking it opens the task. The checklist keeps only the link: the task is the real record, and editing it never means going back to the note.
Removing a checklist removes it and its items. It does not touch any task you already created from it, and it does not touch the note — the confirmation says so before you commit.
Folding the sections above a note
A note can carry three sections between its title and the text: the Checklist, Comments, and Tasks from this note. All three fold the same way — click the heading, with the small chevron in front of it, and the section closes to a single line that still shows its name and its count. Click it again to open it.
A section opens when it has something in it and shuts when it is empty. Open or close one yourself and that holds until you open another note or reload the page.
Tasks from this note appears only once Find tasks (or Link a task) has put something in it, and the These tasks are row above it appears only while something in that list still needs filing — it chooses where an item becomes a task, so once every item has been created or ticked off there is nothing left for it to decide.
Formatting a note, and tidying it with AI
Above the note sits the formatting bar: bold, italic, underline, bulleted and numbered lists, headings and quotes, text size, Color and highlight, typeface, alignment. On a narrow window the groups fold into a more menu. The same bar sits over a task's description on a team board — see formatting a task's description. The task editor you open from your own list has a shorter strip — bold, italic, underline, lists, indent — with its AI tidy button as a small icon.
Tidy formatting with AI is at the end of the formatting bar, after Undo and Redo: it lays the same words out better — headings, lists, spacing — preserving every fact, name, date, number and table exactly as written. It is one step: Undo brings your original back. It is there only with an AI assistant configured; absent otherwise.
Markdown shortcuts
Type a shortcut in the editor and it turns into formatting as you type. The shortcuts are the ones the More menu lists under Markdown shortcuts…:
| Type | You get |
|---|---|
# (hash, space) | Heading 1 |
## | Heading 2 |
### | Heading 3 |
- | Bulleted list |
1. | Numbered list |
> | Quote |
| three backticks, Enter | Code block |
--- then Enter | Divider |
**bold** | Bold |
*italic* | Italic |
~~strike~~ | Strikethrough |
`code` | Inline code |
[text](https://...) | Link |
Backspace straight after a shortcut undoes it. A backslash before a trigger types it
literally. Only # to ### make headings. [ ] does not make
a checkbox; use the checklist. Shortcuts do nothing inside code, a link or an @mention.
Pasting markdown text converts it in one step. Cmd/Ctrl+Shift+V pastes it exactly as it is. Turn it off in My Settings, Editor, Markdown shortcuts (on by default).
Lists work like Google Docs: Tab indents, Shift+Tab outdents, and Enter on an
empty item ends the list. Backspace at the start of an item removes the bullet first and joins the
line above on a second press. Markers change by level: disc, circle, square; then 1., a., i.
The Divider button (or --- then Enter) draws a line; Backspace next
to it selects it, and Backspace again deletes it.
Emoji: the smiley button opens a picker with Popular and Recent and a search
box. Or type : and two letters, such as :smi, to see matches; Enter or
Tab inserts, and Esc closes. The footer reads Up/Down choose, Enter or Tab insert, Esc keep
text. A time like 10:30 or a web address never triggers it. Emoji you paste from Slack, Outlook, Teams or a web page arrive as emoji, in color, wherever you paste them; a Slack custom emoji, which has no character of its own, stays as its :name:.
Links: hover or tab to a link and a small card shows the address with Open, Copy, Edit and Remove. Select text and press Cmd/Ctrl+K to add a link; Cmd/Ctrl-click opens a link. Only http and https addresses are allowed. In a read-only note or a comment the card only offers Open and Copy.
Folding the writing away
The formatting bar, Tidy formatting with AI and the writing box are one section, headed Note text. Press the heading to fold all three away, giving the room to the checklist and conversation underneath. A shut section still says what is in it: the shut heading carries a live word count, or Empty when there is nothing written. Nothing is lost while it is shut. Every character, your place in the text and the undo history all survive, and anything you had just typed is saved before the section closes — the note saves itself either way, there is no Save button waiting to be pressed behind a hidden editor. Whether you leave it folded is remembered with your account.
Giving the note more room: the resize grip
None of this divides a fixed share of the column with the note text above it: the writing box grows to fit what you have written — sizing itself to what you have written, not a fixed share of the column — and each section below (checklist, task list, comments) takes only the room its own content needs; nothing can grow into another section's space. The narrow gray bar just below the writing box is a resize grip: drag it down to give the note text a fixed height, or up to give that room back to the checklist, the task list and the comments below. From the keyboard, focus it and use arrow keys (Shift for a bigger step). Collapsing a section gives its own room back, with no drag needed — fold the checklist, the task list or the comments away and whatever was holding room for them stops. Double-click the grip, or press Home, to go back to auto-sizing. If everything needs more height than the column has, the column scrolls. The height you drag is remembered with your account.
A compact comment layout
Each posted comment puts the name, the time and its Reply, Edit and Delete links on one line, and the box you type into starts at one line with Post comment beside it. It grows as you write and then stops, so a long comment can be read back in full and Post never slides out of view. Nothing was removed — the section simply gives the space back to the note.
The formatting controls sit on the row above the box, and in a column this narrow most of them start folded under the … button rather than disappearing. Nothing the task composer offers is missing here.
Which side the note list sits on
The note list follows the same preference as the task editor: turn on Put the task editor on the right (calendar on the left) in Settings and the calendar moves left in Notes too, with the note list on the far right. Switching sides does not close what you have open — the note you are reading, where you had scrolled to and anything half-typed all stay exactly as they were.
Drag the divider to trade width between list and note: drag it towards the note to make the list wider, whichever side the list is on — or use the arrow keys if you would rather not drag; double-click for the standard width. The width you choose is remembered, including next time you sign in.
Choosing what the Notes page shows
Open Customize, the last button in the strip above the list. Under Layout, switch Show the list of notes and Show the side panel for this note on or off (the side panel can be turned off entirely, which takes the whole right-hand side away). Place the clocks, weather, month and quick links with the rail's ••• menu: Placement › Widgets: Beside / Below, or in Customize › Utilities, where Where the widgets sit offers the same choice. Hiding the whole panel is the › arrow at the top of the rail (it points at the edge the rail folds into), or Show the Utilities panel in the Utilities section of Customize.
Both choices are remembered with your account, and are particular to Notes — Tasks, the Calendar and the team board each keep their own answer; see choosing the widgets on each page. Notes settings… is in the page's Actions menu, under Page settings, and opens the Notes settings.
Side by side, you decide how the room is split. A divider sits between the note's own cards and the clocks, weather and month beside them — drag it or use arrow keys, Home or double-click to reset. Neither column can be squeezed away: the widgets keep at least 200px, the note's cards at least 240, so the divider stops rather than letting either one vanish. The width is remembered with your account, like the other boundaries on this page. On a narrow window the two columns stack instead, without rewriting your choice for a wider screen.
Notes Focused: one button instead of folding everything by hand
Focused sits on the notes strip's right-hand cluster, available only while a note is open. Press it and the note list, context pane, and the note's Checklist and Comments sections fold away in one move, giving the note body all the room.
It is not the same as the header's Focus control, which narrows every page to one tag; this one, spelled Focused and Notes-only, just rearranges this page.
Press it again and you get back exactly what you had, captured the moment you pressed the button. Opening any of the folded pieces by hand ends it; folding the note's own text away, or closing the note, ends it too, since the note is the one thing the mode exists to show. The setting is remembered with your account.
Working from an email: drafting a follow-up
Draft follow-up… sits directly under Assignee in the side drawer. On a task that arrived by email it is inside that message’s card, next to Read the email, in the side drawer, the full editor and on the team board. The full editor and the team board’s task also have the paper-plane Follow-up button in their header. Every one of them opens the same dialog, full size over the page, even when you start from the full editor. You say in a couple of sentences what the email is for, STRIDE writes it in your email style, you read and edit it, and you send it from Outlook yourself. Nothing is sent on your behalf.
The latest email decides the conversation. On a task that came from an email, the top of the dialog shows the latest email on the task (by the time it arrived), with Show email to read it and Earlier emails listing the rest. The draft replies to that one. Only the task’s owner can see the emails on it, so for anyone else the card says so and you type the To address yourself.
- Who is it to? This is filled in with the sender’s full name (the greeting uses the first name) when the task came from an email. Change it to the name you are writing to, or type several names separated by commas or and. The name becomes the greeting, and it is what STRIDE looks for when it fills in To.
- What do you want to say? Type a couple of sentences, or paste as much as 20,000 characters (nothing is cut), then press Draft (or Cmd/Ctrl-Enter). The box starts empty, and no tags are added for you. The assistant writes the paragraphs in your email style. STRIDE writes the greeting and Thanks,, and the result appears in Your reply. With no AI assistant the button reads Build email and uses your own words exactly as you typed them; after that it reads Build again, because no assistant drafts it.
- Choose what to include. Three chips above Your reply add or remove a
tag in the reply. Signature adds
[signature]after Thanks,. Email thread adds[email thread]at the bottom, below the signature. Checklist adds[checklist]where your cursor was in the reply, as its own paragraph; if you never placed the cursor it goes just above Thanks,. Press a chip again to remove its tag. Nothing is on by default, so there is no signature and no thread until you turn them on. A chip that cannot apply says why, for example No checklist on this task. Typing or deleting a tag by hand also turns its chip on or off. - Revise the draft. Under Revise the draft, the presets More concise, More collaborative, More firm and Warmer fill the instruction box. Add your own words too, such as “and add that Legal signed off on clause 4”, then press Redraft. Redraft changes only the paragraphs; the tags stay where they are, and your signature and thread stay as they were. Undo steps back one change at a time, up to 20 changes.
- Press Update reply. Each tag in Your reply is replaced by its content: the checklist as it is now, your signature as plain text, and the latest email quoted as Outlook quotes a reply. The button shows how many tags are waiting, and it is grayed out when there are none.
- Make your final edits, then copy or open. Copy text copies the text in the draft exactly as it stands, with no formatting and no To or Subject lines, as plain text, so it pastes into Outlook’s editor unformatted with Ctrl+V or ⌘V. Open in Outlook opens a new message in Outlook on the web with To, Subject and a plain-text body. Your signature’s text stays, but its links are left out, and it does not touch your clipboard. Both buttons run Update reply first if a tag is still in the reply, and the status line says so.
To, and a name in red. To is filled from the email thread: the address of the person named in Who is it to?, taken from the latest email’s sender, or from the headers quoted inside the thread. A line under To says where the address came from. An address from a quoted thread is marked check before sending, because the thread’s text was written by someone else. If no address is found, the name stays in red in the To field with a line saying so; type the address over it. If the thread has two addresses for the same name, the line offers a choice and STRIDE does not pick one for you. You add Cc by hand: a line under To lists the other people on the thread, each with + Cc, and Add Cc opens an empty Cc field. Open in Outlook fills To only when every name is an address. Typing in To or Cc suggests addresses you used before, from the second character, and Open in Outlook or Copy text saves the ones you typed to your address book.
Very long emails. If the quoted thread is too long for Outlook’s link, it is trimmed there, and the status line points you to Copy text, which has all of it.
Stopping Outlook’s own signature. In Outlook go to Settings → Account → Signatures and set For new messages to (no signature). While the Signature chip is on, the dialog shows this tip too.
Post to task as a comment, at the foot of the dialog, is off by default. Tick it before pressing Open in Outlook and the email you wrote is also saved as an ordinary comment under your name, headed Follow-up drafted…, to record that you followed up. The comment is without your signature and without the quoted email, which stays owner-only. It does not send anything.
With no AI assistant, the button reads Build email. It assembles the email from your own words exactly as typed, with the greeting and Thanks,, and makes no call to any model. Revise the draft needs an AI assistant; the chips, Update reply, To, Copy and Open in Outlook do not.
What goes to your assistant when you press Draft or Redraft: your notes, the name or names in Who is it to?, the task’s title, and the first 2,000 characters of the latest email with who sent it and its subject, which may include an address. Revise the draft also sends the current paragraphs of your reply and your instruction. The email text is treated as data, never as instructions to the assistant. It never receives your signature, the quoted thread, the text of your checklist or any address STRIDE looked up for To. Your signature comes from your email signature in Account, and STRIDE adds it itself.
It does not invent a recipient. On a task that arrived by email, To follows the name you write, which is the latest sender unless you name somebody else. On a task that did not, there is no email to read, so you type the address; the subject is Following up: and the task’s title.
Who the draft is addressed to
Draft follow-up… on a task that came from an email starts with the person you are writing back to in Who is it to?, so To is their address. STRIDE only accepts email you send it yourself, so that person is the one quoted in your email: the first sender in the quoted message who is not you. If you forwarded it into STRIDE, that means the person who originally wrote it — STRIDE reads them from the forwarded message — and the To line says From the forwarded email — check before sending. If you sent STRIDE your own reply, it is the person your reply quotes, and the To line says from the email quoted in your reply, check before sending, because that quoted header was written by someone else. The subject is Re: plus the original subject, without FW:. Change the name and To follows it, or type an address and Outlook opens with that address. If it does not look like an email address Outlook opens without one, so you add it there. If nobody but you is in the email (a forward with no readable sender, your own reply that quotes no one, or a note to yourself), the To line is left empty rather than addressed to you, and says why.
“Update from email” used to sit beside it and has been removed: mailing the task in does the same job in one step instead.
Drafting an email or a Slack message on the Compose page
You do not need a task to write an email. Press Compose in the top bar, after Notes, or press Create and choose Compose, or press E when no box is active; the Draft an email quick action does the same. Each opens the Compose page with an empty box. Compose is in the top bar on every page but the phone; it is not on the phone. (The page used to be called Email, and an old Email link still lands on it.) At the top of the write panel, Draft as switches between Email and Slack. STRIDE remembers your choice for you across sessions, and the Draft a Slack message quick action opens Compose in Slack mode. Everything below describes Email mode; Slack mode is described in the list that follows.
The write panel runs the full height of the page on the left: say who it is to in Who is it to?, type To, Cc and Subject if you know them, write a couple of sentences under What do you want to say?, and press Draft. The bar along the foot holds Track a follow-up, Restore last draft (only once you have one), New email, Copy text and Open in Outlook; each says what it did for two seconds (Copied, Opened in Outlook, Cleared, Restored). The draft is on the right, with the Subject and To above it. Drag the splitter between the two (its name is Resize the write panel) to widen or narrow the write panel, or double-click it to put it back; your width is kept for you across sessions. The utility rail on the right has its own divider, Resize the utility rail, that works the same way. Your assistant writes the paragraphs in your email style, suggests a subject and fills To from your address book, marked Suggested until you change it. A subject or To you type is never replaced. Begin your notes with a greeting on its own line, such as Justin, or Hi Justin,, and STRIDE fills Who is it to? from it (never over a name you typed), so the draft greets Justin and To looks him up. While it drafts, the STRIDE mark and a changing line show where the draft will appear. With no AI assistant the button reads Build email and uses your own words exactly as typed.
- Track a follow-up. Tick it, and choose Follow-up due (Tomorrow, End of week or Next week, which is the default), and the first time you press Open in Outlook or Copy text STRIDE also adds a task for you called Follow up: and the subject, with your email as its description (no signature). It is always your own personal task, even when you started from the team board. It is made once; a note beside the box and the status line say when, and the status line has an Open link.
- New email clears the page on the first press, and the button says Cleared. It never asks you to confirm: the email it cleared is kept as your last draft. Restore last draft appears beside New email, on its left, once you have cleared an email. Press it and the last draft comes back whole: To, Cc, subject, body, your notes and the Track choice. If an email is open when you press it, the two swap places, so press it again to swap back and nothing is lost. Only one last draft is kept, the most recent email you cleared. It survives a refresh, is cleared when you sign out or close the tab, and is never saved on STRIDE’s servers.
- Your draft survives a refresh. What you typed is kept for this browser tab, so a refresh or a stray click away does not lose it, and the page picks it up where you left off, with Start over to begin from nothing. It is cleared when you sign out or close the tab, and it is never saved on STRIDE’s servers.
- What goes to your assistant: your notes, the name or names in Who is it to?, your style guide, and, on Redraft, the current paragraphs and your instruction. No task title, no email, no signature, and no To or Cc address or address-book entry. An address you write inside your notes is sent as you wrote it.
- The addresses you typed are saved to your address book when you hand the email over. Slack mode never touches your address book.
- Slack mode. Choose Slack under Draft as and write what you want to say under What do you want to say?, naming who it is for in the note itself. The Who is it to?, To, Cc and Subject boxes, the signature chip, Copy text and Open in Outlook are hidden, because a chat message has none of them. Press Draft and your assistant writes one short message in your style, never more than two paragraphs: no greeting or sign-off line, no em dash, a few emoji at most (one for a sentence or two, up to three for a normal message, up to four for a long announcement, never stacked and never in the middle of a sentence), and no link or address you did not write. A quiet word count sits under it. Press Copy for Slack to copy it as plain text, with your line breaks and emoji, and paste it into Slack yourself: STRIDE never posts anything. The revise buttons are More concise, More collaborative, Lighter on emoji and Add a bit of context; each fills the instruction box and sends nothing until you press Redraft. With no AI assistant the button reads Build message and tidies your own words. Your notes are shared between the two modes, each mode keeps its own result and Undo, and New message clears the Slack result. Track a follow-up still works and adds a task called Follow up: Slack message. What goes to your assistant is your notes and your style guide (your name, title and organization), and, on Redraft, the current message and your instruction; no To or Cc, address book or signature.
Collapsing what you are not using
The full task editor groups its fields into sections: Details, Email, Board & Events, Checklist, Tags, OKR, Reminders and Attachments. Click a heading to fold one away and the description grows to fill the space. You do not have to fold anything yourself: when you open a task, every section that holds something opens and every empty one is already folded. Details is always open.
A folded section still tells you what is in it — Details collapses to a line like Active · Aug 28 · John Doe, Attachments to 3 files. A heading that glows blue holds something — Board & Events, Checklist, Tags, OKR, Reminders, Attachments and Email all light up once they have a configuration.
The same goes for team tasks. If something arrives a moment after the task opens — checklist items, attachments — its section opens by itself. A section you open or fold yourself stays that way until you close the task or open another; the next task starts from what it holds. A checklist's Complete area is the exception: it starts shut even when it holds items, because finished items are history, not work. Nothing about folding is remembered against your account any more.
The Email section
A task created by mailing it in carries that email with it — the This task came from an email card: who it was from, its subject, when it arrived, and Read the email to open the full message and reply using the follow-up workflow. It opens in its own Email section, just above Board — folded like the rest, glowing blue when there is one, and reading No source email when there is not. On a team board, anyone who can open the task at all can see this section; it carries no extra permission of its own.
The description already holds the key points. The same AI read that creates the task also writes the description as a short list rather than a copy of the message. Read the email still shows the whole message exactly as it arrived. With no AI key, the description is the email's own text instead.
Tags shows only what this task already carries, not your whole tag list every time — a task with none reads No tags on this task. rather than an empty box. Click Select more from… to see the rest and add one, Done choosing to go back to showing just this task's own. Click any tag to add or remove it; there is no separate save.
Connecting a task to an outcome
If your team uses OKRs, a task can say which outcome it supports. Open the task and tick Mark as an OKR — that checkbox is the way in, and with it unticked none of this appears.
Ticking it opens a picker straight away, because a task cannot be marked as an OKR without supporting one. Search the objectives your team already has, narrow them to a single quarter, or switch the picker to key results instead. If the one you want does not exist yet, Create objective and Create key result are in the same dialog, so you do not have to leave and come back.
If you close the picker without linking or creating anything, the checkbox turns itself back off and nothing is saved. That is deliberate: a task marked as OKR work that supports no outcome tells everyone reading the board something untrue. A task you have already linked is never asked again — tick, untick and tick once more and the picker stays out of your way.
On a team board, a brand-new task is the one case this cannot run: an outcome links to a task that exists, and yours does not until you save it. Save it first, then tick the box.
Unticking the box later hides the section; it never unlinks anything. Tick it again and the connection is still there.
Once connected, the task shows what it supports and how that measure is doing, with links straight through to the key result and to the objective above it. Linking changes nothing else about the task — not who can see it, not who it is assigned to. A private task linked to a team objective is still private.
The full workflow is described in Connecting a task to an outcome.
Sharing a task to a board
One task on two boards. The Team dropdown appears only if you are on more than one, and each row names the team its board belongs to.
- Select the task, open Where it lives in the details panel, and press Add it to a board… — or Change which boards if it is already on one.
- Tick each board it should appear on, then press Link.
- For a topic on each board, press Topics and more… instead. That opens the full task editor, which is where per-board topics are set — topics differ from board to board, so a task can sit under Roadmap on one and Platform on another.
You only see boards you are actually a member of — not every board your team has — because those are the only ones the database would let you share onto. Untick to remove it from a board; the task itself is never deleted. Untick every one of them and the button says so: it reads Remove from every board rather than Link, so the press that makes a task private again cannot be a surprise.
This small dialog deliberately leaves per-board topics alone: it never clears a topic a task already has, and it does not set one for a board you have just ticked.
Linking a task to an event
A task can be linked to an event — a weekly meeting, a publication, a due date your team keeps — so it shows up under that event on the Events page. It works for your own tasks and for team tasks, and for a task you already have as well as a new one. You see it only if you have Events access on at least one team.
- Open the task, then Where it lives in the details panel. The Board & Events field has an Event line. In the full editor it is the Board & Events section (it used to be called Board).
- Press Link to an event…, choose the event, then choose which date. It starts on the next date the event happens.
- Press Link. The task shows an event card with Open in Events, Change event… and Unlink, and the Where it lives tab gains an E chip.
A task links to one event date at a time. Choosing another event or date replaces the first; the picker says so before you confirm. The task’s own due date is never touched — linking, changing and unlinking leave it exactly as it was, because the due date and the event date are separate things.
Unlink keeps the task. It asks you to confirm in place, names the event and the date, and removes only the link. If the event has since been archived the card is dimmed and says so, and Unlink still works.
Which tasks can be linked: tasks you own, tasks you are watching, and existing tasks on the team boards you belong to. Someone who can only read a task you are watching can still link it. The same link can be made from the other side — see linking a task you already have.
Scheduling a meeting about a task
Open a task and its Details tab has a Schedule meeting… button right under Draft follow-up…; the full task editor's action row has it too, as does the task's … menu, a task card on the Calendar (its menu), and the card dialog on a team board. Hover the button and it says what it does: pick a day, find a free time on your calendar, then finish in Outlook. It opens the meeting dialog and finishes in Outlook (see the calendar manual). The Outlook meeting’s notes carry a link to the task. A meeting STRIDE sent earlier from the task is listed under the button as Meeting ·, with Open to edit or cancel it. The phone does not offer meetings. An outside address you add there is saved to your address book when you finish in Outlook.
Find a time is open in that dialog from every one of those places, including a task card on a future day (the card fills in 9:00 on its due date and lists that day’s open times): press Today, Tomorrow, a weekday or Pick a date…, then one of your open start times (every 30 minutes, 8:00 to 6pm on weekdays, where the whole Length fits; Show all for the rest). It sets Date and Start. The times come from your own Outlook calendar only; STRIDE opens the invite in Outlook and it is booked when you send it there. Find a time has the rest.
What the icons on a task row mean
Two rows. The second is a personal task with no board, no note and no objective — nothing is missing from it.
A row only shows what is true of that task — a personal task with no board, no note and no objective shows none of them, and that is a complete task, not an unfinished one. What it does show, you can act on:
- People icon and a board name — this task is also on that team board. Click it to open it there.
- Speech bubble and a number — how many comments it has. Click it to open the task straight on its conversation.
- Note icon — this task started as something you wrote in a note. Click it to open that note. If the note has since been deleted the icon stays and the link does not, because there is nothing left to open.
- Envelope — the task came from an email, whether you pasted one in or sent one to your task address. It says where the task came from and nothing more: the task keeps that fact for good, while the saved copy of the message itself is kept for 90 days, so the chip stays after the message it refers to has gone. Paperclip — it has attachments. OKR — it is marked as OKR work.
- Person icon, between the date and the person — somebody else created this task and assigned it to you. It is there so you can tell your own work from work handed to you without opening anything. Hover it, or read it with a screen reader, and it names who assigned it.
Overdue, and how it is kept out of today
Overdue is one of the figures in Work at a glance, and like every figure there it is a filter: press it and the list narrows to what is late, press it again to clear it. It turns amber only when there is something in it.
It is not part of today's progress — the progress figures for Today are about today's work, and a task from last week is not something you failed at today.
When Today has too much in it
Once Today holds more open tasks than your set limit, a short amber line appears at the head of the group — a remark, not a refusal: nothing is blocked. Set the number in Settings → Tasks, under The heavy day alert: Alert if Today has more than this many tasks (default five, 1–99, one number for your whole account). It follows you when you regroup. Group by status, by tag or not at all and there is no Today section for the line to sit under, so it moves to the very top of the list instead. It counts only the open tasks actually on screen.
Adding several tasks at once
+ Add task opens a line in the section you are adding to. The details panel steps out of the way while you type — it was showing the last task you opened, not the one you are writing — and comes back the moment the task exists, showing the new one. Type and press Enter, and the line stays open for the next one, so capturing five things off a call is five lines and no extra clicks; each task is selected, scrolled to and flashed once so you can see where it landed, while the cursor stays in the line ready for the next. Esc, or clicking away, closes it and puts the panel back exactly as you left it. Everything else about the task — due date, board, assignee, description — is there when you open it.
Getting to the board from a task in your list
A task that is also on a team board carries a small people icon on its row. Hover it and it tells you where: Shared with Roadmap · Product — open it there. Click it and you land in the team app, on that board, with the task open. Nothing is copied and nothing is moved — it is the same task, read from the other side. If the board is one you do not have access to, the icon still shows that the task is shared but does not offer to take you there. The sentence beside a connection like this is the explanation, with nothing separate to open.
If you can work on a team task without being on its board (you were added as a collaborator, or you own it), it opens in the task editor rather than the board's editor. You can still edit it and comment on it. The board's lanes and its other tasks stay with the board's members.
Work of yours that is out on a team board
The On team boards tab is your work that lives on a team board and is not on your own list — the complement of My tasks, not a slice of it. A task lands here one of two ways: you turned Show in my tasks off for it, or somebody else is its assignee and it is their list it belongs on. Either way it is still live work you own or are named on — it is only missing from the list you check day to day.
Do not confuse it with the On a board quick filter on My tasks — the names are close and the meanings are opposite. That filter narrows the same list you are already looking at down to the open tasks that ARE on it and also carry a board; press it and every row you see is still My tasks. On team boards is a separate tab, not a filter, because what it shows never was on that list to narrow.
The search box does narrow it: with Tasks chosen beside the search box, type and only the tasks on this tab whose title, description or assignee match stay on screen, the same search My tasks uses. Emailed tasks works the same way. The filters and quick chips do not apply to either tab. If nothing matches, the tab says Nothing matches your search and how many tasks the search is hiding.
This tab draws the same full task row as Watching — status, due date, tags and the rest — rather than a stripped-down line, and in Compact density each task is one line, same as My tasks and Watching: My tasks, Watching, On team boards and Completed all use this same one-line row, so one row idiom holds everywhere. Each row says which team and which board it is on — both, if it has been shared to more than one. A task that is also on a team board still carries the people icon described in getting to the board from a task in your list; open the task and its drawer's Where it lives tab carries Open on the board, which takes you straight to it in the team app, on the right board with the task open, and, for a task you can put back, Show in my tasks — which ticks the same Show in my tasks box the task editor has, so it reappears on your own list straight away and leaves this tab. The row menu is a faster route to the same thing, for the same tasks: on the On team boards tab, press … on the row and choose Show in my tasks directly, without opening the drawer — shown only for a task you own.
The tab carries a count of how many there are, and Completed now carries one too. Nothing here is lost or archived: it is live work, just not on your list.
Open work only. Once one of these is finished it leaves this tab and joins Completed, alongside everything else you have finished — so a task is never in both places, and finished work that was never on your list is no longer missing from both.
Completed is grouped by how recently you finished the work, not by calendar month: This week, Last week, 2–3 weeks ago, About a month ago, then Older. The week runs Sunday to Saturday — the same week the calendar draws. A group you have finished nothing in is not shown at all, and the date that decides the group is the day you completed the task, never its due date.
Tasks you completed before roughly the start of last month are not all loaded up front. The Older group starts folded and shows how many older tasks there are; a “—” means the count is still being worked out. Opening it loads the first 100. Show older loads more, and the line beside it says how many are in, for example 100 of 312 loaded. When everything is in, the button goes away and the line reads All 312 older tasks loaded. If a load fails, the rows already shown stay and Try again asks for the same page. Grouped by status, tag or not at all, the same Show older control sits at the end of the list. Searching Completed also searches older tasks that are not loaded, so a match from last year is found without opening anything first.
Tasks you are watching
Watching sits beside On team boards and holds the work you have asked to be told about. It is the answer to the thing none of the other tabs covers: that task is not mine, nobody has named me on it, and I still need to know when it moves. Start watching from the eye at the top right of a task on a team board — see watching a task — and press it again to stop.
A task is on My tasks or on Watching, never both. If it is on your list — you own it or it is assigned to you, with Show in my tasks on — it is not repeated here, even though you may be watching it. Watching is the work that is not on your list: what you chose to watch, tasks you collaborate on, and your own tasks you turned Show in my tasks off for, or handed to somebody else. You still get the same updates either way.
Opening a task never moves you to this tab. A link from an email, a note or Messages, or a search result, opens the task beside your list and leaves you on the tab you were on, usually My tasks, with the comments ready to reply to. The tab changes only when you press it.
Watching changes nothing about the task. It stays that person's task, with the same owner and the same assignee, and nobody is told you are watching it. You do not have to own it or be assigned it, and you cannot watch something you would not be allowed to open in the first place.
One exception: a task of your own can put you here too. Turn Show in my tasks off for something you own and you end up watching your own task, for exactly the reason every other row on this tab exists — so it keeps signalling to you if it goes quiet, instead of going dark the moment it leaves your list. Here is how to put a task back on your list: click the task to open it, and tick Show in my tasks again on the panel; it returns to your list and leaves this tab. The … menu on Watching does not carry it — opening the task is the way.
Every row here says why it is there. A small label beside the row reads You are a collaborator, Team task you are watching, Owned but opt’d to watch only or You assigned it to NAME, so a task that is not obviously yours never reads as one you cannot place.
Like the other tabs it carries a count, and a second N late badge, saying how many of them are past their due date.
The tab fetches every task you watch, including the ones that are nobody's but their owner's. This list otherwise holds your own tasks and the board tasks assigned to you — and a task you watch is often neither — so opening Watching goes and gets them. They read and open exactly like your own rows, and they count towards nothing else: your figures, your export and your calendar are still your own work.
Watched work you cannot open any more is called out. If one cannot be read — the request failed, or you have been removed from the board it sits on since you started watching it — a line at the foot of the list says how many and why, rather than quietly showing a shorter list that reads as though you had stopped watching them. Watched tasks that have been completed leave the tab: watching tells you while work is moving.
What actually happens when a watched task changes is a message: see updates on tasks you watch. A change you make yourself is not one of them — watching reports what other people do, so watching a task and then editing it produces nothing to read.
Merge two tasks
Two tasks that turned out to be one piece of work can be merged. One task keeps going; the other is completed and linked to it, never deleted, so nothing is lost.
Hold to merge. Drag a task by its row over the middle of another task and hold it there for about a second. While you hold, a ring fills on the target; when it is armed the target is outlined and says Release to merge; let go and Merge these two tasks? opens. A drop near the top or bottom edge of a row, or after a shorter hold, moves the task exactly as before, and so does a release over a task that cannot be merged.
From the keyboard, open the … menu on a task (Tab to it, then Enter) and choose Merge with…. It opens a picker; a task that cannot be merged is grayed out with its reason. On a team board the same gesture works on cards, and the card’s lane chip menu (or m on a focused card) carries Merge with… too — see moving a task without dragging.
The question. The popover shows two cards, Keeps going and Completed and linked, with a ⇄ button to swap them. With your AI Assistant on, it suggests which should keep going (marked AI); without one, the task with more in it — steps, comments, files, links, description — is kept. The suggestion only sets the starting choice, and you can always swap.
What comes across. The description (added under “Merged from …”), checklist steps and tags (duplicates are skipped), links (a task holds five at most), and watchers. Comments and files stay on the completed task, and the task that keeps going links to it. The completed task gets a comment, Merged with task “…”, and the kept one an event line saying what came in. Nobody is emailed or notified, and a repeating task does not spawn its next occurrence.
Merge does it (the button reads Merging… while it works); Not now changes nothing. Undo is offered for six seconds (⌘Z), and only to the person who merged, and only while neither task has changed since (other than by later merges into it that you have undone, in reverse) and nobody has replied to a merge comment — otherwise it says One of these tasks changed after the merge, so it can’t be undone automatically.
What cannot be merged, and why. Each refusal gives its reason:
- tasks on different boards (in All boards, cards from different boards cannot merge); a personal task cannot be merged with a board task;
- a task you only watch;
- completed or archived tasks;
- a task you only collaborate on can be the one that keeps going, never the one that is merged away;
- a personal task someone else owns and has assigned to you can be the one that keeps going, never the one that is merged away;
- tasks that are not on exactly the same boards (a task shared to an extra board only merges with one shared the same way).
You need to be able to open and edit both tasks under the usual rules; a team admin or Organization owner who is not on the board cannot merge its tasks. If someone edits either task while the popover is open, it says it changed meanwhile and nothing is merged; review and merge again.
The AI suggestion (Suggest which task to keep when merging) sends only the two titles, a short excerpt of each description and a few counts, never a name; see AI features. A merge never waits on it.
On a phone merging is not offered; the phone is a task list, not a board.
Emailed tasks: mail you did not have to open
Every email that reaches STRIDE from a recognized address is kept. Emailed tasks holds every inbound email that still needs you to say keep it or discard it, because STRIDE could not (or has not been asked to) turn it straight into a task. The only mail never kept is one STRIDE cannot match to any account — see creating a task by email.
The tab turns yellow and carries a count the moment anything is waiting; an empty tab still reads Emailed tasks 0, just uncolored.
- Accept keeps it — the task, already personal and due today, moves onto My tasks.
- Discard deletes it — the task and the saved message go together, confirmed first, and neither comes back.
A duplicate email is not merged or caught for you — it lands here twice, and discarding the one you do not want is how you clean it up. (Accepted tasks that turn out to be duplicates can be combined afterwards: see Merge two tasks.)
A row lands here either because your AI Assistant read the message and found no task in it (title and description are the raw subject and body of the message, not an extracted task), or because nobody read it at all — no team has inbound email on, or your account has no AI Assistant key — in which case the task carries the raw subject and body, with its description saying why nobody read it. Once accepted, it behaves like any other task, keeping the source message: see reading the email a task came from, and replying to it.
Accepting an email has your AI Assistant read it straight away. When you press Accept, STRIDE reads the saved email with your own AI key, once. The task's email card shows Analyzing the email… while it works. When it finishes, the task gets its summary of key points, a short title, and the staged work described below (your part, done when, and the steps). They appear on the task without a reload. A title or description you already changed is kept, and accepting the same email again never reads it twice. If you have no AI Assistant key, or inbound email is off for your teams, Accept just keeps the task as it is, with nothing about the AI shown.
What STRIDE stages for you
When the email asks something of you, the task arrives with the work laid out, not only a summary: a one-line ask, your part, a done when line, the people in the email by name, and the steps in the order they happen. Each step quotes the sentence it came from, so you can check it against the email.
The steps go into the task's checklist only when the model is confident and finds two or more. When it is less sure, they wait behind an Add steps button and the checklist is not touched. Steps that wait on someone else go under On hold, and any step can become its own task with Make a task.
Undo staging removes the staged steps you have not touched. People in the email appear as names only; STRIDE never assigns or invites them. Your display name is sent with the email so the steps can say you.
On the phone, a staged task's due date stays Today, with a small purple AI badge beside it. The task's sheet offers Use and Keep today beside the date, and it shows the one-line ask and the steps as read-only text. Clearing the date with No due date removes the offer at once. An undone staging shows nothing.
In the side drawer the written steps are listed read-only, with Open the task to edit these steps beside them. If they have since been removed from the checklist, the card says These steps are no longer in the checklist.
The AI suggested date
A task from an email always starts due today, so it sits at the top of your list. When the email names a time, such as mid-November or before the board meeting, STRIDE works out the date those words mean and offers it beside the date: a purple AI suggests line names the day and the email's own words, with Use and Keep today beside it. The model only copies the words; STRIDE decides what they mean. Before means the working day before. If no date can be worked out, the due date stays today and nothing is offered.
Use sets the suggested date, and the date then carries a purple AI date mark until you change it. Keep today keeps today and the offer goes, though the card still notes the suggestion. Changing the date by any other means removes the offer, so there is nothing to clear by hand. Undo staging puts a date you had used back to today.
When a reply arrives
Sometimes the next email in a conversation is about a task you already made from an earlier email. When your administrator has turned this on, STRIDE adds that reply to the existing task as an update instead of making a second task.
STRIDE matches a reply to a task of yours when it has the same subject as the earlier email, arrives within 30 days, and repeats most of what the earlier email said. A short forward that only carries a header and a signature does not count. Only email from your own address is ever added, and only to a task that is yours. So when someone else in the conversation replies, forward their reply to your Tasks by Email address: it joins your task, and the update says who wrote it, such as from Dana Ruiz, forwarded by you. A reply they send to STRIDE themselves never reaches your task.
The update card. Open the task and you will see an Update card with a short summary of what the new email adds, who it came from, and any new steps or a new date it asks for. Some things are added straight away: the reply's attachments, up to five of its links (a task holds five at most) and a line in the task's history. The new steps and the new date wait for you: they change your task only when you decide.
- Press Add steps to put the new steps in your checklist, or Not needed to skip them.
- Press Use [date] to take the new due date, or Keep current date to leave it. The card reads The email now asks for the new date, with your current due date beside it. Undo takes back what you accepted.
- Read the email opens the reply itself. If the saved copy has expired, the card says so.
If the AI Assistant could not read the reply (for example your account has no AI key), the card says so and still keeps the email.
The Update pill. On the task list, a task with an update waiting shows an Update pill. It goes away once you have decided or nothing is pending.
On your phone. The task sheet shows the same card, with the choices to use or skip the new date and to skip the steps. Undo and Make it a separate task are on the computer.
Make it a separate task. If STRIDE joined a reply to the wrong task, press Make it a separate task on the update. The email becomes its own task, with its links, and leaves the old one; the update then reads Moved to its own task and links to the new task. Files already added stay on the old task. Only the person who received the email sees this button.
Likely done. When a reply says the whole job is finished or no longer needed, such as Got the signed copy, we're all set., the update carries a purple Likely done block with those exact words quoted and who wrote them. Anyone in the conversation can say it, not only the person who asked. The task also shows a purple Likely done pill on the list. Nothing is completed for you. Press Mark complete and the task is completed exactly as if you had ticked it, with the usual Undo, which brings the suggestion back; Not yet keeps it open. STRIDE only raises it when the words are plain and the AI Assistant is sure. It stays quiet for thanks alone, I'll get to it, a question, done by Friday, mostly done, done for now, or one person's part, such as my part is done. A sentence asking anyone to mark, close or complete the task, and words in the older email a reply quotes (even under a quoted header in another language), never count; an email you forward does count. A later reply that only says thanks leaves it in place. If you cannot edit the task you see the quote, and its editors can mark it complete. Your phone's task sheet shows the same block. Completing the task by any other route also clears the suggestion.
A reply to a task you have already completed or archived never reopens it. It becomes a new task that begins Follows on from an earlier task. If STRIDE cannot add a reply for any reason, it becomes a new task as before. No email is ever lost.
Spotting what you can change
A small sliders icon beside a panel's title means that panel has settings you can change. Hover it to see what they are, or click it for a short list and a button that takes you straight to the right place in Settings.
You will find one on the clock, the weather, the calendar, the Analytics panel and the task editor. On the team board there is one on the task form. If a panel has no icon, it has no settings behind it — what you see on it is all there is.
What the Analytics panel shows
Your work
By status
By tag
Every one of those is a filter, and Overdue is the one switched on here. Press it again to clear it.
The Focus strip across the top of the Tasks page and the Calendar view is one row. It starts with the fold title, Work at a glance (shortened to Glance when room is short), then six counted chips — Open, Due today, Overdue, Starred, Due this week and Done this week — your quick chips and +, and, at the right, the list tools (Add, dates, Organize, Filter…, Collapse all). There is no separate filter row on the List. Click any chip to filter the list by it; click it again to drop it. Your tasks by status and by tag drop down from the chevron.
The chevron beside the title (press it, or Tab to it and press Enter or Space) opens and closes the two breakdowns; it is the same fold the side panels use, and the strip remembers how you left it (until you set it, it starts folded). On a narrow window the figures become a single row of the first few and More offers the rest as a menu of exactly the same filters. Nothing is lost to the narrow row; it is just offered differently.
What you have finished sits on the header, beside the date the app was last updated: how many you have completed in the last few weeks, and the average per week. Being on the header, it is still there when you fold the panel away.
Choose the period yourself in Settings → Analytics → Completed figures cover the last N days. Both figures follow it.
The two week charts have gone
The Load over the next 8 weeks chart and the weekly completed chart, and their on/off tickboxes, are gone — neither answered a question worth the room. Nothing you could learn from them is lost: the completed figures are on the header, the Completed tab lists the work itself, and the calendar still shows what is due when.
Week Agenda: a written brief of the week ahead
Week Agenda is a saved brief of your week, written by your AI assistant from your own tasks. Choose Actions › View › Week agenda… on Tasks — on the List, on the Calendar and in Calendar full screen it opens the same panel, one brief per week (on the Calendar, the week on screen).
It is written when you ask for it, not something that updates on its own. Opening it again shows what was already saved, instantly, with the time it was generated.
When it was made, and what changed since
The header shows when the agenda was generated, as an exact date and time plus how long ago. A chip beside it reads N tasks changed since or ✓ Up to date. Press the chip to list the changes, grouped as Added, Edited, Completed, Due date moved, Moved out of this week and Removed; it offers Regenerate with these changes and Keep this agenda. Checking costs nothing: it is counted from the tasks already on your page, with no AI call, and regenerating is always your choice. A past week shows Past week and no chip. An agenda made before this was added can show N+, because removals are not counted for it.
Generating one needs an AI assistant
Generate My Week Agenda only appears once one is configured in Settings → AI. Until then the panel offers Set Up AI Assistant in its place.
A brief you already have keeps reading fine
Only writing a new one needs an assistant — removing your key never takes away a brief you already generated.
Each week keeps its own brief; opening a week with none starts fresh, and it does not carry last week's over. Regenerate is a deliberate press, not something the panel does on its own, and a regeneration that fails leaves the brief you already had exactly as it was. The week runs Sunday through Saturday — the same week the calendar draws and the same one behind the Due this week figure above. If you think of your week as starting Monday, read the brief with that in mind.
This Week at a Glance
A small dashboard sits above the written sections: a bar per day showing what is scheduled, a Recommended Focus ring of what is due this week by kind — Top priorities, Quick close-outs and Could move, the same three sections written up below — counts across the top, and call-outs for your busiest day, overdue, and quick wins. Anywhere with something behind it is clickable. A day in the brief opens that day on the calendar — click a day's bar to open that day on the calendar, the same jump as elsewhere in the panel; click a slice of the ring, or its legend, to jump to the matching section below, which opens if you had closed it; click the quick wins call-out to jump to Tasks to close out, and click the busiest day call-out to open that day, the same as its bar. An empty day, slice or call-out is not a link. Each bar counts tasks with a due date that day, never meetings — this application keeps no meeting record.
What is in it
An executive summary, then sections that open when they have something in them and stay shut when they are empty. Opening or closing one lasts until you close the Week Agenda or change week; STRIDE does not remember it. They are Themes (what runs through the week's work), Priorities (what to tackle first), Tasks to close out (oldest, overdue or stale work — how overdue it is, how long it has been open, and how long since anything about it last changed — this application keeps no history of a task's past due dates, so nothing here claims a task was deferred or rescheduled), What could move to next week (a recommendation only; nothing is rescheduled for you, and a due date only changes when you change it yourself), and Suggestions. Every count comes from the application's own figures. The write-up is the assistant's reading of them; the numbers are not. A task in the brief opens the same task editor as everywhere else, and a day opens that day on the calendar.
Keyboard shortcuts
These keys work on every page — Tasks, Notes, Calendar, Team and OKRs — except the two that start a new task, ⌘⌥N and T, which work on Tasks only:
| Key | What it does |
|---|---|
| ⌘K / Ctrl+K | Search — tasks, notes, people, teams, boards and objectives, all at once |
| ⌘⌥N / Ctrl+Alt+N | New task, on the Tasks page only. It is not ⌘N: that combination is the browser's own “new window”, and Safari, Edge and Firefox take it before the page ever sees it |
| T | New task, on the Tasks page only |
| N | New note |
| R | Refresh — save what is pending, then re-read everything. It is a plain key rather than a combination because ⌘R is the browser's own reload and is not ours to take |
| V | Customize — open the panel for the page you are on, and press again to close it. It does nothing on a page that has no Customize panel |
| ? | Open this manual |
| ⌘⌥A / Ctrl+Alt+A | Fold the figures away and bring them back — Work at a glance on Tasks, Team at a glance on a board. On a page that has no such band it does nothing |
| ⌘⌥G / Ctrl+Alt+G | Move into the newest meeting reminder card, even while you are typing. It does nothing unless a reminder is open |
On the Tasks page L switches to the List and C to the Calendar (C does nothing where the calendar cannot draw, as on Emailed tasks); neither fires while a dialog is open. While the Calendar shows Week or Month, W hides or shows the weekend. A task row can be opened with Enter and ticked off with x. On the calendar, Shift + arrow moves a task to another day, so you never have to drag.
None of these fire while you are typing. If your cursor is in a task title, a description, a note or any other field, the keystroke goes to what you are writing.
They follow the key you press, not the letter printed on it, so they work on a non-QWERTY keyboard. ? works whether you reach it with Shift or with AltGr.
Making the clock smaller
The whole Time widget folds like every other one: press its heading and it collapses to a single line carrying the current time, and the room goes to whatever is under it. Press the heading again to bring the face back, and the choice is remembered with your account.
The widget’s menu has Show the clock face, which turns the small dial beside the time on and off; the choice follows your account. There is one clock face and no choice of style. The time it shows, the zone it is showing it in and the way clicking a time below it points the clock at that zone are all the same whether the widget is folded or open.
The calendar
The This month widget in the utility rail draws a stack of months. Click any date to filter the board to that day; click again to clear, or hold Shift for a range. A small dot under a date means something is due then.
How many months you see: Settings → Widgets, under Every rail, Months on the mini calendar offers one, two or three (default one), and that is exactly how many are drawn. The card never scrolls and has no height grip, so the height of the rail does not change how many months show. Its heading follows the count: This month, or The next 3 months.
Today is ringed; a selected date is filled in. The chevrons page a month at a time and Today jumps back to the current one. Works from the keyboard: arrow keys move between dates, Home/End for the first/last date shown, Enter/Space to select.
The Calendar view's bar ends with a Full screen calendar button (two diagonal arrows) that makes the bar and grid fill the window, and Exit full screen or Escape puts the page back. See Full screen.
In the Calendar's Day view, Customize › Day view › Beside the day puts this list to the right of the day. It keeps the same groups, due dates and drag between days, with Today, This week and All above it. See Day: tasks below the day, or beside it.
Show your Outlook calendar beside your tasks
STRIDE can draw your Outlook meetings on the Tasks calendar, so a day shows what is booked as well as what is due. It reads a link Outlook publishes; you do not sign in to Outlook from STRIDE. Only you see these events — never your team, never an AI assistant, and never counted as tasks.
Before you start: you need Outlook on the web or the new Outlook app (classic desktop Outlook has a different menu), and your organization must allow calendar publishing. If you cannot see Publish a calendar in step 2, even in the Outlook app, your IT team has turned it off.
Set it up in My Settings → Calendar → Outlook calendar, which opens with a three-step guide:
- Open Outlook's calendar sharing settings. In Outlook choose Settings (the gear, top right), then Calendar → Shared calendars. Can’t see Shared calendars? Some browser and company setups only show calendar publishing in the installed app: in Chrome use ⋮ → Cast, save, and share → Install page as app…, in Edge … → Apps → Install this site as an app, then open the Outlook app and go to Settings → Calendar → Shared calendars. If there is no install option, your organization has turned it off.
- Publish your calendar. Under Publish a calendar, choose the calendar (usually Calendar) and a level of detail: Can view all details (recommended) or Can view titles and locations show titles and locations in STRIDE; Can view when I’m busy shows only “Busy” blocks. Select Publish; Outlook shows an HTML and an ICS link.
- Copy the ICS link and paste it below. The ICS link ends in
calendar.ics. The HTML link (calendar.html) will not work — Microsoft only opens that page in its own window. If you paste an HTML link, STRIDE changes the ending to.icsfor you.
Paste the link and press Connect. The card then reads Connected · refreshed just now, with Refresh now, Replace link… and Disconnect. The link is never shown again and the field goes away. Replacing it keeps the current link working until the new one connects; Disconnect asks for confirmation first, and removes the link and the stored events. Your meetings are kept with your account, so they appear as soon as the calendar opens; STRIDE then checks Outlook for changes and only redraws what changed.
On the calendar. Your meetings show on every Calendar tab (My tasks, Watching, On team boards and Completed); only the tasks change with the tab. The bar reads + Outlook · Connect until you connect, and it opens this setup. Once connected, Customize › Outlook starts with the connection status and its Connect Outlook… or Manage in Settings… button, then shows Show Outlook meetings and Refresh now. Your choice to show or hide events is remembered. Events are gray with a dashed edge, read-only, and sit above the tasks:
- Week: a row per meeting; more than four shows +N more meetings, unless Show every meeting (Customize) is on, which shows every one.
- Day: every meeting, with start and end times.
- Month: a small ▦ N events count; click the day to see the list.
Press Enter on an event to open its card (Esc closes it); Open in Outlook there opens that day in Outlook. A web address in the card's Where line, such as a Zoom link, is a link: it opens in a new tab. When Outlook is published with Can view all details, the card also shows the meeting's notes (long notes fold behind Show more) and a Join button for a Teams, Zoom, Webex or Google Meet meeting, which opens in a new tab. STRIDE finds the link in the meeting’s link field, its location or its notes, so a Google Meet link in a Google Calendar invite works whether it is written with or without https://, and a dial-in number on its own never becomes Join. If a meeting has more than one link, the first one found is used. It shows the organizer and the people, with whether each accepted, is tentative, declined or has not replied (six at a time, then +N more), only when your calendar’s feed includes them. Outlook’s published calendar never includes who is invited, even at Can view all details, so for an Outlook calendar the card says Outlook’s published calendar doesn’t include who is invited; open the meeting in Outlook to see the participants. These are read for that one meeting when you open its card, kept only while the page is open, and never shown to anyone else or sent to an AI assistant. If they cannot be read the card says Couldn’t load meeting details with Try again; published at titles and locations, it shows only the basics. At the Full detail Calendar zoom each meeting's row also shows the first line of its notes, for meetings near today. Search hides meetings that do not match, and Focus mode hides them all. On the phone, your meetings are in the Calendar tab, one day at a time and read-only.
Free time. The Free time toggle in the Calendar bar (or Actions › View › Show free time) draws your open hours as green blocks inside the Week or Day you are on, and you can hold them. STRIDE emails you an invite for each block to accept in Outlook; it never writes to your calendar. See Free time and blocks.
Reminders. Once connected, STRIDE reminds you of your meetings by default: a card five minutes before a meeting and another when it starts, on every page except the phone. Remind me before meetings, How early and Desktop notifications sit on this card, under the status. See Meeting reminders.
Refreshing. STRIDE checks Outlook when you open the Calendar (or, with reminders on, any page) and when you come back to the tab, if your meetings are more than 15 minutes old, and again when you press the page’s Refresh; it never checks on a timer. Refresh now does it at once (never more than once a minute). It keeps about one month back to three months ahead, with title, time, all-day, location and busy or free — not notes, attendees or organizers. A change shows up after Outlook updates its published feed, which can take up to an hour. If Outlook cannot be reached the calendar says so and shows the events from the last refresh; after a week without a refresh they are hidden.
Keep the link private. The ICS link works like a password: anyone who has it can read your calendar without signing in. STRIDE stores it encrypted and never returns it to your browser. If it was shared by mistake, in Outlook go to Settings → Calendar → Shared calendars, choose Reset links under Publish a calendar, then press Replace link… in STRIDE and paste the new one; the old link stops working everywhere. To stop sharing, Unpublish in Outlook and Disconnect in STRIDE. Cached events are cleared after 30 days without use.
If something goes wrong. That isn’t an Outlook calendar link: use the ICS link, not your Outlook page’s address. Outlook no longer recognizes your calendar link: it was reset or unpublished, so copy the new ICS link and press Replace. Events an hour off, or a repeating meeting missing: compare one week with Outlook and report it. No Publish a calendar option: your organization has turned it off; you can still install Outlook as an app and snap it beside STRIDE, since Outlook cannot be shown inside another site.
Choosing the widgets on each page
Settings, on the Widgets pane. The dropdown picks which page you are configuring.
The clocks, weather, month and quick links live in the utility rail. Four surfaces carry it — Tasks, the Calendar view of Tasks (labeled Tasks · Calendar in Settings), the team board and Notes — and each keeps its own answer to whether the rail is there and which widgets are in it, all set in Settings → Widgets behind a dropdown listing the four pages; below it, a Show the utility rail on… switch named for the page it is set for, and a tick box per widget (Time, Quick links, Weather, This month).
A page you have never configured shows every widget, including any added later. Untick everything and that page has no rail content; a line under the list says where you stand, and Show every widget resets it.
Hiding the panel on one page no longer hides it on the others — the Show the Utilities panel switch in Customize › Utilities, the › arrow on the rail, and this pane are all the same answer for the page you're on.
Hide this widget, on a widget card's own menu, now means on this page too — it writes the same tick boxes, so a widget you put away here is still on the other three pages.
Customizing the rail
The rail has one header, Utilities, with a ••• menu named Utilities options and an arrow, ›, that hides the panel; a small tab at the page edge brings it back. The menu holds Customize…, Collapse all (or Expand all) and, on Notes, Placement. A card's own ••• menu carries Customize Utilities…. Both open the Customize panel at its Utilities section, whose summary line says how many cards and widgets are shown, for example 7 of 7 shown.
In that section, Show the Utilities panel shows or hides the whole rail, and the lists Widgets (and, on Notes and the Calendar, Cards for this note or Cards for this calendar) have a switch to show or hide each one and up and down buttons to move it; select a row and press Alt with an arrow key to move it from the keyboard. Utilities panel width and Months on the mini calendar are tagged All pages, because every rail uses them. Widget settings opens My settings. With every card hidden, the rail says Nothing is shown on this page.
Reset section returns each card to its own default fold, not all open, and clears hide, order and height on this page only. Shared width, seconds and the month count are not touched. An Undo is offered straight after. Changes on one page never change another page.
Putting the widgets in the order you want
The utility rail with every card folded. The square at the left of each heading is its drag handle; a folded card still says what is in it.
The order is set on the page itself, not in Settings, and each page keeps its own. Drag a widget card by the handle at the left of its heading, or focus its heading and press Alt with the up/down arrow; the … menu offers Move up/Move down too.
Collapsing a card is per page too. Press its heading to fold it away; the heading stays, so a folded clock still shows the time. Both the order and what you have folded are remembered with your account — they are still there next time you sign in, on that page, and nowhere else.
How tall a card is, is per page as well. Drag the grip at the bottom of a card to give it more room — a longer list of quick links, more of the forecast — and if its contents are longer than the height you chose, the card scrolls rather than pushing everything else down the rail. That height belongs to the page you set it on. Double-click the grip to hand the card back its own height. Time and This month have no grip: the clock is a readout and the month never scrolls. A card you have never dragged cannot run away with the rail either. Whatever you put in it, it stops at a sensible height and scrolls, rather than pushing every other card off the bottom; dragging it taller overrides that, and there is no ceiling you can bump into by hand.
What is still the same everywhere, because it is one rail: its width, seconds on the clock and how many calendar months to stack, all under Every rail at the bottom of the Widgets pane. What each widget contains — your time zones, your weather locations, your quick links — is still Settings → Time, weather & links.
The OKRs page carries the same rail but has no per-page arrangement of its own.
What each card shows
Quick links are tiles, each with a letter badge and the site beneath the name; + Add adds one in place, and Show all (N) expands the list when there are more than fit. Time shows a large time and date, your zone and its UTC offset, and your other zones with their ± hours from yours and a day or night mark; Show the clock face, in the widget’s menu, toggles the small dial. Weather shows what it feels like and the wind, with a unit on every number, and once the reading is over 20 minutes old the footer says updated N min ago with a Refresh beside it. This month never scrolls: how many months it draws comes from Settings, and the count is exact.
Hide the rail and a small ‹ tab stays on the right edge on Tasks, the Calendar and a team board. Press it to bring the rail back. On a narrow screen the rail is a drawer, as before.
Time zones
The clocks in the utility rail are yours to choose. Open Settings → Time, weather & links; Time zones is the first section in it, and the list there is the list the rail draws, in that order.
Each row has a tickbox and a drag handle. Switch a zone on to put it on the rail, off to take it off, Rename to call it whatever you like — HQ, Dublin office — and Delete to drop it from the list altogether. Add another from the Add a zone dropdown underneath.
The order is yours to set. Drag a row by its handle, or focus the handle and press Arrow Up or Arrow Down — the same control the weather locations, the team's topics and its swimlanes all use.
Everything is remembered with your account, so your clocks look the same on any computer. A zone in the rail is a control, not a read-out: press one and the clock face and the large time above it show that zone, and the choice follows you to every page.
Folding the list away
The zones sit under the clock in one Time widget, so they fold with it — see making the clock smaller.
Resizing the panels
The Task details panel on the left and the utility rail on the right can both be made wider or narrower. Put the pointer on the thin line where either one meets the task list — it lights up — then drag sideways. The task list gives up or takes back the space; the two panels never cover it.
Double-click the line to go back to the standard width. If you prefer the keyboard, tab to the divider and use the arrow keys — hold Shift to move faster, or press Home to reset.
Both widths are remembered with your account, so they come back the way you left them on any computer. Neither panel can be dragged so wide that the task list stops being usable, or so narrow that its own contents stop fitting.
Weather
Charlotte, NC
The Weather widget on the utility rail, opened out. Press its heading to fold it back to a single line.
The utility rail carries a Weather widget for cities you choose. The forecast strip shows as many days as fit. It is not a fixed number: the card measures the width it actually has and draws what will fit legibly. Drag the rail's divider wider, or drag the card taller, and the strip re-fits itself immediately — you do not need to resize the window or reload. It never drops below three days; below that the columns tighten instead.
- Open Settings → Time, weather & links and scroll to Weather.
- Type a city and state, click Add; if more than one place matches, you are asked which.
- Add as many as you like. Untick one to stop looking it up without losing it.
- Click Primary for the one the widget opens on; a dropdown lets you switch when more than one is active.
Use my current location, under the list, adds and makes primary the city you are in, keeping one entry that updates as you move. Only a rounded position is sent to look up the city name, never your exact position. Click the widget header to collapse it to one row; untick Weather in Settings → Widgets to remove the card. Readings are held for twenty minutes; ↻ fetches a fresh one.
Each saved location has two switches: one stops the lookup entirely, the other (Display in widget) turns off just the rail — the place keeps being looked up, and simply does not take a row on the widget — so you can follow more cities than you display. Drag a location by the grip (or Arrow Up/Down on it — the grip is a real button, so the keyboard works too) to reorder; the order decides what the widget opens on. You can save up to six places, matched by location rather than name; reach that limit and adding another says remove a saved location before adding another, rather than quietly dropping one of yours.
Momentum
The chip in the band under the top bar. Take five appears only while it is suggesting a break; press the chip itself to collapse it to just the count.
The chip in the band directly under the top bar, labeled Momentum, keeps a running note of what you've finished today, reacting to what you actually do — a run of completions, or clearing something old, each gets its own remark. Click to collapse it to a bare count; turn it off under Settings → Tasks, The momentum line.
After a good run in one sitting (a ~45-minute gap resets the count), the chip suggests a break — a suggestion only, nothing blocked. Take five acknowledges and clears it. Suggest a break after this many completions in Settings → Tasks sets the run length, or 0 to turn break suggestions off while keeping the rest of the chip.
Did you know? — tips about STRIDE
A short panel of tips about real STRIDE capabilities, each one a door to the Quick Start guide or the Help page that actually explains it. It sits on the Tasks page, between Momentum above and Work at a glance below, and only on a desktop (one tip, Want a quick look around Tasks?, starts the Show me around tour of the top controls; the first-run card has the same Show me around button) — Notes, the Calendar, a team board, the OKR board and the admin console never show it on their own, and neither does the phone.
Previous and Next move through the tips one at a time, with no timer — a tip stays put until you move it, and the panel resumes on the next tip after the one you last saw rather than restarting.
The first tip anyone meets is about STRIDE Mobile and always stays in the rotation: its information control opens a live preview of the real STRIDE Mobile app signed in as you, with Open Mobile View, Open in New Tab and a QR code — “Scan to open on your phone” — a QR code exists in the STRIDE Mobile preview dialog for exactly that. Scanning it opens the whole app, not the version with that button hidden: the preview you are looking at is cosmetically cut down, but what the phone opens is the real thing. The address printed under the QR code is the fallback, not as decoration, for a camera that cannot scan it.
Closing it asks what you mean
The × asks which of two things you meant: Hide for now stops it appearing until a random 10–15 future successful sign-ins pass — not a refresh, and not a second tab — or Never display again stops it for good — neither removes the feature, which opens the panel on demand any time from your initials menu → Help → Did you know?, alongside Help center and Quick Start guide, regardless of its dismissal state.
Dark mode and light mode
The sun/moon button in the top bar switches between dark mode and light mode, the same choice on every page. It is remembered per browser, not per account — your phone and laptop can differ. The sign-in page has one appearance only.
Where a custom color has been set, a third option appears beside Light and Dark: your own color wins over your team's. Set yours in Settings → Workspace → Appearance — type or pick a color, Save my color, Look at it now to preview. Use my team's default clears your own. Only a team administrator sets the team's color, and only you set your own, enforced in the database. Dark is the default everywhere, including on a phone. More about the team's colors.
Choosing the application font
Settings → Workspace → Appearance → Application font picks the typeface the whole application is set in, from ten choices. Until you choose one, STRIDE uses your device's own interface font (System Default), for text and headings alike. It changes immediately, with no reload, and applies everywhere: Tasks, Notes, Calendar, Team, OKRs, the phone, the admin console and these manuals. Unlike dark and light mode, this one follows your account. Choose a font on your laptop and your phone has it too, the next time you open it. Nothing is downloaded to make it work — every choice is either a typeface the application already loads or one your own device already has — so it costs nothing on a slow connection.
Some things deliberately do not change with it: The STRIDE mark and your team's own mark, which is the brand, not a preference; Keys, IDs and code, which stay fixed-width; Your email signature, shown in the face the people you write to will see; Text you have styled yourself inside a note., part of the note rather than part of your view of it; Printed notes and exported boards., set in a neutral face rather than in yours; and The sign-in page, which has one appearance and is drawn before we know who you are. Counts, times and dates do follow your font, with every digit the same width so columns still line up.
Two choices look slightly different on a phone or in the admin console. Grotesk, and the headings of Inter and Space Grotesk, use a typeface the application downloads; those two screens deliberately download nothing, so they substitute the closest face your device already has. Everything else is identical everywhere.
My settings, and what is in there
My settings is in the menu under your name, at the top right. The word my is doing work: it is your preferences, as opposed to Team Settings just below it, which is the team's, or a page's own settings line below that. It is grouped into panes:
| Pane | What it holds |
|---|---|
| Workspace | Theme, the application font, density, Focus and your default team (Theme and app font… in every Customize panel opens here). A button here takes you to the Widgets pane for the utility rail |
| Widgets | The utility rail, page by page — whether it shows on Tasks, on the Calendar, on the team board and in Notes, and which widgets each of those keeps. Then the things that are the same everywhere: rail width, seconds on the clock, how many calendar months to stack, and the order the widgets appear in. See choosing the widgets on each page |
| Tasks | Grouping, sorting, which side panels show and how wide, which quick actions you keep and in what order, the heavy day alert, whether the Links and OKR sections appear at all, the completed-chart window, and the momentum chip |
| Calendar | Your Outlook calendar connection, and meeting reminders: whether a card appears before each meeting, how early, and desktop notifications |
| Notes | Card or list layout, the group sections, both panel widths, the body/checklist split — and the note groups themselves |
| Tags | Add, rename, recolor and delete your tags, each shown with the number of items it is on — on N items counts all your saved tasks, older finished ones included, and shows “—” while it is counting. Deleting a tag also removes it from older tasks; if that cannot finish, the tag is kept so you can try again |
| Time, weather & links | Which zones the rail shows, in what order and what to call them; your weather locations; and your quick links — see Time zones and Weather |
| Which events email you — see Choosing what emails you | |
| AI | Your Anthropic API key, and a button that tests it — see AI features |
| Your data | What is stored, a CSV export, Import… — see importing your tasks from a file — Back up and restore — see backing up and restoring your own data — and what retention means |
| Account | Your name, doors to changing your password and email address, and below them the Organization card: your own membership in whatever Organization you belong to — your role, whether you can leave, and creating one if you belong to none. See Organization membership |
Everything here is per-account and follows you between browsers and devices, including the theme: choose Dark, Light or Custom on your computer and the phone shows the same. Nothing in Settings affects anyone else, even on a shared board. Settings that are genuinely about you — your time zones, your weather locations, your quick links, your email choices, your API key — are one value, read by every page.
Ask STRIDE has a button in the My settings header, before the close button. It opens the panel beside the dialog, which stays open. On a wide screen the panel is a full-height strip on the right and the dialog moves left to make room; on a narrower screen the dialog gets narrower instead. When you close Ask STRIDE the dialog goes back to its own size and place. It is set to the tab you are on: a chip such as My Settings › Calendar says so, and × on it clears the scope. Its starter questions are written for that tab. It sends only the name of the tab, never what is set in it, and you can still ask about anything. See what Ask STRIDE sends.
Every section starts folded
Each pane is built from cards — Theme, Time zones, Your data, and so on — and every one of them opens folded to just its title the first time you visit it. Click a title to open that card; a single Expand all / Collapse all button above the list opens or closes every card in the pane at once, and relabels itself the moment any one card stops matching the rest. The same is true of Team Settings — every card in every one of its tabs folds the identical way.
What you have opened is remembered only for this sign-in. Leave a card open and it stays open for the rest of the day — but sign out, or start a fresh session another day, and every card is folded again, on purpose.
Choosing what emails you
Settings → Email decides which things get you an email — it never affects the Message Center, signing in, or password resets.
Your teams set the normal behavior (Using team settings), one line per team, following whatever a team admin picks.
Your email signature
Your signature is edited in Account, where it can have formatting and images; see Your email signature. Settings → Email → Follow-up emails now only points there. The follow-up dialog puts it above the quoted email, through its [signature] chip. Leave it empty and your name goes there on one line. It is saved with your account, so it follows you between browsers.
The dialog shows your signature as a preview you can change for this one email: Remove leaves it out of this email, Link adds a link, and Reset puts back your saved signature. A link starts with https://, mailto: or tel:. Anything else is refused with the message A link starts with https://, mailto: or tel:. Save as my default keeps the changed signature for your next email. A dialog with no signature saved offers Add a signature in Account.
Choosing your own
Turn on Customize my email notifications for your own list across every team — ask for less (drop shared notes) or more: turn on comments even though no team of yours has. It is your inbox. The busier options say May generate more email beside them so you know before you pick one. A task I watch is updated turns on watched-task email specifically; watched updates always reach Messages regardless. Switch it back off and you go straight back to following your teams — the choices you made are kept, so turning it on again does not mean starting over.
Two things your own settings cannot do
If a team has email switched off, nothing you tick here overrides it — that is a team admin's switch. If a God Mode holder has switched application email off altogether, nothing sends until they turn it back on.
One email about a subject, not several
Where a God Mode holder has turned it on, STRIDE waits a short while before sending an email about a mention, assignment, shared note, ownership or watched/contributor update. Everything that arrives in that window goes into one email, which lists every update, oldest first. Each line says who did what, with a For you tag on anything addressed to you, and a quoted excerpt for a comment. An optional In short line, labeled as automatic, may sit above the list. The list never depends on the AI, so an AI outage only removes the In short line.
The subject reads N updates: <title>. A very busy burst (more than 25 updates) continues in a second email, and the first says so.
A watched task's update shows the value as it stands when the email is sent.
If an administrator has turned on withholding, which is on today, an email whose updates the AI judges add nothing new to what you were already told is not sent. The updates stay in the app. An email containing anything addressed to you (a mention, an assignment, a shared note, or becoming an objective's owner) is never withheld.
This never touches task reminders or account mail — reminders, sign-in, password resets, invitations and administrative messages always send immediately.
Who is emailed about a comment
Comments without an @mention are emailed to the task's owner, assignee, collaborators, contributors and watchers. Anyone you @mention gets the mention email instead.
Changes made anywhere, including from the phone, reach people watching the task.
An email that holds a comment is always sent, even if the changes in it would otherwise be held back as nothing new.
Task reminders, which work the other way round
Task reminders are on for every account by default, unlike everything above — reminders keep arriving unless somebody stops them. This tab carries a row for task reminders, sitting outside Customize my email notifications, so it is there whether you follow your teams or keep your own list.
Switching it off stops every task reminder addressed to you, on every task, without touching anything else — it is the only row here that starts switched on. The switch is about your inbox, not about the schedule: reminders you set for other people still reach them, and switching it back on restores yours with nothing to rebuild. To stop one reminder rather than all of them, work on the task instead — see email reminders on a task.
Which address an email arrives at is a separate question, and it lives in your account panel, not here — see where notification email goes. This tab decides whether; that one decides where.
Import your tasks — Actions → Import…, or Settings → Your data → Import…
What it is for. Bring a list of tasks into your own list from a Word document, spreadsheet or page of notes. Both doors (Actions → Import… on the Tasks page, and Settings → Your data → Import…, in a section of its own above Take a copy) open the same Import dialog with My tasks as the place it goes. A file of tasks that is really a STRIDE backup is recognized and the dialog sends you to Back up and restore instead.
What is this file? offers two answers here. A task list with columns (.csv, .xlsx or .xls) needs no AI
assistant: it matches your columns by name, you can correct them, and the review shows what is new, what will update a task already on your list and what is
unchanged, with a before and after for each. A row matches only your own tasks, by id, then description, then title; a task that lives on a team board is never changed from
here (import it there). Notes or a list of action items (Word, Excel, CSV or plain text) is read by your AI assistant — see
choosing an AI provider — and says Uses your AI key.
- Choose the answer, then the file.
- For a task list, check Columns (Map with AI is optional). For notes, press Read the file — the only moment the assistant is called — and it reads the file (a large file in several passes); you can cancel while it works and nothing is written yet.
- Review, and choose what to bring in — one row per task, each with a checkbox, and chips above the list that show the New, Will update, Unchanged and Not written rows; only checked rows import, and Skip them, only add new brings in only the new ones.
- Press Import. Tasks land on your list immediately as ordinary tasks.
What the assistant decides, and what the app decides
The assistant reports the names and timing words it finds; it never picks a person or works out a date itself — the app does both. A row with no owner or an unmatched owner lands on you, not Unassigned — that is different from importing onto a team board, since a personal list has exactly one person it can belong to. A blank cell never changes a task you already have. Due dates can be a time horizon (“2 weeks”); one landing on a weekend moves to Monday, and timing it cannot parse leaves the due date empty.
Undo, so you can fix the file and try again
Undo — on the last screen, and later in Import history for 30 days — removes the tasks that import created and puts back what it changed, leaving anything you have edited since, and says which. Safe to try an unfamiliar file, undo, fix it, and import again.
Taking a copy of your work
Settings → Your data, under Take a copy, offers
Export tasks and Export notes — each writes a
.csv, sent nowhere but your own browser. Tasks export the title, status, due
date, assignee, owner, tags, completion, board and creation date; notes export the title,
group, last update, tags and text.
The task export includes older finished tasks that are not loaded. It saves
any pending changes first; if that cannot happen it refuses and tells you why, rather than
writing a copy that is missing something.
It is a copy to read, not a file to load back. Import your tasks reads a file somebody else made; Back up and restore reads a file this app made, in whole.
The file holds your work, not your API key
It does not contain your API key. Files exported before September 2026 do carry an Anthropic key in plain text — if you still have one, treat it like a password or delete it. No file can ever set your key either; it lives in Settings → AI and nowhere else.
Back up and restore
Settings → Your data, under Back up and restore,
offers Back up my tasks and Restore tasks from backup (while your tasks load, each says Loading your tasks… and waits).
Do not confuse this with Export tasks / Export notes above — a backup is
the one file of the two this app can read back in (downloaded as
tasks-backup-<date>.csv, distinct from the plain export). Back
up my tasks downloads your personal tasks and notes, your tags, clocks and heavy
day number, and your preferences: layout and width settings, the app font, quick-link and
weather settings, and feature switches such as OKRs. It never carries your API
key. The backup includes older finished tasks that are not loaded, saves pending
changes first, and refuses with the reason if that cannot happen.
Restore asks Restore from backup? before
writing anything, and brings those preferences back too. Your default team returns only if
you are still an active member of that team, and which comments you have read is never
restored.
Restoring merges, it does not replace. A matching task, note or setting is updated in place — a saved task is updated even if it is not loaded, never duplicated; nothing already on your list is deleted; a new tag is created, an existing one is left alone.
No AI assistant needed
Unlike Import your tasks, a backup restore needs no AI key configured and works with none set up — it is plain, exact data, not a document to interpret.
What a restore does not bring back
A few display preferences from the older presentation of this app have no equivalent here and are left out of a restore rather than guessed at: whether its sidebar was folded, how many months its mini calendar showed, and its round clock's style. Nothing about your tasks, your notes or your tags is affected by that.
A backup holds your personal tasks, not a board's
A task on a team board already belongs there and is visible to everyone on it; a backup does not carry it, and restoring one never creates a copy of it on your own list.
A backup never contains your API key, and restoring a file that does have one does not set it here either — you are told it was found and left out. Your key lives in Settings → AI and nowhere else.
Organization membership — Settings → Account → Organization
Not the same as Organization settings (opened from the team name in the corner, for administering an Organization — owners and God Mode only). Settings → Account → Organization, a card below your profile, is your own membership, for every reader; an old link still opens the Account tab on this card.
- No Organization — Create an Organization makes you its first Owner. If an invitation to join one is already pending for you, a You have a pending invitation dialog warns (never blocks) that creating your own may complicate accepting it later.
- A Member, or one of several Owners — Leave Organization, confirmed first; the Organization is unaffected.
- The only Owner, with other members remaining — no Leave button at all; the dialog reads Transfer ownership before leaving and a picker lets you transfer ownership to another member right there; once that succeeds, Leave Organization appears for you like anyone else.
- The only Owner and the only member — this is the one case where Leave Organization is destructive, and the button says so. It permanently removes the Organization's Teams, Boards, Topics, Tags, Swimlanes, Groups, OKRs and Events. Your own Tasks, Notes and Calendar are not — they stay with your account, exactly as they were. You confirm by typing a short phrase the product shows you, naming the organization, so it cannot be typed from memory. This cannot be undone, and is also reachable from Close this Organization in Organization settings.
Leaving otherwise never deletes the Organization or its data. As long as somebody else remains affiliated with it, leaving is a membership change, not a destructive one. The one exception is the last bullet above: leaving as the Organization's only remaining person is a deliberate, irreversible exception to that rule, not a contradiction of it.
When the app is thinking
Anything that might take a moment — a Claude request, pasting a long email, a slow save — shows three pulsing dots and a short line saying what is happening, in the same place that area reports success or failure. If you see it, the app is working rather than stuck.
If something does fail, the message replaces the dots and stays put. Save failures also raise a red banner in the top bar, because the detailed status line lives inside Settings where you would not otherwise see it.